Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1118 Results
All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies. In the case of parallel and serial connections it is usually desired to switch all channels simultaneously on and off for protecting the supplied circuitry and for avoiding overcurrent on other power supply channels.This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.
15-Jun-2020 | AN-No. 1GP126
The LCR meters R&S®LCX100 and R&S®LCX200 precisely measure the complex impedance and the resulting components values over a wide frequency range. Dynamic impedance measurements allow to perform these measurements while sweeping the test signal frequency or other parameters like test signal level and DC bias. This application note provides a PC-based software tool for comfortably setting the sweeps and displaying the results in numerous charts.
14-Mar-2022 | AN-No. 1GP132
This application note is about creating your own battery model for the R&S®NGM200 or R&S®NGU201, beyond the standard models provided within the battery simulation option NGM-K106. The main purpose is to gradually discharge a battery or a rechargeable battery using the internal QuickArb function. The discharge of the battery can then be recorded using the fast data logging functionality FastLog. The recorded data are stored in a .CSV file. This file can then be adapted to be used as a battery model in the battery simulation mode of the R&S®NGM200. For this purpose, Rohde & Schwarz provides a tool for developers to make their work easier. This tool calculates all the data required for a battery model.Note: More advanced tools are available with application notes 1GP130 (Battery Cycle Tool) and 1GP136 (Battery Simulation).
26-Jul-2023 | AN-No. 1GP128
This application note provides an application program and instructions for performing speech quality tests and delay measurements in a live network, using the R&S®UPV audio analyzer.
14-Dec-2017 | AN-No. 1GA68
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
Acoustic properties like reverberation time and early reflections are important for test rooms as well as for speech intelligibility and music performance in assembly rooms and concert halls. This application note explains the basics behind these properties and offers an application program for their measurement.
10-Jul-2012 | AN-No. 1GA61
The combination of R&S® CMU200 and R&S® UPV is in use for various tests of mobile phone speech functionality, such as acoustic tests according to 3GPP 26.132 or speech quality tests according to ITU-T P.862 (PESQ®) or ITU-T P.863 (POLQA®). This application note explains how to replace the R&S® CMU200 in these tasks with R&S® CMW500.
25-Jul-2014 | AN-No. 1GA65
This application note provides an application program for level alignment, test automation and reporting with PESQ, POLQA and delay measurements on the Audio Analyzer R&S®UPV or R&S®UPV66.
08-May-2013 | AN-No. 1GA62
The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.
05-Sep-2014 | AN-No. 1GA66
This paper describes the measurement of additive/residual phase noise of power amplifiers or multipliers for example for automotive RADAR sensors at 80 GHz using the interferometric measurement approach in combination with a phase noise and VCO tester R&S FSWP. The setup provides a way to characterize the additive/residual phase noise of amplifiers down to -150 dBc/Hz at 100 kHz offset even in the microwave range at 80 GHz.
11-Sep-2024 | AN-No. 1EF117
A measurement campaign quantifying the impact of intermodulation in 5G TDD networks
Critical infrastructure: With the deployment of TDD networks, the mobile network community recognizes the critical importance of cell synchronization and the use of uniform TDD patterns across different networks for the proper operation of mobile radio networks. Variety of scenarios: Possible scenarios include cross-border situations, interactions between private campus networks and public mobile networks, and accidental synchronization chain breaks or misconfigurations within the mobile network.Measurement techniques: To quantify the effects of non-synchronized cells and using different TDD pattern in neighboring networks, R&S, in collaboration with TU Dresden and Advancing Individual Networks GmbH (AIN), conducted a measurement campaign using movable networks with full control over all network parameters. This campaign measured the effects on uplink and downlink throughput, mapping these to RSSI/RSRP values received at the interfered site.Customer benefits: The available quantification is valuable for predicting and assessing potential interference scenarios before setting up and operating a new cell site.
11-Sep-2024 | AN-No. 8NT18
The R&S®MobileView app lets users operate Rohde & Schwarz instruments remotely and eliminates the need for physical interactions with the instruments.
04-Sep-2024
The MFIA impedance analyzer – a multipurpose instrument for R&D and quality control – can be used to measure the ESR and ESL of DC-link capacitors over a wide frequency range.
04-Sep-2024
Best practices for mobile network testing for business-critical applications
Business-critical infrastructure: Industrial applications require extremely high reliability and availability, as any downtime can result in significant financial losses. Fundamental requirements: Industrial applications often require low latency and even more important a sustainable latency to ensure real-time communication and control. Measurement Techniques: As soon as the radio access network is used, innovative testing methods are needed beforehand to proactively test the network capability and to identify any potential issues. We propose a standard test procedure for the characterization of a network regarding industrial use-cases that covers a representative set of different, common types of network traffic.
13-Aug-2024 | AN-No. 8NT17
With a Rohde & Schwarz oscilloscope
13-Aug-2024
LTE is becoming the predominant wireless technology. Among several new features of this standard, the multiple input multiple output (MIMO) technology offers various advantages.It improves the throughput, extends the reach, reduces interference and improves the signal to interference plus noise ratio (SINR) with beamforming. LTE supports various modes in order to optimize the transmission settings.An LTE MIMO base station consists of a baseband unit, a remote radio head (RRH) and an array of up to eight antennas. The RRH upconverts the digital signals of the baseband unit into analog signals for each antenna.
08-Aug-2024
Automotive radars are essential to safety systems such as collision avoidance and adaptive cruise control. The radars are a pillar of ADAS/AD systems and an important part of sensor fusion. The effective isotropic radiated power (EIRP) of automotive radar sensors is the total power emitted from radar antennas and a comprehensive measure of signal strength and coverage capability (essential to assessing automotive radar sensor performance). The AREG800A automotive radar echo generator makes for easy EIRP measurements when validating automotive radar sensors.
06-Aug-2024
Rogue cells pose a significant threat to cellular networks. They need to be addressed as quickly as possible to avoid damage to network integrity, especially for critical infrastructure. R&S®NESTOR cellular network analysis (CNA) software lets users efficiently detect and locate harmful cells in the network environment through base station analysis (BSA) in order to protect sensitive areas.
02-Aug-2024
Verifying 5G transmitted signals in the field with the R&S®Spectrum Rider FPH handheld spectrum analyzer
30-Jul-2024
With the wideband extension R&S®ESW-B1000, the R&S®ESW EMI test receiver allows never seen testing speed with up to 970 MHz of FFT bandwidth. External applications can now take advantage of the wide bandwidth. ESW firmware 3.20 adds a new method for exporting trace data from the instrument, regardless if the instrument is equipped with the wideband extension or not. SCPI commands allow live trace export of multiple traces simultaneously. This application note describes the use and applications of SCPI commands to request trace data of up to 4 traces simultaneously from the R&S®ESW receiver, even allowing CISPR detectors. The commands enable trace export while the instrument measures continuously and therefore theoretically enable infinite measurements.
25-Jul-2024 | AN-No. 1EE27
Steger Susanne Spectrum Rider, FPH, FPH handheld spectrum analyzer, satellite ground station Satellite ground station testing up to 44 GHz with the R&S®Spectrum Rider FPH handheld spectrum analyzer Satellite ground station testing up to 44 GHz with the R&S®Spectrum Rider FPH handheld spectrum analyzer Steger Susanne Spectrum Rider, FPH, FPH handheld spectrum analyzer, satellite ground station Satellite
24-Jul-2024
Smart factories rely heavily on wireless communications technology to automate production processes and increase productivity. Any source of RF interference can disrupt the production process or delay the output.
23-Jul-2024
Analyzing high speed datacom interfaces is an important task and ensures signal integrity. One major challenge of this analysis is the connection between the physical interface and the oscilloscope, as most of the datacom interfaces do not provide test connections suitable for RF. A test fixture is required as a bridge between the high speed datacom IF and the RF connector of the oscilloscope, but this will affect the signal integrity measurement. The R&S®RTP and R&S®RTO oscilloscopes with the advanced jitter option can analyze and separate jitter contributions. Additionally, the option can evaluate the impact of test fixtures and traces inherently and give the user a good understanding of the impact of their test setup.
15-Jul-2024
Selecting You Next Oscilloscope:
If you are selecting your next oscilloscope and want more insight on how to understand ENOB values measured and published by oscilloscope manufacturers, this document is for you. The effective number of bits (ENOB) is a way of quantifying the quality of analog to digital conversion. A higher ENOB means that voltage levels recorded in analog to digital conversion are more accurate. Understanding oscilloscope vendor-supplied ENOB values can be complex. This document focuses on interpretation of measured ENOB results made on oscilloscopes rather than the math behind ENOB calculations.
21-Jun-2024 | AN-No. 1TD12
Crucial for proper operation of mobile networks - Part 2 of the series on Cable and Antenna verification
Key points: Critical Infrastructure: Learn why the antenna system, as part of mobile base stations, is irreplaceable and demands meticulous attention due to its impact on network quality and availability.Vulnerability to Environmental Factors: Understand the challenges posed by weather conditions and environmental stresses on antenna systems, highlighting the importance of robust design and maintenance.Fundamental Properties: Delve into the core concepts of antenna systems, gaining insights into fundamental properties of antennas and the antenna cables.Measurement Techniques: Explore discontinuity or distance to fault measurements to identify reflections of forward RF energy due to impedance changes (connector, compression or kink of a cable, etc.).
18-Jun-2024 | AN-No. 8NT16
Automated test equipment (ATE) is a cornerstone in production facilities. Devices under test (DUT) have to be measured according to various limits to ensure safe and reliable operation for the user. A production facility must ensure that these tests are performed properly and cover all the necessary test cases. However, the tests must also be executed with sufficient speed. Oscilloscopes (e.g. the MXO series from Rohde & Schwarz) are often a typical part of ATE and can improve the workflow with a dedicated “waiting for trigger” signal.
30-May-2024
Automotive radar sensors concealed in bumpers must transmit in the correct frequency domain. To effectively hide sensors, radar-transparent areas usually have the exact same paint as the rest of the vehicle. When selecting paint and coatings for bumpers, you need to know their material properties. In the past, either quasi-optical or waveguide based setups with vector network analyzers (VNA) were used. The following application card describes a simplified material characterization method in the automotive radar frequency domain (76 GHz to 81 GHz) with the R&S®QAR50 automotive radome tester.
22-May-2024
End-to-end conformance testing of 4G and 5G next generation eCall (NG eCall) modules under controlled network conditions
13-May-2024