FSW Signal and spectrum analyzer

Setting standards for innovation and usability

FSW Signal and spectrum analyzer
FSW signal and spectrum analyzer, front view
FSW signal and spectrum analyzer, front view
Open Lightbox
FSW Signal and spectrum analyzer
FSW signal and spectrum analyzer, front view
FSW signal and spectrum analyzer, front view
Open Lightbox
FSW Signal and spectrum analyzer
FSW signal and spectrum analyzer, side view
FSW signal and spectrum analyzer, side view
Open Lightbox
FSW Signal and spectrum analyzer
FSW signal and spectrum analyzer, side view
FSW signal and spectrum analyzer, side view
Open Lightbox
FSW Signal and spectrum analyzer
FSW signal and spectrum analyzer, side view
FSW signal and spectrum analyzer, side view
Open Lightbox
FSW Signal and spectrum analyzer
FSW Signal and spectrum analyzer, back high
FSW Signal and spectrum analyzer, back high
Open Lightbox
FSW signal and spectrum analyzer, front view FSW signal and spectrum analyzer, front view FSW signal and spectrum analyzer, side view FSW signal and spectrum analyzer, side view FSW signal and spectrum analyzer, side view FSW Signal and spectrum analyzer, back high

Key facts

  • Unparalleled low phase noise and best sensitivity on the market
  • 8.3 GHz internal analysis bandwidth
  • 800 MHz real-time analysis bandwidth
  • SCPI recorder simplifies code generation
  • High dynamic range enables outstanding EVM performance
  • Design & Elektronik Award Innovator des Jahres
Get a Quote Configure your product

FSW signal and spectrum analyzer

Experience everyday excellence with the FSW, the high-performance signal and spectrum analyzer that redefines precision. Ideal for a variety of applications – from complex communication systems to RF components – this powerful analyzer is your trusted partner for reliable measurements and unparalleled phase noise performance. Whether developing high-performance radars or characterizing wideband components, the wide internal analysis bandwidth and exceptional accuracy of the FSW set signal analysis standards. You can trust the FSW for the most demanding tasks, day after day.

Quick links

Features & benefits

Superior RF performance

RF performance that meets exacting demands

The FSW redefines the top-of-the-line signal and spectrum analyzers, offering superior RF phase noise, displayed average noise level, intermodulation suppression and dynamic range for ACLR and harmonic measurements.

Phase noise
Open Lightbox

Phase noise

Phase noise at 10 GHz carrier frequency at 10 kHz offset from the carrier: typ. –133 dBc (1 Hz).

Phase noise
Phase noise - Phase noise at 10 GHz carrier frequency at 10 kHz offset from the carrier: typ. –133 dBc (1 Hz).

Advanced user interface

Designed for convenience  

  • 12.1’’ high resolution, multitouch display with gesture support - flat design with Windows 10 look and feel
  • Various measurements can be displayed simultaneously in separate windows, which makes result interpretation easier
  • Embedded SCPI recorder simplifies code generation for automatic, remote controlled measurements

Convenient user interface
Open Lightbox

Convenient user interface

Advanced FSW with 12.1 inch high resolution, multitouch display and much more.

Convenient user interface
Convenient user interface - Advanced FSW with 12.1 inch high resolution, multitouch display and much more.

Keep up-to-date in 5G development

In-depth 5G physical layer signal analysis  

  • The FSW scalable, wide internal analysis bandwidth of up to 8.3 GHz allows you to capture the entire bandwidth of the downlink signal and evaluate the complete system.
  • R&S®FSW-K144 and R&S®FSW-K145 options cover downlink and uplink in-band measurements of 3GPP 5G NR. Each signal subframe is analyzed and a wide range of measurement results are provided, including the EVM, frequency and power of different channels and signals.

R&S®FSW-K144 5G NR downlink application
Open Lightbox

R&S®FSW-K144 5G NR downlink application

R&S®FSW-K144 detects and sets many parameters automatically, giving you more time to concentrate on insights from the detailed analysis.

R&S®FSW-K144 5G NR downlink application
R&S®FSW-K144 5G NR downlink application - R&S®FSW-K144 detects and sets many parameters automatically, giving you more time to concentrate on insights from the detailed analysis.

Extensive radar analysis functions

Fast and comprehensive radar signal analysis  

In addition to wide analysis bandwidth (up to 8.3 GHz), FSW analysis functions essential for radar testing.

  • The R&S®FSW-K6 pulse measurement application measures all relevant pulse parameters at the touch of a key
  • The R&S®FSW-K6S time sidelobe measurement option measures pulse compression parameters
  • The R&S®FSW-K60/K60H option analyzes frequency hopping signals

R&S®FSW-K6 pulse measurement option
Open Lightbox

R&S®FSW-K6 pulse measurement option

The R&S®FSW-K6 pulse measurement application measures all relevant pulse parameters at the touch of a button.

R&S®FSW-K6 pulse measurement option
R&S®FSW-K6 pulse measurement option - The R&S®FSW-K6 pulse measurement application measures all relevant pulse parameters at the touch of a button.

Automotive radar signal analysis

Image-free wideband signal analysis in the E band  

The R&S®FSW85 signal and spectrum analyzer features a YIG preselector for frequencies between 8 GHz and 85 GHz, providing image-free spectrum analysis. The wide analysis bandwidth (up to 8.3 GHz) combined with the R&S®FSW-K60/-K60C transient analysis/chirp measurement option allows you to characterize up to 5 GHz wide FMCW signals such as those used in automotive radars.

Automotive radar measurements
Open Lightbox

Automotive radar measurements

FMCW signal with 2 GHz bandwidth at 77 GHz measured with the R&S®FSW-K60C option and the R&S®FSW-B2001 2 GHz internal bandwidth extension

Automotive radar measurements
Automotive radar measurements - FMCW signal with 2 GHz bandwidth at 77 GHz measured with the R&S®FSW-K60C option and the R&S®FSW-B2001 2 GHz internal bandwidth extension

Ideal for satellite RF testing

High-performance measurement solutions for designing, developing and testing satellite payloads, payload subsystems and components  

The FSW offers dedicated measurement applications for the most critical measurements such as group delay, linearity, gain transfer, noise power ratio (NPR), etc. It also demodulates satellite RF signals of several standards such as DVB-S2X and OneWeb. The FSW scalable, wide analysis bandwidth (up to 8.3 GHz) meets the increasing demand for wide signal bandwidths.

R&S®FSW-K17 multicarrier group delay measurements
Open Lightbox

R&S®FSW-K17 multicarrier group delay measurements

Measures absolute and relative group delay with high accuracy within milliseconds.

R&S®FSW-K17 multicarrier group delay measurements
R&S®FSW-K17 multicarrier group delay measurements - Measures absolute and relative group delay with high accuracy within milliseconds.

Real-time spectrum analysis

Don’t miss a thing with the real-time spectrum analysis option

The FSW real-time options allow users to reliably detect extremely short sporadic interference in the nanosecond range even in close proximity to powerful carriers – in a bandwidth of up to 800 MHz. Real-time spectrum analysis enables users to analyze existing frequency hopping algorithms and create alternative ones to prevent collisions between signals of different standards operating in the same frequency band.

Real-time spectrum of the ISM band at 2.4 GHz
Open Lightbox

Real-time spectrum of the ISM band at 2.4 GHz

Analyzes and prevents collisions between signals of different standards operating in the same frequency band (e.g. WLAN and Bluetooth®).

Real-time spectrum of the ISM band at 2.4 GHz
Real-time spectrum of the ISM band at 2.4 GHz - Analyzes and prevents collisions between signals of different standards operating in the same frequency band (e.g. WLAN and Bluetooth®).

Powerful vector signal analysis application

Digital signal analysis  

The R&S®FSW-K70 vector signal analysis option enables users to flexibly analyze digitally modulated single carriers down to the bit level. The clearly structured operating concept simplifies measurements despite a wide range of analysis tools.The R&S®FSW-K70M allows analysis of signals with two different modulation schemes, such as DVB-S2X signals.The R&S®FSW-K70P extension measures the raw bit error rate (BER) on PRBS data up to PRBS23.

Analysis of a 1024QAM modulated signal
Open Lightbox

Analysis of a 1024QAM modulated signal

Constellation diagram, result table, symbol table and EVM distribution.

Analysis of a 1024QAM modulated signal
Analysis of a 1024QAM modulated signal - Constellation diagram, result table, symbol table and EVM distribution.

Available models

Available models
Models
Frequency range
Phase noise
Max. analysis bandwidth

R&S®FSW8

Order number 1331.5003.08

Frequency range
2 Hz - 8 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
512 MHz
Get a Quote

R&S®FSW13

Order number 1331.5003.13

Frequency range
2 Hz - 13.6 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
512 MHz
Get a Quote

R&S®FSW26

Order number 1331.5003.26

Frequency range
2 Hz - 26.5 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
2000 MHz
Get a Quote

R&S®FSW43

Order number 1331.5003.43

Frequency range
2 Hz - 43.5 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
8312 MHz
Get a Quote

R&S®FSW50

Order number 1331.5003.50

Frequency range
2 Hz - 50 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
8312 MHz
Get a Quote

R&S®FSW67

Order number 1331.5003.67

Frequency range
2 Hz - 67 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
8312 MHz
Get a Quote

R&S®FSW85

Order number 1331.5003.85

Frequency range
2 Hz - 85 GHz (with R&S®FSW-B90G option: 2 Hz - 90 GHz)
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Max. analysis bandwidth
8312 MHz
Get a Quote

Available options

Performance
Product
Description
R&S®FSW-B4

Order number 1313.0703.02

Description

OCXO precision frequency reference

R&S®FSW-B8

Order number 1313.2464.02

Description

Resolution bandwidth up to 80 MHz

for R&S®FSW43 / R&S®FSW50 / R&S®FSW67 / R&S®FSW85
Export license required.

R&S®FSW-B8

Order number 1313.2464.26

Description

Resolution bandwidth up to 80 MHz

for R&S®FSW8 / R&S®FSW13 / R&S®FSW26

R&S®FSW-B8E

Order number 1338.6911.02

Description

Resolution bandwidth 40 MHz

R&S®FSW-B13

Order number 1313.0761.02

Description

Highpass filter for harmonic measurements

R&S®FSW-B25

Order number 1313.0990.02

Description

Electronic attenuator, 1 dB steps

for R&S®FSW8 / R&S®FSW13 / R&S®FSW26

R&S®FSW-B90G

Order number 1331.7693.02

Description

Frequency extension, 90 GHz

for R&S®FSW85 only;
without preselection for f > 85 GHz

Preamplifier
Product
Description
R&S®FSW-B24

Order number 1313.0832.13

Description

RF preamplifier, 100 kHz to 13.6 GHz

for R&S®FSW8 / R&S®FSW13

R&S®FSW-B24

Order number 1313.0832.26

Description

RF preamplifier, 100 kHz to 26.5 GHz

for R&S®FSW26

R&S®FSW-B24

Order number 1313.0832.43

Description

RF preamplifier, 100 kHz to 43.5 GHz

for R&S®FSW43 / R&S®FSW67
No export license required.

R&S®FSW-B24

Order number 1313.0832.49

Description

RF preamplifier, 100 kHz to 50 GHz

for R&S®FSW50
No export license required.

R&S®FSW-B24

Order number 1313.0832.51

Description

RF preamplifier, 100 kHz to 50 GHz

for R&S®FSW50
Export license required.

R&S®FSW-B24

Order number 1313.0832.66

Description

RF preamplifier, 100 kHz to 67 GHz

for R&S®FSW67
No export license required.

R&S®FSW-B24

Order number 1313.0832.67

Description

RF preamplifier, 100 kHz to 67 GHz

for R&S®FSW67
Export license required.

Analysis bandwidth
Product
Description
R&S®FSW-B40

Order number 1313.0861.02

Description

40 MHz analysis bandwidth

R&S®FSW-B80

Order number 1313.0878.02

Description

80 MHz analysis bandwidth

R&S®FSW-B160

Order number 1325.4850.14

Description

160 MHz analysis bandwidth

R&S®FSW-B320

Order number 1325.4867.14

Description

320 MHz analysis bandwidth

R&S®FSW-B512

Order number 1331.7106.14

Description

512 MHz analysis bandwidth

R&S®FSW-B1200

Order number 1331.6400.14

Description

1200 MHz analysis bandwidth

Not available for the R&S®FSW8 and R&S®FSW13. Not in combination with R&S®FSW-B2000.

R&S®FSW-B2001

Order number 1331.6916.14

Description

2000 MHz analysis bandwidth

Not available for the R&S®FSW8 and R&S®FSW13. Not in combination with R&S®FSW-B2000.

R&S®FSW-B4001

Order number 1338.5215.14

Description

4400 MHz analysis bandwidth

Not available for R&S®FSW8, R&S®FSW13 and R&S®FSW26

R&S®FSW-B6001

Order number 1338.5221.14

Description

6400 MHz analysis bandwidth

Not available for R&S®FSW8, R&S®FSW13 and R&S®FSW26

R&S®FSW-B8001

Order number 1338.5238.14

Description

8312 MHz analysis bandwidth

Not available for R&S®FSW8, R&S®FSW13 and R&S®FSW26

R&S®FSW-B2000

Order number 1325.4750.02

Description

2 GHz analysis bandwidth

R&S®RTO2044 / R&S®RTO1044 oscilloscope required. Not available for the R&S®FSW8 and R&S®FSW13.

R&S®FSW-B5000

Order number 1331.6997.85

Description

5 GHz analysis bandwidth

Available for the R&S®FSW85. R&S®RTO2064 oscilloscope required. Not available in combination with R&S®FSW-B2000.

R&S®FSW-B5000

Order number 1331.6997.43

Description

5 GHz analysis bandwidth

Available for the R&S®FSW43. R&S®RTO2064 oscilloscope required. Not available in combination with R&S®FSW-B2000.

External Mixing
Product
Description
R&S®FSW-B21

Order number 1313.1100.28

Description

LO/IF connections for external mixers

for R&S®FSW26 / R&S®FSW43 / R&S®FSW50 / R&S®FSW67

R&S®FSW-B21

Order number 1313.1100.86

Description

LO/IF connections for external mixers

for R&S®FSW85

Digital baseband
Product
Description
R&S®FSW-B17

Order number 1313.0784.02

Description

Digital baseband interface

R&S®FSW-B517

Order number 1331.6980.02

Description

DIG IQ 40G streaming out interface

R&S®FSW-B512/-U512/-B1200/-U1200/-B2001/-U2001/-B800R required

R&S®FSW-B1017

Order number 1350.7008.02

Description

DIG IQ 40G streaming out interface 1GHz

R&S®FSW-B1200/-U1200/-B2001/-U2001/-B800R required

Analog baseband
Product
Description
R&S®FSW-B71

Order number 1313.1651.13

Description

Analog baseband inputs, 40 MHz analysis bandwidth

for R&S®FSW8 / R&S®FSW13

R&S®FSW-B71

Order number 1313.1651.26

Description

Analog baseband inputs, 40 MHz analysis bandwidth

for R&S®FSW26 / R&S®FSW43 / R&S®FSW50

R&S®FSW-B71

Order number 1313.1651.67

Description

Analog baseband inputs, 40 MHz analysis bandwidth

for R&S®FSW67

R&S®FSW-B71

Order number 1313.1651.86

Description

Analog baseband inputs, 40 MHz analysis bandwidth

for R&S®FSW85

R&S®FSW-B71E

Order number 1313.6547.02

Description

80 MHz analysis bandwidth for analog baseband inputs

R&S®FSW-B71 required

R&S®FSW-B2071

Order number 1331.8302.02

Description

Oscilloscope baseband inputs

I/Q memory extension
Product
Description
R&S®FSW-B106

Order number 1331.6451.02

Description

I/Q memory extension, 6 GB

R&S®FSW-B160/‑U160/‑B320 required

R&S®FSW-B108

Order number 1331.6751.02

Description

I/Q memory extension, 8 GB

R&S®FSW-B1200, R&S®FSW-B2001 or R&S®FSW-B800R required

R&S®FSW-B124

Order number 1338.5273.02

Description

I/Q memory extension 24 Gbyte

Requires R&S®FSW-B4001, R&S®FSW-B6001 or R&S®FSW-B8001.

Extras
Product
Description
R&S®FSW-B10

Order number 1313.1622.02

Description

External generator control

R&S®FSW-B18

Order number 1313.0790.10

Description

Spare solid state drive (removable hard drive)

R&S®FSW-B112

Order number 1353.3290.02

Description

USB-B port for instrument control

Cellular systems
Product
Description
R&S®FSW-K10

Order number 1313.1368.02

Description

GSM/EDGE/EDGE evolution/VAMOS measurements

R&S®FSW-K72

Order number 1313.1422.02

Description

3GPP FDD (WCDMA) BS measurements (incl. HSDPA and HSDPA+)

R&S®FSW-K73

Order number 1313.1439.02

Description

3GPP FDD (WCDMA) MS measurements (incl. HSUPA and HSUPA+)

R&S®FSW-K76

Order number 1313.1445.02

Description

TD-SCDMA BS measurements

R&S®FSW-K77

Order number 1313.1451.02

Description

TD-SCDMA UE measurements

R&S®FSW-K82

Order number 1313.1468.02

Description

CDMA2000® BS measurements

R&S®FSW-K83

Order number 1313.1474.02

Description

CDMA2000® MS measurements

R&S®FSW-K84

Order number 1313.1480.02

Description

1xEV-DO BS measurements

R&S®FSW-K85

Order number 1313.1497.02

Description

1xEV-DO MS measurements

R&S®FSW-K100

Order number 1313.1545.02

Description

UTRA/LTE FDD BS measurements

R&S®FSW-K101

Order number 1313.1551.02

Description

EUTRA/LTE FDD UE measurements

R&S®FSW-K102

Order number 1313.1568.02

Description

EUTRA/LTE advanced and MIMO measurements (downlink)

R&S®FSW-K103

Order number 1313.2487.02

Description

EUTRA/LTE advanced UL measurements

R&S®FSW-K104

Order number 1313.1574.02

Description

EUTRA/LTE TDD BS measurements

R&S®FSW-K105

Order number 1313.1580.02

Description

EUTRA/LTE TDD uplink measurements

R&S®FSW-K106

Order number 1331.6351.02

Description

EUTRA/LTE NB-IoT downlink measurements

R&S®FSW-K118

Order number 1331.7370.02

Description

VERIZON 5GTF downlink measurements

R&S®FSW-K119

Order number 1331.8060.02

Description

VERIZON 5GTF uplink measurements

R&S®FSW-K144

Order number 1338.3606.02

Description

5G-NR downlink measurements

R&S®FSW-K145

Order number 1338.3612.02

Description

3GPP 5G-NR uplink measurements

R&S®FSW-K147

Order number 1338.6486.02

Description

5G NR combined ACLR/SEM/EVM measurements

Requires R&S®FSW-K144 or R&S®FSW-K145

R&S®FSW-K147C

Order number 1351.1355.02

Description

5G NR multi-CC combined ACLR/SEM/EVM measurements

Requires R&S®FSW‑K147

R&S®FSW-K148

Order number 1350.6624.02

Description

5G NR Rel. 16 extension for uplink/downlink measurements
 

R&S®FSW-K171

Order number 1350.7108.02

Description

5G NR Rel. 17 extension for uplink/downlink measurements

R&S®FSW-K175

Order number 1353.2642.02

Description

O-RAN measurements

Requires R&S®FSW-K144 or R&S®FSW-K145

Wireless
Product
Description
R&S®FSW-K8

Order number 1313.1351.02

Description

Bluetooth BR/EDR/LE measurements

R&S®FSW-K149

Order number 1350.6930.02

Description

HRP UWB measurements

R&S®FSW-K91

Order number 1313.1500.02

Description

WLAN 802.11a/b/g measurements

R&S®FSW-K91N

Order number 1313.1516.02

Description

WLAN 802.11n measurements

R&S®FSW-K91AC

Order number 1313.4209.02

Description

WLAN 802.11ac measurements

R&S®FSW-K91AX

Order number 1331.6345.02

Description

WLAN 802.11ax measurements

R&S®FSW-K91BE

Order number 1350.6730.02

Description

WLAN 802.11be measurements

R&S®FSW-K91P

Order number 1321.5646.02

Description

WLAN 802.11p measurements

R&S®FSW-K95

Order number 1313.1639.02

Description

WLAN 802.11ad measurements

R&S®FSW-K97

Order number 1338.4902.02

Description

WLAN 802.11ay measurements

General purpose
Product
Description
R&S®FSW-K7

Order number 1313.1339.02

Description

Analog modulation analysis for AM/FM/φM

R&S®FSW-K18

Order number 1325.2170.02

Description

Amplifier measurements

R&S®FSW-K18D

Order number 1331.6845.02

Description

Direct DPD measurements

R&S®FSW-K18F

Order number 1338.7230.02

Description

Frequency response and group delay measurements

R&S®FSW-K18M

Order number 1345.1470.02

Description

Memory polynomial DPD

(R&S®FSW-K18 and R&S®FSW-K18D options required)

R&S®FSW-K30

Order number 1313.1380.02

Description

Noise figure measurements

R&S®FSW-K40

Order number 1313.1397.02

Description

Phase noise measurements

R&S®FSW-K50

Order number 1325.2893.02

Description

Spurious measurements

R&S®FSW-K54

Order number 1313.1400.02

Description

EMI measurements

R&S®FSW-K54CAL

Order number 1331.5932.02

Description

CISPR calibration for R&S®FSW-K54

R&S®FSW-K70

Order number 1313.1416.02

Description

Vector signal analysis

R&S®FSW-K70M

Order number 1338.4177.02

Description

Multimodulation analysis

R&S®FSW-K70P

Order number 1338.3893.02

Description

BER PRBS measurements

R&S®FSW-K96

Order number 1313.1539.02

Description

OFDM signal analysis

Flexible analysis of custom OFDM and DFT-OFDM (SC-FDMA) signals down to bit level. 

R&S®FSW-K544

Order number 1338.2716.02

Description

User defined frequency correction by SnP file

Corrects frequency response (amplitude and phase) of measurement setup.

R&S®FSW-K553

Order number 1350.6118.02

Description

External frontend control

R&S®FSW-K575

Order number 1353.2894.02

Description

I/Q noise cancellation

Radar
Product
Description
R&S®FSW-K6

Order number 1313.1322.02

Description

Pulse measurements

R&S®FSW-K6S

Order number 1325.3783.02

Description

Time sidelobe measurements

R&S®FSW-K6 option required.

R&S®FSW-K60

Order number 1313.7495.02

Description

Transient measurements

R&S®FSW-K60C

Order number 1322.9745.02

Description

Transient chirp measurements

R&S®FSW-K60 option required.

R&S®FSW-K60H

Order number 1322.9916.02

Description

Transient hop measurements

R&S®FSW-K60 option required.

R&S®FSW-K60P

Order number 1353.2413.02

Description

Transient phase noise measurments

R&S®FSW-K60C or R&S®FSW-K60H option required.

Avionics
Product
Description
R&S®FSW-K15

Order number 1331.4388.02

Description

VOR/ILS measurements

Satellite systems
Product
Description
R&S®FSW-K17

Order number 1313.4150.02

Description

Multicarrier group delay measurements

R&S®FSW-K17S

Order number 1338.5896.02

Description

Subspan measurement for group delay

Requires R&S®FSW-K17, R&S®FSW-B512, R&S®FSW-B512R, R&S®FSW-B1200, R&S®FSW-B2001, R&S®FSW-B800R, R&S®FSW-B4001, R&S®FSW-B6001 or R&S®FSW-B8001.

R&S®FSW-K19

Order number 1331.8283.02

Description

Noise power ratio measurements

R&S®FSW-K201

Order number 1331.7387.02

Description

OneWeb reverse link measurements

Data over cable
Product
Description
R&S®FSW-K192

Order number 1325.4138.02

Description

DOCSIS 3.1 OFDM downstream

R&S®FSW-K193

Order number 1325.4144.02

Description

DOCSIS 3.1 OFDMA upstream

General
Product
Description
R&S®FSW-VSE

Order number 1345.2253.02

Description

Local VSE enabler

Real-time analysis
Product
Description
R&S®FSW-B512R

Order number 1331.7106.16

Description

Real-time spectrum analyzer, 512 MHz, POI ≤ 15 µs

Includes 512 MHz analysis bandwidth and 200 MHz IF filter. Export license required.

R&S®FSW-B800R

Order number 1331.6400.16

Description

Real-time spectrum analyzer, 800 MHz, POI ≤ 15 µs

Includes 2000 MHz analysis bandwidth. Not available in combination with R&S®FSW-B2000. Export license required.

R&S®FSW-K161R

Order number 1338.2700.02

Description

160 MHz real-time measurement application, POI ≤ 15 µs

R&S®FSW-B160 or R&S®FSW-B320 required. Not available for R&S®FSW-B512/-B512R/-B1200/-B2001/-B800R. No export license required.

R&S®FSW-K512RE

Order number 1338.4731.02

Description

512 MHz real-time measurement application, POI > 15 μs

Requires R&S®FSW-B512.

R&S®FSW-K800RE

Order number 1338.7801.02

Description

800 MHz real-time measurement application, POI > 15 μs

Requires R&S®FSW-B1200 or R&S®FSW-B2001.

Instrument security
Product
Description
R&S®FSW-K980

Order number 1350.6718.02

Description

Health and Utilization Monitoring
 

Service für R&S®FSW

R&S®FSW-B33

Order number 1313.3602.02

Description

USB mass memory write protection

R&S®FSW-K33

Order number 1322.7936.02

Description

Security write protection for solid-state drive

PC software
Product
Description
R&S®VSE

Order number 1345.1011.06

Description

Software

Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud

R&S®VSE-K544

Order number 1309.9580.06

Description

User-defined Frequency Correction by SnP File

R&S®FSPC

Order number 1310.0002.03

Description

Licence Dongle

R&S®FSPC-FL

Order number 1310.0002.04

Description

Floating license dongle

R&S®VSE-SWM

Order number 1320.7622.81

Description

Software maintenance

Radar
Product
Description
R&S®VSE-K6

Order number 1320.7516.06

Description

Pulse measurements application

R&S®VSE-K60

Order number 1320.7868.06

Description

Transient measurements

Transient analysis

R&S®VSE-K60C

Order number 1320.7874.06

Description

Transient chirp measurements

Transient analysis, requires R&S®VSE-K60

R&S®VSE-K60H

Order number 1320.7880.06

Description

Transient hop measurements

Transient analysis, requires R&S®VSE-K60

General purpose
Product
Description
R&S®VSE-K7

Order number 1320.7539.06

Description

Analog modulation analysis (AM/FM/φM)

Modulation analysis for AM/FM/φM modulated single carriers

R&S®VSE-K70

Order number 1320.7522.06

Description

Vector signal analysis

R&S®VSE-K96

Order number 1320.7922.06

Description

OFDM signal analysis

R&S®VSE-K18

Order number 1345.1434.06

Description

Amplifier measurements

R&S®VSE-K18D

Order number 1345.1440.06

Description

Direct DPD measurements

R&S®VSE-K18F

Order number 1345.1457.06

Description

Frequency response measurements

R&S®VSE-K18M

Order number 1345.1492.06

Description

Memory polynomial DPD

R&S®VSE-K70M

Order number 1345.1211.06

Description

Multi-modulation analysis

R&S®VSE-K70 option required

R&S®VSE-K70P

Order number 1345.1228.06

Description

BER PRBS measurements

R&S®VSE-K70 option required

Cellular systems
Product
Description
R&S®VSE-K10

Order number 1320.7574.06

Description

GSM measurements

GSM/EDGE/ EDGE Evolution

R&S®VSE-K72

Order number 1320.7580.06

Description

3GPP FDD measurements

WCDMA signal analysis

R&S®VSE-K100

Order number 1320.7545.06

Description

EUTRA/LTE FDD uplink and downlink measurement application

LTE signal analysis

R&S®VSE-K102

Order number 1320.7551.06

Description

EUTRA/LTE advanced and MIMO (downlink)

LTE signal analysis

R&S®VSE-K104

Order number 1320.7568.06

Description

EUTRA/LTE TDD uplink and downlink measurement application

LTE signal analysis

R&S®VSE-K106

Order number 1320.7900.06

Description

EUTRA/LTE

Narrowband IoT analysis

R&S®VSE-K144

Order number 1309.9574.06

Description

5G NR uplink and downlink measurement application

R&S®VSE-K175

Order number 1350.7020.06

Description

O-RAN measurements

Wireless
Product
Description
R&S®VSE-K91

Order number 1320.7597.06

Description

IEEE 802.11a/b/g measurements

WLAN signal analysis

R&S®VSE-K91P

Order number 1320.7680.06

Description

IEEE 802.11p measurements

WLAN signal analysis

R&S®VSE-K91N

Order number 1320.7600.06

Description

IEEE 802.11n measurements

WLAN signal analysis

R&S®VSE-K91AC

Order number 1320.7616.06

Description

IEEE 802.11ac measurements

WLAN signal analysis

R&S®VSE-K91AX

Order number 1345.1411.06

Description

IEEE 802.11ax measurements

WLAN signal analysis

R&S®VSE-K149

Order number 1345.1463.06

Description

HRP UWB measurements

External mixers
Product
Description
FS-Z60

Order number 1048.0171.02

Description

Harmonic Mixer 40 GHz to 60 GHz (U band)

FS-Z75

Order number 3638.2240.02

Description

Harmonic Mixer 50 GHz to 75 GHz (wideband signal analysis)

FS-Z90

Order number 3638.2270.02

Description

Harmonic Mixer 60 GHz to 90 GHz (wideband signal analysis)

FS-Z110

Order number 3638.2292.02

Description

Harmonic Mixer 75 GHz to 110 GHz (wideband signal analysis)

FS-Z140

Order number 3622.0708.02

Description

Harmonic Mixer 90 GHz to 140 GHz

FS-Z170

Order number 3622.0714.02

Description

Harmonic Mixer 110 GHz to 170 GHz

FS-Z220

Order number 3593.3250.02

Description

Harmonic Mixer 140 GHz to 220 GHz

FS-Z325

Order number 3593.3267.02

Description

Harmonic Mixer 220 GHz to 325 GHz

Noise sources
Product
Description
R&S®FS-SNS18

Order number 1338.8008.18

Description

Smart noise source 10 MHz to 18 GHz

R&S®FS-SNS26

Order number 1338.8008.26

Description

Smart noise source 10 MHz to 26.5 GHz

R&S®FS-SNS40

Order number 1338.8008.40

Description

Smart noise source 100 MHz to 40 GHz

R&S®FS-SNS55

Order number 1338.8008.55

Description

Smart noise source 100 MHz to 55 GHz

R&S®FS-SNS67

Order number 1338.8008.67

Description

Smart noise source 100 MHz to 67 GHz

R&S®FS-SNS90

Order number 1338.8008.90

Description

Smart noise source 60 GHz to 90 GHz

R&S®FS-SNS110

Order number 1338.8008.11

Description

Smart noise source 75 GHz to 110 GHz

R&S®FSW - Media center

R&S®FC330ST/SR: Push the boundaries in the H band

01:50

R&S®FC330ST/SR: Push the boundaries in the H band

Ready to push boundaries in the H band? Discover how you can extend the frequency range of your signal and spectrum analyzers to 220-330 GHz with Rohde & Schwarz.

04-Dec-2024

The art of signal generation

02:20

The art of signal generation

11-Oct-2024

#Think Six - Channel measurements in the D-band

04:51

#ThinkSix - Channel measurements in the D-band

High frequencies completely new to mobile radio mean that researching channel characteristics to determine the effects on transmitted signals of propogation delays resulting from reflection, and losses due to scattering, are a major requirement for 6G research. In this video we demonstrate a test setup for channel sounding in the D-band.

15-Dec-2022

Easy and optimized EVM measurement of 5G NR signals

04:43

Easy and optimized EVM measurement of 5G NR signals

EVM is an important figure of merit when testing DUTs. Customers expect test equipment to deliver excellent EVM performance out of the box, without the need for extensive configuration and calibration procedures.

13-Sep-2022

5G NR Testmodel Generation and Analysis

1:04

5G NR Testmodel Generation and Analysis

The video shows the generation and analysis of a 5G NR TM3.1 test model based on the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer.

12-Aug-2019

5G NR Signal Generation and Analysis

1:58

5G NR Signal Generation and Analysis

The video demonstrates how to quickly verify components with different important 5G NR physical layer parameters using the 5G NR generation and analysis options of the R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer.

12-Aug-2019

5G NR Inband Selectivity Measurement

1:41

5G NR Inband Selectivity Measurement

In this video, we demonstrate the multi-baseband capability of the R&S SMW200A vector signal generator to generate the wanted and the interfering signals for FR2 in one instrument.

12-Aug-2019

How to meet 5G NR non-standalone (NSA) mode testing challenges

03:43

5G is now - How to meet 5G NR non-standalone (NSA) mode testing challenges

Get deeper information on one of the access procedures of 5G – the non-standalone mode.

01-Aug-2019

View more

Application videos

Wideband modulated measurements with the R&S®SFI100A Vector Signal Generator

05:17

Wideband modulated measurements with the R&S®SFI100A Vector Signal Generator

This video shows how the R&S®SFI100A simplifies modulated measurements at IF and in the sub-terahertz frequency region in combination with the R&S®FE110ST/FE170ST frontends.

11-Jun-2024

Towards 6G: MIMO measurements up to 110 GHz

01:40

Towards 6G: MIMO measurements up to 110 GHz

This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz.

12-Mar-2024

Towards 6G: Wideband sub-THz communication testing

02:14

Towards 6G: Wideband sub-THz communication testing

Watch this video to learn about solutions developed to meet bandwidth needs for demanding applications such as early 6G research

12-Mar-2024

#Think Six - Channel measurements in the D-band

04:51

#ThinkSix - Channel measurements in the D-band

High frequencies completely new to mobile radio mean that researching channel characteristics to determine the effects on transmitted signals of propogation delays resulting from reflection, and losses due to scattering, are a major requirement for 6G research. In this video we demonstrate a test setup for channel sounding in the D-band.

15-Dec-2022

Beyond-FR2 signal generation&analysis and new 5G NR Release 17 features

3:08

Beyond-FR2 signal generation & analysis and new 5G NR Release 17 features

The video highlights the pre-launch of the new 67 GHz frequency option for the R&S®SMW200A. The demo covers 5G NR Release-17-compliant signal generation and analysis with new bandwidth and SCS requirements. Signals are transmitted at frequency ranges beyond FR2, at around 60 GHz.

17-Jun-2021

Tailored OTA BTS test solution for FR2

1:52

Tailored OTA BTS test solution for FR2

Rohde & Schwarz introduces the R&S FE50DTR (dual transmit / receive) frontend modules. The frontends enable the up and down conversion of signals up to 50 GHz, while providing low-loss transmission at the lower IF frequency. The result is higher sensitivity on the receiver path and more power on the transmitter path. The modules can be mounted close to the OTA test chamber and provide excellent RF performance at a competitive price

16-Jun-2021

Automotive radar signal analysis in the E-band

1:58

Automotive radar signal analysis in the E-band

Automotive radar signal analysis in the E-band with up to 8.3 GHz analysis bandwidth with just a single instrument.

20-Jan-2021

5G NR signal generation in the new 47 GHz frequency band

03:52

Demystifying 5G – 5G NR signal generation in the new 47 GHz frequency band

Watch this video to explore its underlying performance while measuring error vector magnitude (EVM) of a 100 MHz wide 5G NR signal at 47.2 GHz.

10-Dec-2019

View more

Webinars

Webinar: Increasing utilization and optimizing cost of test equipment

Increasing utilization and optimizing cost of test equipment

Monitoring test equipment connected to the network is necessary to increase the overall instrument utilization, avoid downtimes and optimize costs.

More information

Solutions for

Components
Components

Solutions to optimize the performance of your components and devices

More information

Wireless communications testing
Wireless communications testing

Leading solutions for today and tomorrow's connected world

More information

Aerospace & defense testing
Aerospace & defense testing

Measurement solutions for applications including Satellite, Radar/EW and Avionics

More information

Automotive network testing
Automotive network testing

Debug all protocol networks commonly used in the automotive industry.

More information

Related products

R&S®GSACSM communication system monitoring, screenshot

R&S®GSACSM
R&S®FSVA3000 Signal and spectrum analyzer, Front Low

R&S®FSVA3000
R&S®FSV3000 Signal and spectrum analyzer, Front Low

R&S®FSV3000
R&S®ELEKTRA Test Software, Screenshot

R&S®ELEKTRA
R&S®SMW200A vector signal generator, hero view

R&S®SMW200A
R&S®FSWP phase noise analyzer and VCO tester, front low

R&S®FSWP

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.