56 Results
Watch this video to explore its underlying performance while measuring error vector magnitude (EVM) of a 100 MHz wide 5G NR signal at 47.2 GHz. On December 10, 2019 the US regulator, the Federal Communications Commission (FCC), started the so-called auction 103 for spectrum licenses in the 37 GHz, 39 GHz and 47 GHz frequency bands.
ACLR, raw EVM, gain compression and many more results can be measured from a single capture using almost any input signal – whether mobile comms, satellite or just a ramp signal. With the option to calculate and apply pre-distorted waveforms within the measurement option, the spectral performance and EVM gains can be evaluated when applying a DPD algorithm.
Generation and Analysis of ZigBee™ IEEE802.15.4 signals in the 2.4 GHz band
21-Jun-2007 | AN-No. RSI03
07-Nov-2023
When innovation meets production – Rohde & Schwarz exhibits at productronica 2023Innovation and production – hand in hand. The Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Visit us at booth A1/375.
This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.
18-Apr-2016 | AN-No. 1EF93
This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.
02-Sep-2014 | AN-No. 1MA217
16-Jan-2023
New R&S PVT360A one box solution for FR1 base station, small cell, and RF component characterization and production testRohde & Schwarz introduces the new R&S PVT360A performance vector tester, a VSG/VSA single box tester optimized for FR1 base station, small cell and RF component testing in production and characterization environments.
This application note presents generator test solutions for WLAN IEEE 802.11ax high efficiency (HE) receiver testing. This document shows how to test 802.11ax receiver specifications and the HE trigger-based PPDU specifications according to the IEEE P802.11ax/D1.3 specification draft.
16-Aug-2017 | AN-No. 1GP115
Key parameters such as EVM and the AM-AM curve are measured and the compensating effect of digital predistortion is shown. amplifier, AM-AM, AM-PM, saturation, non-linearity, digital predistortion, FSV3-K18 This video shows how to measure the distortions caused by an amplifier under test.
The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.
22-Aug-2014 | AN-No. 1MA231
R&S®PWC200 Plane Wave Converter - Product Brochure
The R&S ® SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S ® FSW enables full PA characterization, including EVM, gain and distortion measurements. FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows simplified PA characterization with envelope tracking presented at GSMA MWC 2015
16-Mar-2020
Rohde & Schwarz enables sub-THz ultra wideband signal analysisRohde & Schwarz is paving the way for research in the terahertz frequency range by demonstrating multi gigabit data transmission in the D-Band at 140 GHz. The setup features the R&S FSW high-end signal and spectrum analyzer equipped with an R&S FSW-B8001 option, supporting an unparalleled 8.3 GHz internal analysis bandwidth. This new hardware option will be available soon from Rohde & Schwarz.
The example shows an error vector magnitude (EVM) measurement on a two-channel 5.2 Gsample analog to digital converter from Texas Instruments using the R&S®SMW200A vector signal generator, the R&S®SMA100B RF and microwave analog signal generator and the R&S®VSE vector signal analysis software from Rohde & Schwarz.
09-Sep-2021
Rohde & Schwarz introduces R&S VSESIM-VSS that combines EDA simulation with hardware testingT&M expert Rohde & Schwarz and Cadence have collaborated on a solution aimed at simplifying the engineering process from RF design to implementation and enhancing accuracy by using realistic signals for both simulation and testing. The new R&S VSESIM-VSS signal creation and analysis tool speeds up the development process for RF components. It is particularly useful for customers in the wireless, automotive, and aerospace and defense industries as well as for manufacturers of active components and systems.
23-May-2023
Rohde & Schwarz to host RF Design Challenge at IMS2023At IMS2023, Rohde & Schwarz is set to exhibit a range of live demos that showcase the cutting-edge developments within the industry. IMS attendees will also have the opportunity to participate in the interactive "Are you a genius?" RF Design challenge, putting their knowledge to the test at the Rohde & Schwarz booth.
10-Sep-2020
Rohde & Schwarz upgrades R&S FSW signal and spectrum analyzer to 8.3 GHz internal analysis bandwidthWith the new R&S FSW-B8001 option, the well-established R&S FSW high-end signal and spectrum analyzer now supports an industry-leading 8.3 GHz internal analysis bandwidth, offering unequaled dynamic range and sensitivity. Design engineers developing latest radar and wireless communications technologies as well as future satellite systems will benefit significantly from the extended bandwidth available in a one-box solution.
26-Jan-2021
R&S SMM100A vector signal generator redefines midrange signal generation for 5G, Wi-Fi 6E and much moreRohde & Schwarz introduces the R&S SMM100A, the only vector signal generator with mmWave testing capabilities in its class. The instrument meets the rigorous expectations for generating digital signals for the most advanced wireless communication devices entering production, as well as for developing future products and technologies.
22-Dec-2021
Rohde & Schwarz collaborates with Broadcom on test solution for next generation 6-GHz Wi-Fi devicesThe R&S CMP180 radio communication tester has been successfully validated for Broadcom’s Wi-Fi 6E chipsets. OEMs and ODMs of wireless devices are now able to bring their first next generation 6-GHz products to the market.
15-Dec-2022
CES 2023: Rohde & Schwarz and Broadcom collaborate on Wi-Fi 7 test solution for next generation wireless devicesRohde & Schwarz and Broadcom have successfully validated the R&S CMP180 radio communication tester for Broadcom Wi-Fi 7 chipsets. OEMs and ODMs of wireless devices can now get their first Wi-Fi 7 products ready for market.
23-Feb-2023
Rohde & Schwarz and Broadcom extend test collaboration for latest Wi-Fi 7 access point chipsetsRohde & Schwarz and Broadcom have successfully validated the R&S CMP180 radio communication tester for production testing of the latest Broadcom Wi-Fi 7 access point chipsets. A Wi-Fi 7 test setup with the R&S CMP180 and a Broadcom Wi-Fi 7 device will be demonstrated at the Rohde & Schwarz booth at the Mobile World Congress 2023 in Barcelona.
13-Apr-2021
Rohde & Schwarz updates R&S PWC200 to provide even more accuracy in 5G FR1 base station OTA testingThe latest software update to the R&S PWC200 plane wave converter (PWC) increases measurement accuracy and refines usability thanks to a new calibration method. With these updates, Rohde & Schwarz extends the possible use cases of its innovative 5G massive MIMO base station testing solution in R&D, quality assurance and production as well as conformance testing. While the software will be preinstalled in new units, existing R&S PWC200 units can be upgraded.
13-Jun-2024
Rohde & Schwarz achieves breakthrough in sub-THz research with 140 GHz multi-channel transceiver characterizationRohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.
06-Sep-2022
From gigahertz to terahertz, Rohde & Schwarz exhibits latest mmWave test solutions at EuMW 2022 in MilanRohde & Schwarz will showcase at EuMW in Milan the latest testing capabilities for microwave components and new solutions for the road to 6G.