8306 Results
radiated conformance testing according to TS 38.141-2, Rel. 16
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
30-Jun-2020 | AN-No. GFM325
This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.
19-May-2021 | AN-No. GFM362
Rohde & Schwarz presents a customizable solution for testing barometric performance to ensure z-axis accuracy in line with FCC regulations.
24-Jun-2021
The R&S®FSW signal and spectrum analyzer facilitates swept spectrum analysis of next generation SARs with true preselection, finer range resolution and image rejection.
16-Apr-2021
The R&S®FSW and R&S®SMW200A are leading hardware solutions for 5G NR base station tests - set up all required parameters in no time with just a few clicks.
25-May-2021
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
26-Jun-2020 | AN-No. GFM343
The R&S®RTP/R&S®RTO and R&S®VSE meet the need to verify 5G NR MIMO signals and the signal characteristics of beamforming quickly and coherent.
04-Mar-2020
30 dBm + 30 dBm = 60 dBm? It is well known that it is not as easy as that.
This application note supplies a free of charge software tool that can e.g. be used to add or subtract an arbitrary number of power, to convert power and voltage units from the linear to the logarithmic scale.
10-Dec-2018 | AN-No. 1GP77
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
This application note provides information how to perform spectral emission measurements on UWB signals with spectrum analyzers using wide bandwidth RBW filters.
28-Jun-2021 | AN-No. 1EF109
This application note provides a description of the Rohde & Schwarz Click Rate Analyzer software.
15-Jan-2015 | AN-No. 1EE25
The arbitrary waveform feature o Rohde & Schwarz solutions allow you to simulate device behaviors and replaces basic standalone arbitrary waveform generators.
04-Nov-2019
Level Uncertainty Calculation for R&S FSV Signal and Spectrum Analyzer
21-Apr-2010 | AN-No. 1EF63
Interference hunting in TDD networks
03-Feb-2020
The Rohde & Schwarz oscilloscope R&S®RTO2064 with powerful FFT analysis is great for EMI debugging and a low cost solution for R&D testing.
14-Jan-2021
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
Rohde & Schwarz presents the R&S®ATS1000 antenna test system, a highly accurate solution for testing 5G antennas up to mmWave frequencies in a mobile shielded chamber.
17-Oct-2017
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
This application note describes test procedures for terrestrial broadcast sound receivers for conformance with the radio equipment directive of the EU, according to EN 303345.
29-May-2020 | AN-No. 1GP117
The R&S®NGL200 and R&S®NGM200 can simulate battery cells when testing battery management systems and replace far more expensive dedicated battery simulators.
08-Jun-2020
Primer
selection of appropriate RF power sensor
26-May-2021
High dynamic range current measurements on IoT devices
01-Oct-2019
Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.
18-Mar-2019
Discover the easy-to-use test solution for high speed multichannel acquisition for 5G NR signals from Rohde & Schwarz.
25-Feb-2020
This application note shows how to use Rohde & Schwarz signal generators and analyzers for testing early 5G New Radio components, chipsets and devices. Methods for easy creation and analysis of custom OFDM are explained.
23-Oct-2017 | AN-No. 1MA308
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314
Radar technology is essential for state-of-the art and future vehicles on the path to full autonomous driving. Radar sensors deliver critical information about the surrounding traffic environment or monitor the interior of the vehicle. As safety-relevant parts, radar sensors must adhere to specifications and regulations.
12-Dec-2022
Linking EDA design simulation and hardware testing to enable an easy, straightforward process flow and first-pass design.
16-Aug-2021
Current radar development is focusing on the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system.
20-Nov-2014 | AN-No. 1MA234