8306 Results
This document provides information on how to perform manual testing based on current R&S TA-TRS QuickStep V4.05 platform in order to adapt to the new released EN 303 345.
14-Apr-2021
Use the R&S®ZVA vector network analyzer and R&S®BBA150 broadband amplifier for accurate and reproducible results in minimum test time.
27-Sep-2013
The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.
22-Aug-2014 | AN-No. 1MA231
This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.
27-Mar-2018 | AN-No. 1GP119
This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.
11-May-2016 | AN-No. 1MA154
This application note explains how to test your remote radio head with Rohde & Schwarz test and measurement equipment.
05-Aug-2013 | AN-No. 1GP78
ATSC receivers must fulfill the ATSC Receiver Performance Guidelines before they can be sold freely in the markets that have adopted the standard.
29-Sep-2016 | AN-No. 1GP111
The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band.
08-Mar-2016 | AN-No. 1MA273
The LTE C-V2X Scanner provides customers an opportunity to verify, test, and optimize ITS traffic systems (RF KPIs and decoded ITS message content).
21-Oct-2022 | AN-No. 8NT07
Machine learning use cases like network utilization rating and call stability score extract insights from network data analytics enabling network optimization
28-Feb-2024 | AN-No. 8NT10
The R&S®RTE is the best choice for analyzing small signals such as ECG signals with high signal fidelity.
17-Nov-2015
The R&S®SMW200A vector signal generator is ideal for high-precision RF and microwave tests requiring deembedding of the device under test (DUT).
11-Oct-2017
R&S®ZNB offers all the functionality needed to test digital high-speed signal structures on PCBs in one box.
20-Sep-2016
The R&S FSWP phase noise analyzer is the perfect tool for verifying clock sources to ensure accuracy of design requirements and proper operation.
30-Sep-2021
The R&S®FPS-K18 amplifier measurement option in combination with the R&S®FPS signal and spectrum analyzer and the R&S®SGT100A SGMA vector RF source enables high-speed amplifier characterization.
13-Jun-2016
The ground connection on the R&S®RT‑ZMxx modular multimode probes can be used to improve measurements on high-speed differential interfaces.
09-Nov-2017
Noise figure is an important parameter that describes the noise contribution of an electronic device. A classical approach to measure the noise figure is to use a noise source which delivers two different input noise powers by switching between a “hot” and a “cold” state and a noise receiver
23-Dec-2021 | AN-No. 1SL378
S-Parameters of a 50 to 75 Ohm impedance matching device using R&S ZVx VNA
06-May-2009 | AN-No. 1EZ59
Measuring Balanced Components with Vector Network Analyzer ZVB
20-Sep-2004 | AN-No. 1EZ53
The track functionality of the R&S®RTM3000 and the R&S®RTA4000 oscilloscopes is a great feature for displaying any varying PWM signal versus time in various applications.
25-Sep-2019
Measurement Setup for Phase Noise Test at Frequencies above 50 GHz with two external harmonic mixers in combination with a commercially available phase noise tester. Signal sources with frequencies up to 500 GHz can theoretically be measured with this setup.
05-Feb-2018 | AN-No. 1EF101
In order to clearly visualize and make repeatable measurements on signals with amplitudes of less than 1/100 of a division, and stabilize signals captured over very long periods, the R&S RTO oscilloscope’s powerful combination of measurement and math channel capabilities allows corrective offset adjustments on individual acquisitions more than one hundred times per second.
10-Sep-2015
This application note describes the basic frequency filter measurements that are often required during service repairs, during development and for training purposes.
27-Mar-2015 | AN-No. 1MA243
LTE beamforming can be accurately tested with one or more R&S®RTO digital oscilloscopes for a 1×2, 1×4 or even a 1×8 MIMO system.
16-Aug-2016
The R&S®Scope Rider is a handheld oscilloscope that features superior performance at the highest safety standards, combined with the debugging functionalities of a benchtop oscilloscope.
30-Dec-2015
For measurement settings below 10 mV/div, oscilloscopes typically reduce the measurement bandwidth in order to keep the trace noise as low as possible. The R&S®RTO is different: It offers the full bandwidth even for the most sensitive settings, and an A/D converter with more than 7 effective bits (ENOB) digitizes the signal.
13-Jul-2012
The application fields of oscilloscopes extend to EMI debugging because of their powerful and easy-to-use FFT analysis capabilities– and save time and money.
23-Sep-2019
A deep, segmented memory combined with dedicated trigger conditions solves this problem by permitting the acquisition of relevant sequences without long pauses.
01-Dec-2017