Key Facts
Analysis bandwidth of up to 1 GHz, outstanding phase noise of –120 dBc/Hz and a high dynamic range give the R&S®FSVA3000 signal and spectrum analyzer everything needed for demanding 5G NR measurement applications. High measurement speeds and easy usability make it ideal for demanding signal analysis, both in the lab and on the production line.
The R&S®FSVA3000 signal and spectrum analyzer is ideal for evaluating wireless communications signals in R&D, system testing, verification and production. With 400 MHz of analysis bandwidth, it can capture four neighboring 5G NR carriers at once. The dedicated options for 5G NR signal analysis enable EVM values better than 1% for a 100 MHz wide carrier at 28 GHz.
5G NR signal analysis
Analysis of a 5G NR signal with the R&S®FSV3-K144 (downlink) and R&S®FSV3-K145 (uplink) options
Up to 1 GHz analysis bandwidth, high dynamic range and low phase noise
Many measurement applications in the wireless, A&D and component industries require low phase noise, wide analysis bandwidth and high dynamic range. The R&S®FSVA3000 signal and spectrum analyzer is the perfect tool for the production and verification of wireless communications systems and their components and also for service and maintenance applications in the A&D market.
Captures ten 5G NR carriers at once
The maximum analysis bandwidth of 1 GHz makes it possible to simultaneously capture up to ten 5G NR carriers of 100 MHz bandwidth each.
The R&S®FSVA3000 excels with fast access to measurement results thanks to its simple and fast setup
The R&S®FSVA3000 features
R&S®FSVA3000 event based actions
Simple troubleshooting of rare DUT events: choose an event such as a limit line failure or a screenshot from touch-down menus.
Fast measurement speed for production
Automated production of components, modules and devices requires spectral measurements as well as signal demodulation. The R&S®FSVA3000 signal and spectrum analyzer performs even complex measurement scenarios in a minimum amount of time.
The enhanced computer power option provides a quad core CPU to accelerate digital signal demodulation. It also adds an internal PCIe 3.0 bus system for fastest transfer of measurement data. In cloud based test systems, the optional 10 Gbit/s LAN interface enables fast I/Q data transfer to the network.
ACLR measurement
FFT based ACLR measurements provide significant speed improvements over swept measurements. The R&S®FSVA3000 still has an excellent dynamic range.
GSM/EDGE/EDGE evolution/VAMOS measurements
3GPP FDD (WCDMA) BS measurements
(incl. HSDPA and HSDPA+)
3GPP FDD (WCDMA) MS measurements (incl. HSUPA and HSUPA+)
EUTRA/LTE FDD BS measurements
EUTRA/LTE FDD UE measurements
EUTRA/LTE BS MIMO measurements
(R&S®FSV3-K100 or R&S®FSV3-K104 option required)
EUTRA/LTE UL advanced UL measurements
(R&S®FSV3-K101 or R&S®FSV3-K105 option required)
EUTRA/LTE TDD BS measurements
EUTRA/LTE TDD uplink measurements
EUTRA/LTE NB-IoT downlink measurements
3GPP 5G-NR DL measurements
3GPP 5G-NR UL measurements
3GPP 5G-NR combined DL ACLR/SEM/EVM measurements
(R&S®FSV3-K144 option required)
5G NR multi-CC combined ACLR/SEM/EVM measurements
Requires R&S(R)FSV3-K147
5G NR R16 Extension for UL/DL
(FSV3-K144 or FSV3-K145 option required)
5G NR Rel. 17 extension for UL/DL
(R&S®FSV3-K148 and R&S®FSV3-K144 or R&S®FSV3-K145 option required)
O-RAN measurements
Requires R&S®FSV3-K10x or R&S®FSV3-K14x
Bluetooth BR/EDR/LE measurements
WLAN 802.11a/b/g measurements
WLAN 802.11n measurements
(R&S®FSV3-K91 option required)
WLAN 802.11ac measurements
(R&S®FSV3-K91 option required)
WLAN 802.11ax measurements
(R&S®FSV3-K91 option required)
WLAN 802.11p measurements
(R&S®FSV3-K91 option required)
WLAN 802.11be measurements
(R&S®FSV3-K91 option required)
Analog modulation analysis for AM/FM/φM
Power Sensor Support
Amplifier measurements
Direct DPD measurements
(R&S®FSV3-K18 option required)
Frequency response measurements
(R&S®FSV3-K18 option required)
Memory-Polynomial DPD
(R&S®FSV3-K18 and R&S®FSV3-K18D option required)
Noise figure and gain measurements
Phase noise measurements
EMI measurements
CISPR Calibration for FSC3-K54
Vector signal analysis
Multi-modulation analysis
(R&S®FSV3-K70 option required)
BER PRBS measurements
(R&S®FSV3-K70 option required)
OFDM signal analysis
200 MHz real-time spectrum measurements
User defined frequency correction by SnP file
External frontend control
I/Q noise cancellation
Pulse measurements
Transient measurements
Transient chirp measurements
(R&S®FSV3-K60 option required)
Transient hop measurements
(R&S®FSV3-K60 option required)
Transient phase noise measurements
R&S®FSV3-K60C or R&S®FSV3-K60H option required.
Pulse measurements application
Transient measurements
Transient analysis
Transient chirp measurements
Transient analysis, requires R&S®VSE-K60
Transient hop measurements
Transient analysis, requires R&S®VSE-K60
Analog modulation analysis (AM/FM/φM)
Modulation analysis for AM/FM/φM modulated single carriers
Vector signal analysis
OFDM signal analysis
User-defined Frequency Correction by SnP File
Amplifier measurements
Frequency response measurements
Direct DPD measurements
Memory polynomial DPD
Multi-modulation analysis
R&S®VSE-K70 option required
BER PRBS measurements
R&S®VSE-K70 option required
GSM measurements
GSM/EDGE/ EDGE Evolution
3GPP FDD measurements
WCDMA signal analysis
EUTRA/LTE FDD uplink and downlink measurement application
LTE signal analysis
EUTRA/LTE advanced and MIMO (downlink)
LTE signal analysis
EUTRA/LTE TDD uplink and downlink measurement application
LTE signal analysis
EUTRA/LTE
Narrowband IoT analysis
5G NR uplink and downlink measurement application
O-RAN measurements
IEEE 802.11a/b/g measurements
WLAN signal analysis
IEEE 802.11p measurements
WLAN signal analysis
IEEE 802.11n measurements
WLAN signal analysis
IEEE 802.11ac measurements
WLAN signal analysis
IEEE 802.11ax measurements
WLAN signal analysis
Produits associés
