R&S®SMA100B RF and microwave signal generator

Key Facts

Frequency range: 8 kHz to 3, 6, 12.75, 20, 31.8, 40, 50 and 67 GHz (overrange up to 72 GHz). Frequency extension from 50 GHz to 170 GHz with the R&S®SZM frequency multiplier
SSB phase noise of –132 dBc (typ.) at 10 GHz and 10 kHz offset
Wideband noise of –162 dBc (meas.) at 10 GHz and 30 MHz offset
Maximum output power exceeds 30 dBm across wide frequency ranges
Diverse functionalities such as User Correction, Closed Loop Power Control and High dynamic uninterrupted level sweep. For more details please refer to "features and benefits" and the videos below

Richiedi un preventivo Configure your product

Performance leadership without compromise up to 67 GHz, with upconverter up to 170 GHz

The R&S^®SMA100B RF and microwave signal generator delivers uncompromising maximum performance. It provides the purest output signals while maintaining the highest output power levels with the lowest harmonics, far outpacing the competition. As the world's leading signal generator, it can handle the most demanding module and system T&M tasks in the RF semiconductor, wireless communications, aerospace and defense industries.

Quick Links

Features & benefits

First-class devices thanks to first-class signals

The R&S®SMA100B delivers uncompromising maximum performance.

It provides the purest output signals with the highest output power levels and the lowest harmonics.
Frequency range from 8 kHz up to 67 GHz (overrange 72 GHz)
Frequency extension from 50 GHz to 170 GHz with the R&S®SZM frequency multiplier
Lowest SSB phase noise of –132 dBc (typ.) at 10 GHz and 10 kHz offset
Virtually no wideband noise of –162 dBc (meas.) at 10 GHz and 30 MHz offset
Maximum output power exceeds 30 dBm across wide frequency ranges
Exceptionally low harmonics
State-of-the-art GUI with touch display

**SSB phase noise for different frequencies** - Measured SSB phase noise performance of the R&S®SMA100B with the R&S®SMAB-B711(N) option

Very high uncompromising output power

Large dynamic range, excellent level accuracy and level repeatability

Very high output power is often required in the microwave frequency range because the higher the frequency, the more attenuation. The R&S®SMA100B offers different output power stages to compensate for such losses. As a result, no downstream external amplifier is required. Exceptionally high output power levels (measured values)

Ultra high output power up to 38 dBm with the 6 GHz instrument
Over 30 dBm at 18 GHz and 28 dBm at 20 GHz with the 20 GHz instrument
Over 30 dBm between 20 GHz and 36 GHz with the 40 GHz instrument
Over 22 dBm between 40 GHz and 65 GHz with the 67 GHz instrument

**Maximum measured output power** - Measured maximum available output power for the 50 GHz and the 67 GHz instrument (standard, high and ultra-high output power options)

UCOR (user correction)

Compensation of an external frequency response

DUTs are often connected to the signal generator via long cables or other frequency dependent components, making it very important to compensate for frequency response. The R&S®SMA100B provides a user correction (UCOR) function for this purpose. Together with an R&S®NRP power sensor, the UCOR values are automatically determined at the push of a button. A frequency response compensated RF signal is available at the new reference plane for UCOR.

**Setup and UCOR function** - Relative output power display when using cables and other components (with their own frequency response) between the R&S®SMA100B and a DUT.

Closed loop power control (CLPC)

Dynamic compensation of external frequency responses and drifts by the R&S®SMA100B with a connected R&S®NRP power sensor

The dynamic closed loop power control is a standard feature of the R&S®SMA100B. In combination with an R&S®NRP power sensor, the dynamic closed loop power ensures highly accurate and stable input power over time to the DUT regardless of unexpected signal chain losses or gains, unwanted power drifts in the setup or target level changes. The 1GP141 application note describes in great detail the closed loop power control function, the possible signals,suitable signal generator, R&S®NRP power sensors and what needs to be taken into account. Please read the application note before using the closed loop power control for the first time to avoid a possible damage to the DUT.

Uninterrupted level sweep with high dynamic range

When measuring gain transfer functions or output saturation points in amplifiers with an integrated automatic level control (ALC), the signal generator must provide a wide uninterrupted level sweep range. The R&S®SMA100B with the R&S®SMAB-K724 option provides the following:

Blank-free (uninterrupted) level sweep with exceptionally high dynamic range
High level linearity across the entire level sweep range

Uninterrupted high dynamic range level sweep with the R&S®SMA100B

High-end ADC and DAC component testing

Measure the true performance of your device

Analog input bandwidth and required clock frequency increase with each new ADC generation. The increase in the effective number of bits also results in a larger signal-to-noise ratio. This means that extremely clean, high-frequency signals exceeding the DUT performance are required to test ADCs and DACs. The outstanding R&S®SMA100B performance is perfect for optimizing DUTs and making improvements technically feasible in the first place.

**The R&S®SMA100B in an ADC/DAC application** - Compact ADC test setup for clock signals up to 6 GHz using a single R&S®SMA100B with an integrated second source

R&S®NRP power sensor connectivity

An R&S®NRP power sensor can be connected to the R&S®SMA100B

A DUT is rarely connected directly to the generator. Cables and other components are often between the generator and the DUT. This shifts the reference plane from the generator RF output to the DUT. An R&S®NRP power sensor can be connected to the R&S®SMB100B for extremely precise calibration (tenth of a dB) on the new reference plane.

**R&S®NRP power sensor connectivity** - R&S®SMA100B with connected Rohde & Schwarz power sensor

R&S®LegacyPro: refresh your technology

Trade in your legacy signal generators

R&S®LegacyPro enables the R&S®SMA100B to reliably emulate a wide range of legacy generators from vendors such as Keysight, Agilent, HP, Anritsu and Rohde & Schwarz. As a result, the R&S®SMA100B can be deployed in legacy systems without major software changes, effectively increasing uptime, lowering cost of ownership and lengthening the useful life of the test system.

User friendly in every detail

Easy integration into test systems and innovative operating features

Flexible 2 HU or 3 HU housing
3 HU with large 7" display and multiple front panel connectors
Ergonomic GUI with touch display
Frequently used items can be added to user menus for quick and easy access to any necessary settings in one place
The R&S®SMA100B also has a SCPI macro recorder with a code generator to automatically record manual settings and create an executable MATLAB® script

Available options

Related videos

12:54

Configuring Closed-Loop Power Control on the SMA100B

Learn how to configure and use closed-loop power control on Rohde & Schwarz analog and vector signal generators based on the example of the R&S®SMA100B .

nov 27, 2024

Angle of Arrival Simulation for Multi-Channel Receivers

07:24

Simulazione dell’angolo di arrivo per ricevitori multicanale

Questo video mostra come definire uno scenario di radiogoniometria nel software R&S®Pulse Sequencer e come riprodurre lo scenario su una configurazione di misura a 4 canali del generatore R&S®SMW200A che è stata allineata in termini di ampiezza, ritardo e fase.

dic 09, 2020

Rohde-Schwarz-SMW200A-RF-Ports-Alignment-Getting Started

14:39

R&S®SMW200A - Allineamento delle porte RF - Guida rapida

Questo video mostra come impostare i generatori di segnali vettoriali R&S®SMW200A e utilizzare l’opzione Allineamento delle porte RF SMW-K545 insieme al software RFPAL PC per generare segnali multipli che sono allineati in ampiezza, ritardo e fase all’ingresso di un dispositivo in prova multiporta.

dic 09, 2020