8383 Results
This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 oscilloscope.
24-Apr-2013 | AN-No. 1EF86
This application note describes how to configure the signal source analyzer R&S FSUP for highest dynamic range phase noise measurement in the microwave frequency range up to 50 GHz.
18-Feb-2009 | AN-No. 1EF68
This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.
14-May-2013 | AN-No. 7BM83
This white paper describes the interaction between intermodulation products generated by a device under test (DUT) and intermodulation products generated internally in a spectrum analyzer.
29-Nov-2012 | AN-No. 1MA219
The application note has a focus on the theoretical background of the PLL measurement method and illuminate its application in the R&S FSUP.
04-May-2010 | AN-No. 1EF72
Complex production workflows in several broadcast, post production or presentation environments not only need a solid storage architecture, but also intelligent project sharing since several teams require access to all data.
18-Nov-2014
Effective Test Procedures for Installing and Maintaining RF Transmitter Sites
31-Jan-2003 | AN-No. 1EF50
A single instrument, the R&S®ETL TV analyzer, performs all required ATSC transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commis-sioning and preventive maintenance.
13-May-2013 | AN-No. 7BM102
The Crest Factor in DVB-T (OFDM) Transmitter Systems and its Influence on the Dimensioning of Power Components
22-Jan-2011 | AN-No. 7TS02
Remote control over a public mobile phone network with SMS or via a wireless IP connection.
22-Apr-2013
This application note provides information about spectral measurements with noise correction. The basic requirements and the limiting factors of a spectrum analyzer are explained.
25-Oct-2012 | AN-No. 1EF76
This application note describes how the transmitter landscape of a DVB-T2 single-frequency network (SFN) can be simulated in multiple input single output (MISO) mode in order to test the compatibility and performance of receiver modules.
03-Feb-2014 | AN-No. 7BM80
In this application note, a UHD 4K end-to-end solution utilizing products from Rohde & Schwarz is described in detail from the point at which 4K content is captured until its delivery to households via a DVB-T2 SFN network.
29-Aug-2014 | AN-No. 7BM90
The GPIB-Bus Device Finder GPIB FIND helps you identify the devices connected to a GPIB (IEC or IEEE) bus.
28-Oct-2009 | AN-No. 1MA17
Radiomonitoring with Test Receivers ESN/ESVN
18-Jan-2002 | AN-No. 1EE13
ZONE PLATE SIGNALS 525 Lines Standard M/NTSC
20-Jul-2001 | AN-No. 7BM23
This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology.
02-Feb-2012 | AN-No. 1MA139
This application note presents information on how to configure and use the R&S®ZNB vector network analyzer to successfully make accurate and quick measurement of basic RF amplifier parameters.
11-Jul-2013 | AN-No. 1EZ65
What is a decibel and how should we use it in our calculations? This Application Note is intended as a refresher on the subject of decibels.
21-Apr-2015 | AN-No. 1MA98
This application note explains the fundamentals of using S-parameters and discusses some common applications in which S-parameter correction is useful.
27-Jul-2012 | AN-No. 1GP70
The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers.
23-May-2012 | AN-No. 1MA168
The digital Video Standard according to ITU-R BT. 601/656
20-Jul-2001 | AN-No. 7BM19
Bandwidth of video signals from generators with purely digital signal generation
20-Jul-2001 | AN-No. 7BM21
ZONE PLATE SIGNALS 625 Lines Standard BG/PAL
20-Jul-2001 | AN-No. 7BM24
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy adapter assemblies supporting USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL407
Incorrect colours in the RGB display of the 'digital' colour bars
20-Jul-2001 | AN-No. 7BM18
This application note describes a future-proof API to enable and streamline customized and automated workflows with Rohde & Schwarz DVS software applications.
18-Nov-2014
This Application Note describes the operating principle of DME (Distance Measurement Equipment) that is used for distance measurement in aviation. It also describes various test scenarios for the maintenance of a DME transponder.
26-Feb-2009 | AN-No. 1GP74