767 Results
Measurements on Frequency-Converting DUTs using Vector Network Analyzer ZVR
04-Aug-1998 | AN-No. 1EZ31
Interface Control Document for xDW streaming
25-Aug-2021 | AN-No. 1GP133
PESQ<sup>®</sup> Measurement for GSM with R&S<sup>®</sup>CMUgo
05-Jan-2012 | AN-No. 1MA119
To allow optimization early on in the R&D lab, Rohde & Schwarz provides a free tool to simplify conducted emissions debugging using oscilloscopes.
27-Sep-2021 | AN-No. 1SL372
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
Interface Control Document for xDW streaming
17-Mar-2022 | AN-No. 1GP134
Crucial for proper operation of mobile networks - Part 2 of the series on Cable and Antenna verification
Distance to fault or discontinuity measurements executed by a cable and antenna tester are crucial for proper operation of mobile networks
18-Jun-2024 | AN-No. 8NT16
P25 and FRMCS scanning
Mission-critical networks currently in migration from narrowband to broadband play a crucial role in enabling communication for various public safety agencies
12-Mar-2024 | AN-No. 8NT12
5G NR Reduced Capabilities (RedCap) network scanning
A deeper look into 5G RedCap technology and its verification with field measurements avoid potential coexistence issues.
23-Apr-2024 | AN-No. 8NT13
Thanks to their multichannel capability, oscilloscopes are ideal for multichannel applications such as the analysis of MIMO, multi-antenna radar and differential high-speed digital signals.
06-May-2020
MobiDemo - Program for Demonstration of Combination SMIQ + FSx
09-Jul-1999 | AN-No. 1MA11
Demonstration of BER Test with AMIQ controlled by WinIQSim
29-Sep-1998 | AN-No. 1MA16
AMIQ-K2 - Program for Transferring Various I/Q Formated Data to AMIQ
24-Nov-1999 | AN-No. 1MA10
The power consumption analysis tool was developed to make it easier for customers to analyze power consumption data collected with either the NGL, NGM or NGU power supplies from Rohde & Schwarz. It allows to easily capture power consumption data and analyze using basic measurements.
31-Jan-2022 | AN-No. 1SL380
Part 1 of the Cable and Antenna verification series – essential for Mobile Networks
Return loss and decoupling measurements on antenna systems executed by a cable and antenna tester are crucial for proper operation of mobile networks
23-Feb-2024 | AN-No. 8NT11
Exchanging Data Records between Different Test Receiver Models
18-Jan-2002 | AN-No. 1EE19
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
This document describes how the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.
24-Jul-2014 | AN-No. 7BM106
The R&S®SMA100B offers outputs for the analog input signal of the ADC as well as the clock input signal in one single instrument - both with outstanding signal purity.
11-Jan-2021 | AN-No. 1GP66
Primer
selection of appropriate RF power sensor
26-May-2021
ATSC receivers must fulfill the ATSC Receiver Performance Guidelines before they can be sold freely in the markets that have adopted the standard.
29-Sep-2016 | AN-No. 1GP111
Double frequency range for R&S Signal Generators
20-Apr-1998 | AN-No. 1GPAN03
This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
Measurement Setup for Phase Noise Test at Frequencies above 50 GHz with two external harmonic mixers in combination with a commercially available phase noise tester. Signal sources with frequencies up to 500 GHz can theoretically be measured with this setup.
05-Feb-2018 | AN-No. 1EF101
Level Error Calculation for Spectrum Analyzers
13-Jan-1998 | AN-No. 1EF36
Welcome to our short video tutorials on how to test radars using Rohde & Schwarz test equipment. Access to most information about radar is pretty restricted, as many radar applications are military or secretive industrial research.
03-Feb-2014 | AN-No. 1MA209
Automatic Emitter Creation from User Data for Mission Data File Testing
01-Jul-2021 | AN-No. 1GP131
This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.
23-Jan-2014 | AN-No. 1MA152
This document is divided in two parts and starts with an introduction in AC-DC conversion principles in general. It will present the most common circuits used for different power levels. The switching mode power supply (SMPS) converter will be the main focus as they are used everywhere in the electronics. Especially the flyback converter design in different flavors are highlighted. Nevertheless, all measurements are also applicable for other SMPS converter designs operating at higher power levels.In the second part of this document, most relevant testing methods and procedures of an AC-DC converter are highlighted. For each testing section, a fundamental part will be upfront discussed and it is followed by a presentation of a suitable measurement method. In this second part, the device under test (DUT) is considered as black box device and thus the structure is similar. Therefore, the testing parts consists of methods related to input tests, output tests and a combination of both like efficiency. Of course, some test performed at the output of the converter are also relevant for DC-DC converter, e.g. the validation of the output ripple.
14-Nov-2022 | AN-No. 1SL387
Welcome to this introductory video show about the R&S ZVA family of network analyzers.
13-Feb-2014 | AN-No. 1MA50