Isolated probing system For oscilloscopes

The next ground breaking probe solution

Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system For oscilloscopes
Open Lightbox
Isolated probing system has a formable tip cable. Isolated probe system for oscilloscope Different probe tips supported including MMCX, Square, Wide square pin and isolated browser. Isolated probing system For oscilloscopes, Application Image Back of the receiver for SMA, power and USB control. Isolated probing system For oscilloscopes Isolated probing system For oscilloscopes Isolated probing system For oscilloscopes Isolated probing system For oscilloscopes

Key facts

  • 100, 200, 350, 500 MHz and 1 GHz bandwidth, upgradeable
  • > 90 dB CMRR at 1 GHz
  • ± 3000 V differential input range and offset
  • ± 60 kV common mode range
  • Dual connectivity with a Rohde & Schwarz probe interface and SMA connector

NEXT GENERATION GROUND BREAKING SOLUTION

With optical isolation

The R&S®RT-ZISO isolated probing system can tackle the challenge of measuring in high voltage and fast switching environments. The power-over-fiber-optic architecture galvanically isolates the device under test (DUT) for the highest possible common mode rejection ratio (CMRR) at up to 1 GHz. The complete systems compensate thermal drifts and gain errors for the highest possible and uncompromising signal fidelity .

Features & benefits

For fast common mode probing challenges

The R&S;®RT-ZISO isolated probing system suppresses interference from fast common mode signals with optical isolation for a CMRR of > 90 dB at 1 GHz. This helps with high-side gate measurements on complementary switching circuits especially wide bandgap devices.

  • 1 GHz > 90 dB
  • 500 MHz > 100 dB
  • 100 MHz > 115 dB
  • 1 MHz > 145 dB

Open Lightbox

Isolation limits CM noise loop formation in the system.

Probe tips matter

The R&S®RT-ZISO comes in a variety of probe tips and the MMCX probe tip is the most important one for CMRR performance. Different connector types such as square pins and wide square pins are also supported with different attenuation ratios. The probe tip cables are long and formable for allow easy access to aa probe point with minimal mechanical stress.

Open Lightbox

Formable probe tips with different connectors and browser probes.

Hassle-free setup with Rohde & Schwarz oscilloscopes

Using the R&S®RT-ZISO with the Rohde & Schwarz probe interface on our oscilloscopes creates a seamless experience. The instrument detects and sets up the probe tip information. Offset and range control can be easily configured on the instrument. Users can also easily use all Rohde & Schwarz oscilloscope functions and features such as fast acquisition and responsive FFT in their measurements.

Open Lightbox

Seamless connection for control with a Rohde & Schwarz oscilloscope

Investment protection

R&S;®RT-ZISO isolated probe systems can connect to any oscilloscope with a BNC or SMA interface. Investment in instruments can be based on performance needs. The R&S®RT-ZISO lets bandwidth be upgraded based on future needs. 

Open Lightbox

Future bandwidth upgrade possible with the R&S®RT-ZISO

Safely measure, securely operate

The R&S®RT-ZISO complies with CAT III 1000V safety ratings. The material and mechanical structures comply with IEC/EN 61010-31 covering hand-held probe assemblies for electrical measurements. 

  • CAT III 1000V safety rating
  • Safe attach on probe tips
  • Class 1 laser safety

Open Lightbox

Safe attach lets you safely swap out probe tips

Available models

Available models
Models
Bandwidth
Rise time
Cable length
Probe tips included

R&S®RT-ZISO Base unit to be configured with bandwidth and cable length options

Order number 1804.5000.02

Click on order no. to copy
Order number 1804.5000.02 is now copied to your clipboard.
Bandwidth
100 ~ 1000 MHz
Rise time
< 4 ~ 0.45 ns
Cable length
3 or 10 meters
Probe tips included
User config

R&S®RT-ZISO01

Order number 1804.5000P11

Click on order no. to copy
Order number 1804.5000P11 is now copied to your clipboard.
Bandwidth
100 MHz
Rise time
< 4 ns
Cable length
3 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO02

Order number 1804.5000P12

Click on order no. to copy
Order number 1804.5000P12 is now copied to your clipboard.
Bandwidth
200 MHz
Rise time
< 2 ns
Cable length
3 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO03

Order number 1804.5000P13

Click on order no. to copy
Order number 1804.5000P13 is now copied to your clipboard.
Bandwidth
350 MHz
Rise time
< 1.14 ns
Cable length
3 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO05

Order number 1804.5000P14

Click on order no. to copy
Order number 1804.5000P14 is now copied to your clipboard.
Bandwidth
500 MHz
Rise time
< 800 ps
Cable length
3 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO10

Order number 1804.5000P15

Click on order no. to copy
Order number 1804.5000P15 is now copied to your clipboard.
Bandwidth
1 GHz
Rise time
< 450 ps
Cable length
3 meters
Probe tips included
ZISO-Z201, ZISO-Z301

R&S®RT-ZISO01L

Order number 1804.5000P21

Click on order no. to copy
Order number 1804.5000P21 is now copied to your clipboard.
Bandwidth
100 MHz
Rise time
< 4 ns
Cable length
10 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO02L

Order number 1804.5000P22

Click on order no. to copy
Order number 1804.5000P22 is now copied to your clipboard.
Bandwidth
200 MHz
Rise time
< 2 ns
Cable length
10 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO03L

Order number 1804.5000P23

Click on order no. to copy
Order number 1804.5000P23 is now copied to your clipboard.
Bandwidth
350 MHz
Rise time
< 1.14 ns
Cable length
10 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO05L

Order number 1804.5000P24

Click on order no. to copy
Order number 1804.5000P24 is now copied to your clipboard.
Bandwidth
500 MHz
Rise time
< 800 ps
Cable length
10 meters
Probe tips included
ZISO-Z301

R&S®RT-ZISO10L

Order number 1804.5000P25

Click on order no. to copy
Order number 1804.5000P25 is now copied to your clipboard.
Bandwidth
1 GHz ext.
Rise time
< 450 ps
Cable length
10 meters
Probe tips included
ZISO-Z201, ZISO-Z301

Available options

Probe tips
Product
Description
R&S®ZISO-Z101

Order number 1803.4100.02

Click on order no. to copy
Order number 1803.4100.02 is now copied to your clipboard.
Description

MMCX probe tip with 1.5x, 8 Vrms, ±45 Vpk , 50 Ω, 1000 V CAT III

Tip length with 36 cm (14 inch)

R&S®ZISO-Z201

Order number 1803.4200.02

Click on order no. to copy
Order number 1803.4200.02 is now copied to your clipboard.
Description

R&S®MMCX probe tip with 10x, 300 Vrms, 10 MΩ, 1000 V CAT III

Tip length with 21 cm (8 inch)

R&S®ZISO-Z202

Order number 1803.4300.02

Click on order no. to copy
Order number 1803.4300.02 is now copied to your clipboard.
Description

Square pin probe tip with 25x, 750 Vrms, 10 MΩ, 1000 V CAT III

Tip length with 32 cm (12 inch)

R&S®ZISO-Z203

Order number 1803.4400.02

Click on order no. to copy
Order number 1803.4400.02 is now copied to your clipboard.
Description

Wide square pin probe tip with 100x, 2500 Vrms, 10 MΩ, 1000 V CAT III

Tip length with 38 cm (15 inch)

R&S®ZISO-Z301

Order number 1803.4500.02

Click on order no. to copy
Order number 1803.4500.02 is now copied to your clipboard.
Description

Isolated browser tip with 10x, 300 Vrms, 10 MΩ, 300 V CAT III

Tip length with 120 cm (47 inch)

R&S®ZISO-Z302

Order number 1803.4600.02

Click on order no. to copy
Order number 1803.4600.02 is now copied to your clipboard.
Description

Isolated browser tip with 100x, 3540 Vrms, 100 MΩ, 1000 V CAT III

Tip length with 120 cm (47 inch)

Cables
Product
Description
R&S®ZISO-B403

Order number 1804.5017.02

Click on order no. to copy
Order number 1804.5017.02 is now copied to your clipboard.
Description

3 meter (10 foot) optical fiber cable 

installed and calibrated with base unit when ship

R&S®ZISO-B410

Order number 1804.5023.02

Click on order no. to copy
Order number 1804.5023.02 is now copied to your clipboard.
Description

10 meter optical fiber cable (33 feet)

installed and calibrated with base unit when shipped

Bandwidth options
Product
Description
R&S®ZISO-B901

Order number 1804.5030.02

Click on order no. to copy
Order number 1804.5030.02 is now copied to your clipboard.
Description

100 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B902

Order number 1804.5046.02

Click on order no. to copy
Order number 1804.5046.02 is now copied to your clipboard.
Description

200 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B903

Order number 1804.5052.02

Click on order no. to copy
Order number 1804.5052.02 is now copied to your clipboard.
Description

350 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B905

Order number 1804.5069.02

Click on order no. to copy
Order number 1804.5069.02 is now copied to your clipboard.
Description

500 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B910

Order number 1804.5075.02

Click on order no. to copy
Order number 1804.5075.02 is now copied to your clipboard.
Description

1 GHz bandwidth option

installed and calibrated with base unit when shipped

Probe accessories
Product
Description
R&S®RT-ZAMXSQ

Order number 1803.1647.02

Click on order no. to copy
Order number 1803.1647.02 is now copied to your clipboard.
Description

R&S®RT-ZAMXSQ MMCX TO DUAL SQUARE PIN

5x MMCX Y-lead adapter, MMCX socket to
2x 0.025'' (0.635mm) socket, compatible
with square pins with 0.100''
(2.54mm) space, -40°C to +125°C

R&S®RT-ZAMXPAD

Order number 1803.1653.02

Click on order no. to copy
Order number 1803.1653.02 is now copied to your clipboard.
Description

R&S®RT-ZAMXPAD MMCX TO SOLDER-IN FLEX HT

3 pieces MMCX solder-in cable adapter
high temperature , MMCX socket
with 50O RF micro coax cable to flex
solder-in pad,
-40°C to +155°C (1x 0O, 1x 36O, 1x 75O)

R&S®RT-ZAMXHTS

Order number 1803.1660.02

Click on order no. to copy
Order number 1803.1660.02 is now copied to your clipboard.
Description

R&S®RT-ZAMXHTS MMCX SOLDER-IN CABLE HT

2 pieces MMCX solder-in cable adapter
high temperature MMCX socket with 50O
RF micro coax cable and open end,
-40°C to +155°C

R&S®RT-ZAMXUFL

Order number 1803.1676.02

Click on order no. to copy
Order number 1803.1676.02 is now copied to your clipboard.
Description

R&S®RT-ZAMXUFL MMCX TO U.FL ADAPTER

2 pieces MMCX cable adapter
MMCX socket with 50O RF micro coax cable
to U.FL plug, -40°C to +125°C

Isolated probing system for oscilloscopes - Mediacenter

Introducing the new probe system

Introducing the new probe system

Isolated probing system for accurate measurements in high noise power electronics environments.

Measuring accurately in wide bandgap application

Measuring accurately in wide bandgap application

Accurately measure fast switching signals in noisy environments with RT-ZISO, ideal for WBG testing.

Safe to measure and easy to operate

Safe to measure and easy to operate

Learn about RT-ZISO safety features and effortless setup to transform your testing workflow.

Probe tips considerations

Probe tip considerations

MMCX, Square Pins, or Browser Tip? Compare the pros and cons. Choose the best for your testing needs.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.