R&S®ZNBT Vector network analyzer

True multiport VNA

R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT vector network analyzer, front view R&S®ZNBT vector network analyzer, front high R&S®ZNBT vector network analyzer, side view R&S®ZNBT vector network analyzer, back view R&S®ZNBT vector network analyzer, back view R&S®ZNBT vector network analyzer, application image

Key facts

  • Frequency range: 9 kHz to 8.5 GHz or 100 kHz to 20/26.5/40 GHz
  • Up to 24 ports with fully phase coherent receivers
  • Dynamic range of up to 140 dB
  • Short sweep times of 2.5 ms (R&S®ZNBT8) for a sweep across 201 points
  • SCPI recorder

Network analysis with up to 24 test ports

A true multiport vector network analyzer

The R&S®ZNBT is a multiport vector network analyzer with up to 24 fully integrated test ports. The instrument can simultaneously test multiple DUTs or measure one DUT with up to 24 ports. The fully integrated test ports make the R&S®ZNBT a true multiport vector network analyzer, which includes a wide dynamic range, high output power levels and fast measurements. Frequency ranges up to 40 GHz are available.

Features & benefits

True multiport VNA

Platform for challenging multiport measurements

The R&S®ZNBT features one reflectometer per test port. The design eliminates the loss typically encountered in switch matrix based multiport systems. As a result, the R&S®ZNBT delivers a wide dynamic range, high output power, low trace noise, and excellent raw directivity and load match.

Open Lightbox

When speed counts

Short test times and various control interfaces

The instrument’s multiport architecture enables simultaneous measurements on all DUT ports. Data from all ports is captured synchronously and processed in parallel, significantly reducing sweep time compared to switch matrix based multiport systems. Digital interfaces help boost the speed of automatic test cycles to synchronize external components in a test setup. The handler I/O interface can be used to control an external parts handler.

Open Lightbox

Versatile options and firmware features

Complex analysis of active and passive components

Enhanced performance modules with ever smaller dimensions require complex testing. The R&S®ZNBT has a wide variety options and features:

  • More than 100 traces and channels for characterizing complex components
  • Wide range of embedding/deembedding options
  • Frequency-converting measurements on amplifiers and mixers
  • Time domain analysis with gating function and display of eye diagrams

Open Lightbox

Multiport calibration

Various calibration methods and devices

The R&S®ZNBT offers calibration methods for every application, including TOSM, TSM, TRL/LRL, UOSM and more. Together with a huge variety of calibration accessories ranging from manual calibration kits to automatic calibration units with up to 24 ports, all user calibration needs can be met.

R&S®ZN-Z154 automatic calibration unit 24 ports
Open Lightbox

R&S®ZN-Z154 automatic calibration unit 24 ports

Available models

Available models
Models
Ports
Frequency
Connectors

R&S®ZNBT8

Order number 1318.7006.24

Ports
4 to 24
Frequency
9 kHz to 8.5 GHz
Connectors
N (f)

R&S®ZNBT20

Order number 1332.9002.64

Ports
8 to 24
Frequency
100 kHz to 20 GHz
Connectors
3.5 mm (m)

R&S®ZNBT26

Order number 1332.9002.34

Ports
8 to 24
Frequency
100 kHz to 26.5 GHz
Connectors
2.92 mm (m)

R&S®ZNBT40

Order number 1332.9002.44

Ports
8 to 24
Frequency
100 kHz to 40 GHz
Connectors
2.92 mm (m)

Available options

Receiver step attenuators
Product
Description
R&S®ZNBT8-B361

Order number 1319.4317.02

Description

Receiver step attenuators for ports 1 to 4 for the R&S®ZNBT8

R&S®ZNBT8-B362

Order number 1319.4323.02

Description

Receiver step attenuators for ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B363

Order number 1319.4330.02

Description

Receiver step attenuators for ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B364

Order number 1319.4346.02

Description

Receiver step attenuators for ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B365

Order number 1319.4352.02

Description

Receiver step attenuators for ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B366

Order number 1319.4369.02

Description

Receiver step attenuators for ports 21 to 24 for the R&S®ZNBT8

Extended power range
Product
Description
R&S®ZNBT8-B21

Order number 1319.4252.02

Description

Extended power range for ports 1 to 4 for the R&S®ZNBT8

R&S®ZNBT8-B22

Order number 1319.4269.02

Description

Extended power range for ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B23

Order number 1319.4275.02

Description

Extended power range for ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B24

Order number 1319.4281.02

Description

Extended power range for ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B25

Order number 1319.4298.02

Description

Extended power range for ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B26

Order number 1319.4300.02

Description

Extended power range for ports 21 to 24 for the R&S®ZNBT8

R&S®ZNBT20-B21

Order number 1332.9348.02

Description

Extended power range for ports 1 to 4 for the R&S®ZNBT20

R&S®ZNBT20-B22

Order number 1332.9354.02

Description

Extended power range for ports 5 to 8 for the R&S®ZNBT20

R&S®ZNBT20-B23

Order number 1332.9360.02

Description

Extended power range for ports 9 to 12 for the R&S®ZNBT20

R&S®ZNBT20-B24

Order number 1332.9377.02

Description

Extended power range for ports 13 to 16 for the R&S®ZNBT20

R&S®ZNBT20-B25

Order number 1332.9383.02

Description

Extended power range for ports 17 to 20 for the R&S®ZNBT20

R&S®ZNBT20-B26

Order number 1332.9390.02

Description

Extended power range for ports 21 to 24 for the R&S®ZNBT20

R&S®ZNBT26-B21

Order number 1332.9348.34

Description

Extended power range for ports 1 to 4 for the R&S®ZNBT26

R&S®ZNBT26-B22

Order number 1332.9354.34

Description

Extended power range for ports 5 to 8 for the R&S®ZNBT26

R&S®ZNBT26-B23

Order number 1332.9360.34

Description

Extended power range for ports 9 to 12 for the R&S®ZNBT26

R&S®ZNBT26-B24

Order number 1332.9377.34

Description

Extended power range for ports 13 to 16 for the R&S®ZNBT26

R&S®ZNBT26-B25

Order number 1332.9383.34

Description

Extended power range for ports 17 to 20 for the R&S®ZNBT26

R&S®ZNBT26-B26

Order number 1332.9390.34

Description

Extended power range for ports 21 to 24 for the R&S®ZNBT26

R&S®ZNBT40-B21

Order number 1332.9348.44

Description

Extended power range for ports 1 to 4 for the R&S®ZNBT40

R&S®ZNBT40-B22

Order number 1332.9354.44

Description

Extended power range for ports 5 to 8 for the R&S®ZNBT40

R&S®ZNBT40-B23

Order number 1332.9360.44

Description

Extended power range for ports 9 to 12 for the R&S®ZNBT40

R&S®ZNBT40-B24

Order number 1332.9377.44

Description

Extended power range for ports 13 to 16 for the R&S®ZNBT40

R&S®ZNBT40-B25

Order number 1332.9383.44

Description

Extended power range for ports 17 to 20 for the R&S®ZNBT40

R&S®ZNBT40-B26

Order number 1332.9390.44

Description

Extended power range for ports 21 to 24 for the R&S®ZNBT40

Extended dynamic range
Product
Description
R&S®ZNBT8-B504

Order number 1332.8335.02

Description

Extended dynamic range for ports 1 to 4 for the R&S®ZNBT8

R&S®ZNBT8-B508

Order number 1332.8341.02

Description

Extended dynamic range for ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B512

Order number 1332.8358.02

Description

Extended dynamic range for ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B516

Order number 1332.8364.02

Description

Extended dynamic range for ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B520

Order number 1332.8370.02

Description

Extended dynamic range for ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B524

Order number 1332.8387.02

Description

Extended dynamic range for ports 21 to 24 for the R&S®ZNBT8

Additional test ports
Product
Description
R&S®ZNBT8-B108

Order number 1319.4200.02

Description

Additional ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B112

Order number 1319.4217.02

Description

Additional ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B116

Order number 1319.4223.02

Description

Additional ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B120

Order number 1319.4230.02

Description

Additional ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B124

Order number 1319.4246.02

Description

Additional ports 21 to 24 for the R&S®ZNBT8

R&S®ZNBT20-B112

Order number 1338.2116.02

Description

Additional ports 9 to 12 for the R&S®ZNBT20

R&S®ZNBT20-B116

Order number 1338.2122.02

Description

Additional ports 13 to 16 for the R&S®ZNBT20

R&S®ZNBT20-B120

Order number 1338.2139.02

Description

Additional ports 17 to 20 for the R&S®ZNBT20

R&S®ZNBT20-B124

Order number 1338.2145.02

Description

Additional ports 21 to 24 for the R&S®ZNBT20

R&S®ZNBT26-B112

Order number 1332.9454.34

Description

Additional ports 9 to 12 for the R&S®ZNBT26

R&S®ZNBT26-B116

Order number 1332.9460.34

Description

Additional ports 13 to 16 for the R&S®ZNBT26

R&S®ZNBT26-B120

Order number 1332.9302.34

Description

Additional ports 17 to 20 for the R&S®ZNBT26

R&S®ZNBT26-B124

Order number 1332.9319.34

Description

Additional ports 21 to 24 for the R&S®ZNBT26

R&S®ZNBT40-B112

Order number 1332.9454.44

Description

Additional ports 9 to 12 for the R&S®ZNBT40

R&S®ZNBT40-B116

Order number 1332.9460.44

Description

Additional ports 13 to 16 for the R&S®ZNBT40

R&S®ZNBT40-B120

Order number 1332.9302.44

Description

Additional ports 17 to 20 for the R&S®ZNBT40

R&S®ZNBT40-B124

Order number 1332.9319.44

Description

Additional ports 21 to 24 for the R&S®ZNBT40

Other
Product
Description
R&S®ZNBT-B10

Order number 1332.9483.02

Description

GPIB interface

R&S®ZNBT-B12

Order number 1332.9490.02

Description

Device control

R&S®ZN-B121

Order number 1323.9290.00

Description

Direct control cable

R&S®ZNBT-B19

Order number 1332.9283.10

Description

Additional removable hard disk for R&S®ZNBT with LPW10

Windows Embedded Standard 7 (32 bit)

R&S®ZNBT-B19

Order number 1332.9283.11

Description

Additional removable hard disk for R&S®ZNBT with LPW11

Windows Embedded Standard 7 (64 bit)

R&S®ZNBT-B19

Order number 1332.9283.12

Description

Additional removable SSD for R&S®ZNBT with LPW11

Windows 10 IoT Enterprise 2016 LTSB (64 bit)

R&S®ZNBT-B19

Order number 1332.9283.13

Description

Additional removable SSD for R&S®ZNBT with LPW11

Windows 10 IoT Enterprise 2021 LTSC (64 bit)

R&S®ZNBT-B4

Order number 1332.9477.02

Description

Precision frequency reference

R&S®ZNBT-B81

Order number 1332.9502.02

Description

DC inputs

R&S®ZNBT-USY

Order number 1328.8857.02

Description

Synthesizer upgrade for the R&S®ZNBT

 

R&S®ZNBT-U20

Order number 1338.9262.02

Description

Windows upgrade for R&S®ZNBT with LPW10, incl. 512 GB SSD and LPW11

Windows 10 IoT Enterprise 2021 LTSC (64 bit)

R&S®ZNBT-U21

Order number 1338.9279.02

Description

Windows upgrade for R&S®ZNBT with LPW11, incl. 512 GB SSD

Windows 10 IoT Enterprise 2021 LTSC (64 bit)

R&S®ZZA-KN5

Order number 1175.3040.00

Description

19" Rack Adapter

R&S®ZN-Z15

Order number 1325.5905.02

Description

External RFFE GPIO Interface (MIPI)
Includes one R&S®ZN-Z25 interface cable adapters

R&S®ZN-Z15

Order number 1325.5905.03

Description

External RFFE GPIO Interface (MIPI)
Including voltage and current measurements and includes one R&S®ZN-Z25 interface cable adapters

R&S®ZNBT-Z14

Order number 1326.6640.05

Description

External handler I/O interface

R&S®ZN-Z25

Order number 1334.3424.02

Description

Additional Interface Cable for R&S®ZN-Z15 RFFE GPIO Interface

(including adapters)

Software options
Product
Description

Order number 1318.8425.02

Description

Time domain analysis (TDR)

R&S®ZNBT-K20

Order number 1319.4400.02

Description

Extended time domain analysis with eye diagram

R&S®ZNBT-K3

Order number 1350.5063.02

Description

Distance-to-fault (DTF)

Order number 1318.8431.02

Description

Frequency conversion

R&S®ZNBT-K14

Order number 1318.8448.02

Description

Intermodulation measurements
 

requires R&S®ZNBT-K4

R&S®ZNBT-K17

Order number 1318.8454.02

Description

10 MHz receiver bandwidth

R&S®ZNBT-K19

Order number 1319.4000.02

Description

1 mHz frequency resolution

R&S®ZNBT-K27

Order number 1328.8840.02

Description

Pulsed source

Order number 1332.8406.02

Description

Noise figure measurement

R&S®ZNBT-K100

Order number 1338.9340.02

Description

SNP assistant

R&S®ZNBT-K210

Order number 1328.8634.02

Description

EaZy deembedding (EZD) based on IEEE 370

for R&S®ZNBT;

R&S®ZNBT-K220

Order number 1328.8640.02

Description

In-Situ De-embedding (ISD) that covers IEEE 370

for R&S®ZNBT

R&S®ZNBT-K230

Order number 1328.8657.02

Description

Smart Fixture De-embedding (SFD)

for R&S®ZNBT

R&S®ZNBT-K231

Order number 1328.8663.02

Description

Delta-L 4.0 PCB characterization

for R&S®ZNBT

R&S®ZNBT-K980

Order number 1338.8989.02

Description

HUMS software option

Health and utilization monitoring service for R&S®ZNBT

R&S®ZN-ZTW torque wrenches
Product
Description
R&S®ZN-ZTW

Order number 1328.8534.10

Description

Torque Wrench, 0.45 Nm

for 1.0 mm connectors, 6 mm width across flats

R&S®ZN-ZTW

Order number 1328.8534.11

Description

Torque Wrench, 0.23 Nm coupling torque

for 1.0 mm connectors with 6 mm width across flats

R&S®ZN-ZTW

Order number 1328.8534.12

Description

Torque Wrench, 0.34 Nm

for 1.0 mm connectors, 6 mm width across flats

R&S®ZN-ZTW

Order number 1328.8534.19

Description

Torque Wrench, 0.9 Nm

R&S®ZN-ZTW

Order number 1328.8534.35

Description

Torque Wrench

Torque Wrench for 3.5/2.92/2.4/1.85 mm connectors with 8 mm width across flats, 0.9 Nm coupling torque 

R&S®ZN-ZTW

Order number 1328.8534.71

Description

Torque Wrench, 1.5 Nm

for type N connectors, 20 mm width across flats

Attenuators and limiters
Product
Description
R&S®DNF

Order number 0272.4010.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 3 dB, 2 W

R&S®DNF

Order number 0272.4110.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 6 dB, 2 W

R&S®DNF

Order number 0272.4210.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 10 dB, 1 W

R&S®RBU50

Order number 1073.8695.03

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®DNF

Order number 0272.4310.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 20 dB, 1 W

R&S®RBU50

Order number 1073.8695.06

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.20

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.10

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.30

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.03

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.06

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.10

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.20

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.30

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RDL50

Order number 1035.1700.52

Description

High-Power Attenuator, 50W

0 Hz to 6 GHz, 20 dB

R&S®ZN-B13

Order number 1303.7840.02

Description

50 Ohm broadband limiter

Terminations and matching pads
Product
Description
R&S®RNB

Order number 0272.4910.50

Description

Termination, 50 Ω

1 W, DC to 4 GHz, N (m)

R&S®RNA

Order number 0272.4510.50

Description

Precision Termination, 75 Ω

1 W, DC to 3 GHz, N (m)

R&S®RAU

Order number 0200.0019.55

Description

UHF Termination , 50 Ω

0 Hz to 2 GHz, 100 W, N (f)

R&S®RAD

Order number 0289.8966.00

Description

Feedthrough Termination, 50 Ω

0.5 W, DC to 1 GHz, BNC (m/f)

R&S®RAD50

Order number 0844.9352.02

Description

Feedthrough Termination, 50 Ω

2 W, DC to 500 MHz, BNC (m/f)

R&S®RAM

Order number 0358.5414.02

Description

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

R&S®RAZ

Order number 0358.5714.02

Description

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®RAZ

Order number 0358.5714.03

Description

Matching Pad 50/75 Ω, series resistor 25 Ω

0 Hz to 3.3 GHz

Bridges, power splitters and junction boxes
Product
Description
R&S®RVZ

Order number 0800.6612.52

Description

Power Splitter, 2x 50 Ω

0 Hz to 2.7 GHz

R&S®ZV-Z1227

Order number 1307.0886.02

Description

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZV-Z1228

Order number 3626.4937.02

Description

Pulsar 4-way power divider, 5 GHz to 27 GHz

5 GHz to 27 GHz

Adapters
Product
Description
R&S®ZV-Z1218

Order number 1314.5380.00

Description

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1118

Order number 1314.5373.00

Description

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®WCA70

Order number 1324.5001.02

Description

Waveguide Coax Adapter, WR15 to 1.85 mm (male)
50 GHz to 75 GHz

R&S®WCA75

Order number 3592.6727.02

Description

Waveguide coax adapter, WR15 to 1 mm (m)

R&S®WCA75

Order number 3592.6733.02

Description

Waveguide Coax Adapter, WR15 to 1mm(f)

R&S®WCA75

Order number 3626.1044.02

Description

Waveguide Coax Adapter, WR15 to 1 mm (f)

50 GHz to 75 GHz

R&S®WCA75

Order number 3626.1044.03

Description

Waveguide Coax Adapter, WR15 to 1 mm (m)

50 GHz to 75 GHz

R&S®WCA90

Order number 3626.1050.02

Description

Waveguide Coax Adapter, WR12 to 1 mm (f)

60 GHz to 90 GHz

R&S®WCA90

Order number 3626.1050.03

Description

Waveguide Coax Adapter, WR12 to 1 mm (m)

60 GHz to 90 GHz

R&S®WCA110

Order number 3626.1067.02

Description

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

Order number 3626.1067.03

Description

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

Related videos

R&S®ZNB: solid performance for general purpose applications

A typical measurement task is presented, and how it can be easily accomplished with R&S®ZNB Vector Network Analyzers. The R&S®ZNB vector network analyzer offers solid RF performance for everyday needs.

07-May-2021

Integrated Deembedding Software

For maximum accuracy in characterizing various components with fixtures, the R&S®ZNB has several industry standard de-embedding tools integrated in the R&S®ZNB Firmware

07-May-2021

Multi-Touch operation concept

The multi-touch capability of the R&S®ZNB ensures a smooth and easy operation of the instrument.

07-May-2021

Unique DUT centric operation

The R&S®ZNB offers a unique DUT-centric operation concept. This puts the DUT with its characteristics in the middle and helps you in setting up the measurement.

07-May-2021

Diverse measurement options

The R&S®ZNB vector network analyzer features a diverse number of measurement options.

07-May-2021

Solid performance for general purpose applications

The R&S®ZNB vector network analyzer offers solid RF performance for your everyday needs.

07-May-2021

Eye diagram analysis with the R&S®ZNB: how to set up the measurements

The R&S®ZNB-K20 option enables to display eye diagrams on the R&S®ZNB and R&S®ZNBT vector network analyzers from Rohde & Schwarz.

21-May-2019

Eye diagram analysis with the R&S®ZNB: introduction

The R&S®ZNB and R&S®ZNBT vector network analyzers from Rohde & Schwarz now support eye diagrams.

21-May-2019

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.