8306 Results
This application note expands modulation bandwidth up to 2 GHz and covers both V- and E-band examples.
18-Jun-2015 | AN-No. 1MA257
RF system noise contributions define receiver capabilities and sensitivity. The noise figure measures how the critical components affect the signal.
28-Jan-2022
Thanks to their multichannel capability, oscilloscopes are ideal for multichannel applications such as the analysis of MIMO, multi-antenna radar and differential high-speed digital signals.
06-May-2020
With high precision, an intuitive user interface and uncertainty bands provided directly on the screen, the R&S®ZNA takes accuracy to a new level.
19-Jul-2021
In this paper we will review the basics of spurious measurements and how the parameters used can affect the detection performance.
14-Jul-2017 | AN-No. 1EF97
The R&S®SMBV100B delivers precise synchronization information for communications in C-V2X mode and very accurate position information to the device under test.
18-Nov-2019
GPIBShot - Taking Screenshots via IEEE Bus
28-Aug-2009 | AN-No. 1MA25
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
The R&S®ZNL is able to characterize a broad range of impedances with the lowest uncertainty among its competitors in the same class.
02-Oct-2019
This document provides information on the techniques used to calibrate the FSMR3000 signal source. It also describes the process used to remove measurement uncertainties.
31-Dec-2021 | AN-No. 1SL377
This application note describes a measurement-based development methodology by which the Doherty Amplifier may be enhanced.
26-Sep-2016 | AN-No. 1MA279
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
Verifying RF ports is crucial for minimizing lost power and maximizing battery life. The R&S®FPC1500 is an easy-to-use and costeffective tool for this type of verification.
05-Mar-2020
This application note explains how to generate phase coherent signals with a compact easy-to-use solution.
07-Sep-2016 | AN-No. 1GP108
Define the exact current profile to minimize your electronics device´s power consumption with the R&S®NGM200 power supply series.
10-Dec-2020
Obtain fast data reading for realtime filter tuning with the R&S®ZNB vector network analyzer from Rohde & Schwarz.
27-Nov-2019
This document describes the unique application of Rohde & Schwarz VNA to fully characterize the passive part of multi-element antennas.
20-Mar-2017 | AN-No. 1MA278
This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.
16-Jun-2020
The R&S®RTH-K38 user scripting software option makes the R&S®ScopeRider RTH handheld oscilloscope a powerful tool for maintenance and service applications.
06-May-2020
Use R&S®RTP high-performance oscilloscopes and the R&S®VSE-K6A phased array measurement option for analyzing deceptive jamming techniques and automating jamer testing.
12-Jul-2021
The R&S®RTP and R&S®RTO2000 oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.
31-Mar-2021
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
This Application Note provides guidance on using the “Intermodulation Wizard” through an example measurement.
27-Mar-2013 | AN-No. 1EZ63
This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.
08-Dec-2021 | AN-No. 1SL375
This application note describes methods using an R&S®ZVA network analyzer to accurately measure all the key parameters of frequency converters.
30-Apr-2015 | AN-No. 1MA224
The R&S®RTO digital oscilloscope analyzes RF pulses up to the maximum bandwidth of the instrument used.
09-Nov-2017
Noise Figure Measurement without a Noise Source on a Vector Network Analyzer
27-Oct-2010 | AN-No. 1EZ61
Testing S-Parameters on Pulsed Radar Power Amplifier Modules
11-Apr-2013 | AN-No. 1MA126