R&S®HX002H3/H3M HF dipole with ATU

1.5 MHz to 30 MHz

R&S®HX002H3/H3M HF dipole with ATU
R&S®HX002H3/H3M HF dipole with ATU, front view
R&S®HX002H3/H3M HF dipole with ATU, front view
Abrir Lightbox
R&S®HX002H3/H3M HF dipole with ATU
R&S®HX002H3/HX002H3M HF dipole with ATU, bottom view
R&S®HX002H3/HX002H3M HF dipole with ATU, bottom view
Abrir Lightbox
R&S®HX002H3/H3M HF dipole with ATU
R&S®HX002H3/HX002H3M HF dipole with ATU, bottom high
R&S®HX002H3/HX002H3M HF dipole with ATU, bottom high
Abrir Lightbox
R&S®HX002H3/H3M HF dipole with ATU, front view R&S®HX002H3/HX002H3M HF dipole with ATU, bottom view R&S®HX002H3/HX002H3M HF dipole with ATU, bottom high

Key Facts

  • Suitable for transmitter powers up to 150 W
  • Omnidirectional coverage with high-angle radiation (NVIS), no skip zone
  • Integrated antenna tuning unit supports fast frequency hopping
  • Compact dimensions enable set up close to neighboring antennas
  • Single supporting mast
Solicitar presupuesto

For stationary or shipboard applications

R&S®HX002H3/H3M HF dipoles with ATUs enable optimum coverage of all distance ranges. They are particularly useful for short and medium distance radiocommunications, since skip zones prevent rod antennas from providing sufficient transmission reliability at distances of less than 1000 km. The fully automated ATU provides perfect matching to the transmitting system and enables use of its full RF output power capabilities. Together with the R&S®GX002, it seamlessly integrates into the R&S®Series 4100 and M3TR radio systems. A third-party system controller can run the antenna via Ethernet or it can be fully automated with minimal third-party transceiver interfaces.

Quick Links

Features & benefits

High RF power in a small antenna

The R&S®HK002H3 features relatively small, 5 m long dipole based radiators. R&S®HK002H3M dipoles are even shorter (just 2.5 m) to accommodate the limited space onboard ships. The integrated, fully automatic antenna tuning unit perfectly matches the radiators to the transmitting system, enabling full RF output power capabilities of up to 150 W.

High efficiency

The R&S®HX002H3/H3M only uses low-loss capacitors and air-core coils for matching and requires no attenuating measures such as resistor-damped structures. This is more efficient and sends more power into the airwaves.

HF-cable-only interface

The R&S®HX002H3 as well as the R&S®HX002H3M feature a single cable interface. Just one cable carries all the signals (RF, power supply and control), making installation and system integration both easier and more reliable.

Compatibility with a wide variety of transceivers

The R&S®GX002 junction unit fully controls and powers the R&S®HX002H3/H3M. The junction unit handles all communications to and from the transceiver. Universal interfaces such as LAN, coaxial and optical ports allow the junction unit to work with the latest shortwave transceivers, older Rohde & Schwarz transceivers in legacy applications and transceivers from other manufacturers.

Fully automatic operation in autonomous mode

The combination of the R&S®GX002 junction unit and the R&S®HX002H0 enables operations in "autonomous mode". This requires very few control signals and allows third-party transceivers to operate without adjusting the control protocol.

Available models

Available models
Modelos
Application
Frequency range
Max. permissible input power
Dimensions (length x width x height including rods)
Weight

R&S®HX002H3 HF dipole with ATU

Application
Stationary land based
Frequency range
1.5 Mhz - 30 Mhz
Max. permissible input power
100 W CW
150 W PEP
Dimensions (length x width x height including rods)
approx. 9.5 m x 4 m x 1.8 m
Weight
approx. 50 kg
Solicitar presupuesto

R&S®HX002H3M HF dipole with ATU

Application
For naval use
Frequency range
1.5 MHz - 30 Mhz
Max. permissible input power
100 W CW
150 W PEP
Dimensions (length x width x height including rods)
approx. 4.5 m x 2.5 m x 1.8 m
Weight
approx. 37.5 kg
Solicitar presupuesto

Available options

Accessories
Product
Descripción
R&S®KM451B1

Order Number 4028.3351.02

Click on order no. to copy
Order Number 4028.3351.02 is now copied to your clipboard.
Descripción

Lattice mast, length: 10 m (for roof mounting)

Lattice mast for the R&S®HX002, the R&S®HX002A1, the R&S®HX002H1, the R&S®HL451, the R&S®HL471, 10 meters, with guy ropes and safety climb

R&S®KM451B2

Order Number 4028.3400.02

Click on order no. to copy
Order Number 4028.3400.02 is now copied to your clipboard.
Descripción

Lattice mast, length: 15 m (standard)

Lattice mast for the R&S®HX002, the R&S®HX002A1, the R&S®HX002H1, the R&S®HL451, the R&S®HL471, 15 meters, with guy ropes and safety climb

R&S®KM002Z3

Order Number 4115.9540.02

Click on order no. to copy
Order Number 4115.9540.02 is now copied to your clipboard.
Descripción

Isolating rope set for the R&S®KM451B1/B2;
for use together with the R&S®HX002H0, R&S®HX002H1/H2/H3

R&S®KM451Z5

Order Number 4039.8308.03

Click on order no. to copy
Order Number 4039.8308.03 is now copied to your clipboard.
Descripción

Mast adapter

Mast adapter for the R&S®HX002H3 on the R&S®KM451B1/B2

R&S®KM002Z4

Order Number 4115.9740.03

Click on order no. to copy
Order Number 4115.9740.03 is now copied to your clipboard.
Descripción

Tiltable Mast

for R&S®HX002H1, R&S®HX002H3 & R&S®HX002A1 antennas, 5 meters with guy ropes

Productos relacionados

R&S®GX002 junction unit, front view

R&S®GX002
R&S®HX002H0 HF dipole with ATU, front view

R&S®HX002H0

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.