R&S®ELEKTRA Test Software - Mediacenter

Conducted immunity tests based on EN61000-4-6

In this video, we dive into conducted immunity testing based on IEC 61000-4-6 standard using Elektra in simulation mode.We will briefly walk you through the CDN & BCI testing methods stated in the standards.

Amplifier checks using R&S®ELEKTRA Test Software

In this video, we dive into amplifier linearity & stauration checks based on IEC 61000-4-3 & IEC 61000-4-6 standard using R&S®ELEKTRA in simulation mode. We will briefly walk you through the clauses mentioning about linearity & saturation checks in standards.

Understanding customized reporting in ELEKTRA

Watch this video to learn more about the ELEMC-REP option of R&S ELEKTRA EMC test automation software which enables users to create customized test summary reports by building on predefined report templates.

Create signal path

Watch this video to learn more about how to create a signal path for calibration using R&S ELEKTRA EMC test automation software.

Understanding oscilloscope drivers in ELEKTRA

Watch this video to learn more about the ELEMC-SCP option of R&S ELEKTRA EMC test automation software which enables users to integrate oscilloscopes into their test setup for EUT monitoring during Immunity testing.

Attenuation Table

Learn in this short video about R&S®ELEKTRA EMC test automation software how to assign the attenuation table.

Device List

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices..

Reference Calibration Test Report

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report.

Run test

Learn in this short video about R&S®ELEKTRA EMC test automation software how to run the test.

Test Report Configuration

Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test report.

Test Template

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create a test template

System path calibration

Learn in this short video about R&S®ELEKTRA EMC test automation software how to calibrate the system path..

EUT Test Template

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the EUT test template.

Hardware setup

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware.

Tools setting

Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test basics.

Path switching

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching.

Automotive measurements with R&S®ELEKTRA

In this webinar, we will give a general introduction to our new EMC software ELEKTRA and highlight some features with are relevant for automotive standards.

Logiciel d'inspection visuelle R&S®AdVISE - Surveillance d'objets en rotation

Cette vidéo illustre comment utiliser le R&S®AdVISE pour surveiller le nombre de révolutions d'objets en rotation.

Logiciel d'inspection visuelle R&S®AdVISE − Surveillance des indicateurs analogiques

Cette vidéo illustre comment utiliser le R&S®AdVISE pour surveiller un indicateur analogique.

Augmentez votre débit de test

Interface utilisateur intuitive

Pour commencer rapidement