8306 Results
The most common abbreviations used in the standards for digital TV: MPEG2, DVB and ATSC
20-Jul-2001 | AN-No. 7BM27
WiMAX: IEEE 802.16e-2005 Introduction to OFDMA Measurements
23-May-2007 | AN-No. 1EF58
This application note describes how to use the generic interface in R&S®AdVISE for remote operation.
19-Jun-2020 | AN-No. 1S002
Pulse Train Master for the R&S Signal Generators
10-May-2011 | AN-No. 1MA148
Automatic Emitter Creation from User Data for Mission Data File Testing
01-Jul-2021 | AN-No. 1GP131
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
This application note is a systematic guide to help test engineers configure the Vector Network Analyzer in order to perform compliance test on Automotive Ethernet cables according to the Open Alliance TC9 standard.
13-Aug-2019 | AN-No. GFM323
Conducted multistandard in-device coexistence testing - ApplicationCard
19-Feb-2018
Models: R&S®TLU9 Transmitter 5 W, R&S®TLU9 Transmitter 10 W, R&S®TLU9 Transmitter 15 W, R&S®TLU9 Transmitter 25 W, R&S®TLU9 Transmitter 50 W, R&S®TLU9 Transmitter 100 W, R&S®TLU9 Transmitter 200 W, R&S®TLU9 GapFiller 5 W, R&S®TLU9 GapFiller 10 W, R&S®TLU9 GapFiller 15 W, R&S®TLU9 GapFiller 25 W, R&S®TLU9 GapFiller 50 W, R&S®TLU9 GapFiller 100 W, R&S®TLU9 GapFiller 200 W
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and R&S®ZNBT families.
11-Jul-2019 | AN-No. 1EZ82
R&S®CMWcards is an intuitive and user-friendly software application that makes NB-IoT OTDOA positioning design verification easier than ever.
26-Nov-2018
In this application note we discuss potential 5G waveform candidates, list their advantages and disadvantages and compare them to OFDM.
10-Jun-2016 | AN-No. 1MA271
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF performance tests (TS 38.141-1), according to Release 16, can be performed quickly and conveniently with signal generators from Rohde & Schwarz
24-Oct-2019 | AN-No. GFM315
Read this application card to learn more about what the 10BASE-T1S Ethernet compliance test offers and how it ensures reliable operation and functionality.
15-May-2020
Usage of VISA for instrument control with USB and ethernet
28-Oct-2021 | AN-No. 1SL374
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
With the R&S®Pulse Sequencer radar simulation software, users can easily and intuitively create scenarios for simulation of angle of arrival (AoA).
02-Apr-2020
Characterize radar warning receivers with advanced triggerbased multichannel pulse analysis, using the R&S®VSE-K6A and a Rohde & Schwarz oscilloscope.
02-Mar-2021
The Yamaha® MP Series combined with the R&S®ZNBT vector network analyzer measure the high frequency characteristics of a production lot at high speed and high accuracy.
27-Jan-2020
Testing radar warning equipment in realistic scenarios is crucial to reliable field performance. Commercial vector signal generators (VSG) such as the R&S®SMW200A from Rohde & Schwarz have become a very attractive alternative thanks to their increased available bandwidth and processing power.
13-Aug-2020
The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.
19-Oct-2020
The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,
01-Aug-2017 | AN-No. 1MA289
Software tool for fast and repeatable optimization of signal analyzer RF front-end settings
The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.
24-Jan-2022 | AN-No. 1EF111
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
16-Jun-2015 | AN-No. 1EF92
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.
18-Apr-2016 | AN-No. 1EF93
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
With its small footprint, the R&S®ATS1000 antenna test system is the ideal direct far-field OTA system to test phased array antennas.
12-Mar-2020