67 Результаты
EVM is an important figure of merit when testing DUTs. Customers expect test equipment to deliver excellent EVM performance out of the box, without the need for extensive configuration and calibration procedures. EVM is an important figure of merit when testing DUTs.
Sep 15, 2023
Rohde & Schwarz and IMST demonstrate active antenna array OTA-testing for satellite terminals at the EuMW 2023Rohde & Schwarz and IMST showcase OTA measurements of electrically large beamforming antenna arrays for SATCOM applications at EuMW 2023.
Jun 06, 2023
Automotive Testing Expo Europe 2023: Enabling the next level of ADAS with test & measurement solutions from Rohde & SchwarzAt Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.
Dec 08, 2022
Rohde & Schwarz and Löhnert Elektronik present a robot-based solution for end-of-line measurement of automotive radomes and bumpersTogether with its partner Löhnert Elektronik, Rohde & Schwarz has introduced a fully automated turnkey solution for bumper production radar transparency testing based on the successful R&S QAR50. The lightweight and compact setup of the R&S QAR50-R facilitates precise positioning of the measurement antennas, allowing faster, more accurate and convenient testing. This leads to higher throughput and yeilds as well as more flexiblity to adapt to different DUTs, for End-of-line (EOL) measurements of bumpers and other exterior parts.
Apr 13, 2021
Rohde & Schwarz updates R&S PWC200 to provide even more accuracy in 5G FR1 base station OTA testingThe latest software update to the R&S PWC200 plane wave converter (PWC) increases measurement accuracy and refines usability thanks to a new calibration method. With these updates, Rohde & Schwarz extends the possible use cases of its innovative 5G massive MIMO base station testing solution in R&D, quality assurance and production as well as conformance testing. While the software will be preinstalled in new units, existing R&S PWC200 units can be upgraded.
Sep 25, 2020
Rohde & Schwarz offers portfolio for precise AESA testingRohde & Schwarz offers new test and measurement solutions for TRM performance validation, enabling the customer to maximize their radar system capabilities.
Jan 10, 2022
Rohde & Schwarz 5G mmWave small cell test solution validated by Qualcomm Technologies, Inc.Rohde & Schwarz has upgraded the R&S CMP200 radio communication tester with a new option for small cell testing. Qualcomm Technologies has validated the solution, and it is now supported by the Qualcomm® Development Acceleration Resource Toolkit (QDART) for Small Cells. Manufacturers of small cell infrastructure who integrate the Qualcomm® FSM100 5G RAN Platform in their products can expect that the R&S CMP200 fulfils all necessary hardware development and production test requirements.
Sep 22, 2022
Rohde & Schwarz exhibits leading-edge test solutions for the 5G ecosystem at Mobile World Congress Las VegasRohde & Schwarz provides leading-edge test and measurement solutions for the complete 5G ecosystem and all its lifecycle stages – from R&D to manufacturing of devices and infrastructure equipment to acceptance testing – and across all the necessary stages for a network operator. Visitors to Mobile World Congress Las Vegas can experience a variety of the Rohde & Schwarz test innovations at the Las Vegas Convention Center, level 1, booth W2.920 from September 28 to 30, 2022.
Oct 27, 2021
Rohde & Schwarz once again live at productronica 2021 with T&M equipment for R&D, verification and productionRohde & Schwarz is presenting its solutions live at productronica 2021, the leading global trade show for electronics development and production. The focus is on T&M equipment for latest technologies including automotive radar, satellite communications, Wi-Fi 7 and 5G. High throughput and low cost are essential in production environments, and Rohde & Schwarz solutions support exactly these goals. Trade show visitors will find the following Rohde & Schwarz highlights and more in hall A1, booth 375 at Messe München.
Dec 17, 2020
Rohde & Schwarz and IHP first to characterize D-band frequencies in over-the-air test setup for 6G and automotive radarAcademia and key industry players have identified the D-Band, ranging from 110 GHz to 170 GHz, as a candidate frequency band for beyond 5G and 6G mobile communications as well as for future automotive radar applications. Rohde & Schwarz continues its pioneering sub-THz research efforts with focus in this frequency range, reaching new milestones. In collaboration with IHP, Rohde & Schwarz has performed the industry’s first full 2D/3D antenna characterization of transceiver modules operating in the D-Band.
Jan 27, 2022
Rohde & Schwarz furnishes EMC and radio labs of CSA Group′s new European headquarters with state-of-the-art T&M equipmentCSA Group, a global leader in testing, inspection and certification, has built a new European headquarters in Plattling in the State of Bavaria, Germany. As part of this project, CSA Group is considerably expanding its testing capabilities for German and European customers. For example, new test labs will enable a wide variety of product tests and certifications even of very large devices weighing up to 20 tonnes. The required test and measurement and amplifier equipment comes from EMC market leader Rohde & Schwarz.
Jun 11, 2024
Rohde & Schwarz presents R&S RT-ZISO isolated probing system for precise measurements of fast switching signalsRohde & Schwarz has developed the R&S RT-ZISO isolated probing system for extremely accurate measurements of fast switching signals, especially in environments with high common-mode voltages and currents.
Jun 07, 2023
Rohde & Schwarz presents first automated solution to speed up PCIe 5.0 and 6.0 cable and connector compliance testingFor precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specification, Rohde & Schwarz presents a new R&S ZNrun test automation option. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.
Feb 22, 2024
Rohde & Schwarz and MediaTek to showcase 5G NTN-NR Rel.17 connection at MWC 2024Rohde & Schwarz and MediaTek have teamed up to demonstrate a 5G non-terrestrial network (NTN) new radio (NR) connection based on the latest 3GPP Release 17 specifications at this year's Mobile World Congress in Barcelona.
Dec 04, 2023
Rohde & Schwarz is first to deliver a 5G FR1 A-GNSS OTA test solution approved by CTIA CertificationThe R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.
Jan 04, 2024
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
Apr 23, 2024
Rohde & Schwarz introduces new R&S SMB100B microwave signal generator for analog signal generation up to 40 GHzThe new R&S SMB100B microwave signal generator available up to 40 GHz brings excellent output power, spectral purity, very low close-in phase noise, and practically no wideband noise to analog microwave signal generation.
Nov 28, 2023
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
Mar 05, 2024
Rohde & Schwarz at EMV 2024: Outstanding T&M solutions from the market leader in EMCAt the EMV show 2024 in Cologne, Rohde & Schwarz showcases a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. The company dedicates a large part of the booth to demonstrations that show EMI compliance testing, EMC test automation, EMS immunity test, EMI debugging and EMF. The Rohde & Schwarz solutions are on display from March 12 to 14, 2024 at the Cologne exhibition center, hall 11.1, booth 106.
Apr 04, 2024
Rohde & Schwarz introduces new R&S NPA family of compact power analyzers for all power measurement requirementsA new family of Rohde & Schwarz power analyzers is now available in three models to meet all requirements for measuring voltage, current, power and total harmonic distortion on both DC and AC sources. The R&S NPA101 power meter provides all basic measurements, the R&S NPA501 power analyzer adds enhanced measurement functions and graphical analysis, and the R&S NPA701 compliance tester includes evaluation functions in line with IEC 62301 and EN 50564 for power consumption and EN 61000-3-2 for EMC harmonic emission testing.
Jun 05, 2023
Rohde & Schwarz, Fujikura, and Avnet validate CATR OTA test systems for 5G mmWave phased array antenna R&D testingDesigning a 5G FR2 phased array antenna module (PAAM) requires over-the-air (OTA) testing to measure parameters like equivalent isotropic radiated power (EIRP) and effective isotropic sensitivity (EIS) in addition to traditional radiation patterns. Rohde & Schwarz has joined Fujikura and Avnet to validate their new development kit for 5G mmWave phased array antenna modules. The R&S ATS800B benchtop CATR OTA test system from Rohde & Schwarz is ideal for prototype testing in an open environment.
Sep 03, 2024
Rohde & Schwarz presents its top-notch RF and microwave test solutions at the EuMW 2024 in ParisT&M specialist Rohde & Schwarz will present its industry-leading portfolio at European Microwave Week in Paris for various application fields, pushing the limits in the Gigahertz to Terahertz frequency ranges.
Feb 14, 2022
Unlimited connectivity made real – Rohde & Schwarz exhibits its unique mobile test solutions at MWC Barcelona 2022Leveraging years of experience and exceptional insight in the entire mobile industry, Rohde & Schwarz is ready to present its comprehensive, leading-edge portfolio of mobile and wireless communications testing solutions at Mobile World Congress 2022 in Barcelona.
The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers.
May 23, 2012 | Номер AN 1MA168
R&S®SMW200A RF/microwave DUT deembedding - Application Card
This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND.
Sep 19, 2022 | Номер AN 1SL367
Jul 19, 2022
Rohde & Schwarz announces on-wafer device characterization test solutionRohde & Schwarz now offers a test solution for full RF performance characterization of the DUT on-wafer which combines the powerful R&S ZNA vector network analyzer from Rohde & Schwarz with industry-leading engineering probe systems from FormFactor. As a result, semiconductor manufacturers can perform reliable and repeatable on-wafer device characterization in the development phase, during product qualification and in production.