1334 Resultados
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
Jan 31, 2024 | N.º de nota de aplicación 1SL410
Quickly and reliably trigger and decode packets from your I2C bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
Quickly and reliably trigger and decode packets from your RS232 or RS485 buses using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the data format or display a decode table.
Quickly and reliably trigger and decode packets from your LIN bus using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the bit rate or threshold voltage or display a decode table.
Sep 09, 2021
Rohde & Schwarz introduces R&S VSESIM-VSS that combines EDA simulation with hardware testingT&M expert Rohde & Schwarz and Cadence have collaborated on a solution aimed at simplifying the engineering process from RF design to implementation and enhancing accuracy by using realistic signals for both simulation and testing. The new R&S VSESIM-VSS signal creation and analysis tool speeds up the development process for RF components. It is particularly useful for customers in the wireless, automotive, and aerospace and defense industries as well as for manufacturers of active components and systems.
Jul 22, 2020
Rohde & Schwarz presents economy vector signal generator for the automotive, IoT and education sectorsRohde & Schwarz presents economy vector signal generator for the automotive, IoT and education sectors.
This includes basic interference hunting using spectrum analyzers, expert interference hunting using real-time receivers, and automatic direction finding and emitter location using radiolocation software.
This video shows how you can precisely characterize the ESR and ESL of electric vehicle traction inverter DC-link capacitors over a frequency range of interest using the Zurich Instruments MFIA impedance analyzer.
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
May 17, 2023 | N.º de nota de aplicación 1SL386
eCall Conformance Testing
Jan 24, 2018 | N.º de nota de aplicación 1MA241
Methods for distributed sensing using OFDM based signals for joint communications and sensing Folletos y fichas técnicas Miscellaneous
Oscilloscope Days - School of measurement
Dr. Gabriel Rojas
Oct 26, 2022
Rohde & Schwarz joins forces with Tsinghua University, Actenna Technology and others to conduct RIS technology trialsTo further exploit the huge potential of 5G, the wireless industry has continued to develop the standard up to Release 16, and development continues. But technology does not stand still, and even as 5G presses forward, a new generation of cellular technology is emerging. Cutting-edge 6G research is already underway at communications equipment manufacturers and research institutions, and reconfigurable intelligent surfaces (RIS) is a major area of interest in 6G research. Rohde & Schwarz, with Tsinghua University and Actenna Technology, recently completed an evaluation and trial of RIS technology to comprehensively evaluate the effects and performance of RIS deployment.
Mar 14, 2023
CAICT selected R&S CMX500 OBT to enable SPEAG DASY8 system for SAR and HAC tests of 5G NR devicesThe China Telecommunication Technology Labs (CTTL) Terminal labs at the China Academy of Information and Communications Technology (CAICT) successfully conducted specific absorption rate and hearing aid compatibility testing for 5G new radio mobile devices. The lab upgraded their DASY8 high-precision electromagnetic near-field scanning platform from SPEAG, the leading provider of dosimetric test systems, with the R&S CMX500 OBT 5G one-box signaling tester from Rohde & Schwarz. SPEAG and Rohde & Schwarz have been long-term partners with CAICT and have supported and equipped CTTL with testing solutions and provided support.
Jun 08, 2022
Rohde & Schwarz presents its full range of embedded systems test solutions at embedded world 2022Nuremberg will be home to the international embedded industry once again during embedded world Exhibition & Conference. Rohde & Schwarz will be showing its latest test solutions from June 21 to 23, 2022 at booth 4-218 of Nuremberg Exhibition Centre. There, visitors can experience product highlights like the new generation of the R&S RTP high-performance oscilloscope, and they can learn from the Rohde & Schwarz experts about state-of-the art test solutions for all kinds of embedded systems.
Using network analyzers to measure fluids, gels and solids - White Paper
This video introduces the Entry Level set and shows the step-by-step Conducted Emissions measurements using FPC1000, LISN and EMI Software. This video introduces the Entry Level set and shows the step-by-step Conducted Emissions measurements using FPC1000, LISN and EMI Software.
RF and microwave basics 3 We explain RF propagation by using the picture of the ripple on a pond. We explain RF propagation by using the picture of the ripple on a pond. RF and microwave basics 3 RF and microwave basics 3
Sep 16, 2020
Rohde & Schwarz unveils session border controller with strong security and high availability for critical ATC infrastructuresR&S ATC-SBC uses state-of-the-art technology to protect voice over IP (VoIP) networks. SBCs are commonly used in networks as border elements between two security domains to provide protection. What makes R&S ATC-SBC unique is that it is the only solution on the market that supports the ED-137A , B and C international standards.
Using a test setup from Rohde & Schwarz and VIAVI Solutions run tests conforming to O-RAN ALLIANCE specifications on an Analog Devices 8T8R radio reference platform.
Neural Receiver with 5G NR Multiple MIMO Signals Using Machine Learning (ML) powered by Artificial Intelligence for signal processing tasks in wireless communication really is beginning to move from theory to practic
Nonlinear applications using Rohde & Schwarz vector network analyzers - Product Flyer
Jun 13, 2024
Rohde & Schwarz achieves breakthrough in sub-THz research with 140 GHz multi-channel transceiver characterizationRohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.
How can I add a attenuation table to my cable, used in my measurement setup?
I want to set the acquisition mode to Average + HR using SCPI commands. But I can not find the right command in the manual.
and Impedance Analyzers from Rohde & Schwarz are ideal for measuring impedance at a fixed frequency as well as for determining the best operating point for the component under test The LCR Meters and Impedance Analyzers from Rohde & Schwarz are ideal for measuring impedance at a fixed frequency as well as for determining the best operating point for the component under test Impedance Measurements using
Application Note Peak and Mean Power measurements on wideband FMCW radar signals
Jun 28, 2019 | N.º de nota de aplicación 1EF107
This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND.
Sep 19, 2022 | N.º de nota de aplicación 1SL367
Oct 22, 2019
R&S®Cloud Protector by Rohde & Schwarz Cybersecurity receives international Security AwardComputing Security Awards 2019: R&S®Cloud Protector security solution wins category "New Cloud Delivered Solution of the Year".
Oct 12, 2022
Rohde & Schwarz empowers launch of 4D imaging radar platform by automotive radar manufacturer Cubtek in partnership with NXPCubtek Inc. is using network analyzers from Rohde & Schwarz in the development of 4D imaging radar for RF measurement of the E-band. Rohde & Schwarz oscilloscopes and their independently developed, application-specific integrated circuits (ASIC) provide the best measurement tools for automotive radar research and development.