906 Результаты
The R&S®AMS aerial monitoring system is a flying monitoring solution from Rohde & Schwarz. It consists of a drone payload that can be used to make measurements in locations that are difficult to reach with conventional systems. This solution is the perfect tool for missions high above ground. Typical tasks include measurements on microwave links and interference hunting. Aerial systems can measure emissions with unprecedented efficiency where such measurements work best.
R&S®AMS aerial monitoring system for spectrum monitoring and interference hunting
Aug 03, 2023
Rohde & Schwarz first to submit 5G Next Generation eCall test cases for GCF approvalRohde & Schwarz is first to submit 5G Next Generation eCall (NGeCall) protocol test cases to the 3GPP Global Certification Forum (GCF). The company is also launching a new 5G NGeCall application option that simulates the public safety answering point (PSAP) functions required for the end-to-end conformance tests that verify the interoperability of the equipment under test for the complete communication exchange. Both additions to the Rohde & Schwarz eCall portfolio now support early testing of new 5G Next Generation eCall systems with the R&S CMX500 one-box tester, contributing to a timely introduction of 5G NGeCall.
Dec 06, 2023
Applus and Rohde & Schwarz seamlessly integrate eCall testing in EMC test environmentsApplus Laboratories and Rohde & Schwarz have successfully showcased the seamless integration of eCall testing in an electromagnetic compatibility (EMC) test environment. The demonstration illustrated different eCall testing scenarios and capabilities in compliance with the UN ECE R10 standard, which regulates automobile-related EMC.
Jun 21, 2023
Rohde & Schwarz and Zurich Instruments present advanced test solutions at LASER World of PHOTONICS in MunichRohde & Schwarz and Zurich Instruments will present advanced test and measurement solutions for photonics at the LASER World of PHOTONICS tradeshow in Munich. Highlighted solutions include the R&S FSPN and R&S FSWP, two exceptionally powerful phase noise analyzers for characterizing laser systems. Visitors can also see demos of the R&S MXO 4 and R&S RTO6 oscilloscopes from Rohde & Schwarz as well as the Quantum Computing Control System (QCCS) and lock-in amplifiers from Zurich Instruments.
Sep 13, 2023
EuMW 2023: Rohde & Schwarz introduces the shortest possible distance simulation for FMCW radarsEuMW 2023: Rohde & Schwarz introduces the shortest possible distance simulation for FMCW radars
R&S®Series4200 Software Defined Radios - Product Brochure
Mar 05, 2024
Rohde & Schwarz at EMV 2024: Outstanding T&M solutions from the market leader in EMCAt the EMV show 2024 in Cologne, Rohde & Schwarz showcases a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. The company dedicates a large part of the booth to demonstrations that show EMI compliance testing, EMC test automation, EMS immunity test, EMI debugging and EMF. The Rohde & Schwarz solutions are on display from March 12 to 14, 2024 at the Cologne exhibition center, hall 11.1, booth 106.
Sep 09, 2024
Ryme Worldwide and Rohde & Schwarz at Automechanika 2024: An innovative way to test radar sensors during PTIThe future of mobility will be shaped by automated and autonomous vehicles. With a steadily increasing number of driver assistance systems, a key question remains: How can we guarantee the continuous functionality of these ADAS/AD systems, thereby ensuring road safety throughout a vehicle's lifetime? Ryme Worldwide and Rohde & Schwarz are answering this by introducing a new solution. It seamlessly integrates radar target simulation into existing workshop environments, enabling comprehensive ADAS and AD testing during periodic technical inspections (PTI).
Sep 12, 2024
Hanwha Defence Australia selects Rohde & Schwarz for electromagnetic compatibility assurance of Australian armoured vehiclesRohde & Schwarz will provide a turnkey electromagnetic compatibility (EMC) test system and support for an Electromagnetic Environmental Effects (E3) capability at the Hanwha Armoured vehicle Centre of Excellence (H-ACE) in Geelong.
Mar 13, 2024
Rohde & Schwarz hosts next edition of popular Oscilloscope Days event in April 2024Rohde & Schwarz will host its popular Oscilloscope Days educational event again for two days, April 17 to 18, 2024. Eight online workshop sessions will provide insights into different day-to-day testing challenges that electronic design engineers face when using oscilloscopes.
Rohde & Schwarz user manual for usage of status monitoring of complex systems
Dec 04, 2023
Rohde & Schwarz is first to deliver a 5G FR1 A-GNSS OTA test solution approved by CTIA CertificationThe R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.
Aug 01, 2024
Rohde & Schwarz Media highlights modern, secure and configurable software portfolio at IBC 2024Rohde & Schwarz will highlight its modern, cost-effective infrastructure solutions at IBC2024 (stand 7.B21, RAI Amsterdam, 13 – 16 September). The range of products has been updated using the latest software architectures and techniques to offer highly configurable systems which are stable in operation, secure against cyberthreats, yet simple to implement and scalable.
Oct 10, 2024
Patented antenna digital twin solution from Rohde & Schwarz and IMST optimizes automotive connectivityRohde & Schwarz, in collaboration with wireless communications engineering experts IMST GmbH, has developed a patented antenna digital twin solution, effectively addressing a multitude of challenges and delivering considerable benefits for vehicle manufacturers and their suppliers to optimize automotive connectivity. The solution combines measurements of the antenna characteristics with simulation of the electromagnetic wave propagation to optimize the antennas’ design and their position to ensure for example optimal WiFi coverage inside the vehicle.
May 30, 2023
Rohde & Schwarz and IEMN collaborate on 6G THz by bringing together electronic and photonic technologiesThe Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.
Sep 20, 2024
Rohde & Schwarz and NOFFZ enable the next level of automotive radar production with a new efficient solutionRohde & Schwarz introduces new options for its automotive radar target simulator R&S AREG800A. The new R&S AREG-P creates and enables an environment for a seamless transition of automotive radar sensor from R&D to production. Used standalone or as turnkey solution together with NOFFZ integrating the AREG-P into their production test systems, enables Tier1 automotive radar suppliers to increase throughput, reduce test time and optimize costs of end-of-line tests.
May 22, 2024
Rohde & Schwarz first to achieve TPAC for NTN NB-IoT RF and RRM conformance test casesAt the recent Conformance Agreement Group (CAG) meeting #78 of the Global Certification Forum (GCF), Rohde & Schwarz verified NTN NB-IoT test cases for radio frequency (RF) and radio resource management (RRM), successfully meeting all test platform approval criteria (TPAC). The R&S TS-RRM and R&S TS8980 test platforms were approved for every type of NTN NB-IoT test (RF, Demod and RRM), making Rohde & Schwarz the only company to have activated both NTN NB-IoT radio frequency (RF) and radio resource management (RRM) work items (WI) in the GCF.
Sep 16, 2024
cetecom advanced re-certifies Rohde & Schwarz's eCall PSAP for testing and collaborates on Next Generation eCallRohde & Schwarz has successfully passed its re-certification of its EU eCall test solution conducted by the independent test house cetecom advanced. This achievement underscores the commitment of both companies to providing standards-compliant, Next Generation eCall test solutions and reinforces their position as industry leaders.
Sep 26, 2023
ETS-Lindgren integrates R&S CMX500 and R&S SMBV100B for 5G A-GNSS antenna performance testingETS-Lindgren integrates R&S CMX500 and R&S SMBV100B for 5G A-GNSS antenna performance testing
Jul 09, 2024
EMITE and Rohde & Schwarz join forces to support OTA measurements on Wi-Fi 7 and 5G RedCapEMITE and Rohde & Schwarz continue their collaboration to enhance EMITE’s Over-the-Air (OTA) measurement solutions by fully integrating the latest test capabilities of the R&S CMX500 multi-technology, multi-channel one-box signaling tester.
Jun 05, 2023
Rohde & Schwarz, Fujikura, and Avnet validate CATR OTA test systems for 5G mmWave phased array antenna R&D testingDesigning a 5G FR2 phased array antenna module (PAAM) requires over-the-air (OTA) testing to measure parameters like equivalent isotropic radiated power (EIRP) and effective isotropic sensitivity (EIS) in addition to traditional radiation patterns. Rohde & Schwarz has joined Fujikura and Avnet to validate their new development kit for 5G mmWave phased array antenna modules. The R&S ATS800B benchtop CATR OTA test system from Rohde & Schwarz is ideal for prototype testing in an open environment.
Apr 10, 2024
Rohde & Schwarz launches new era of efficient, sustainable, and smart broadcast transmissionThe new R&S®TE1 is industry’s most sustainable transmitter; product debut comes alongside introduction of 24/7 remote monitoring service
Dec 22, 2023
Rohde & Schwarz verifies NXP’s next generation automotive radar sensor reference design for extremely short object distancesRohde & Schwarz verifies NXP’s next generation automotive radar sensor reference design for extremely short object distances
Jan 04, 2024
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
Mar 07, 2024
Rohde & Schwarz introduces dedicated phase noise analysis and VCO measurements up to 50 GHz with the R&S FSPN50With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.
Feb 21, 2024
Rohde & Schwarz first to test 5G eCall interoperability of Quectel’s 5G module with its wideband radio communication testerQuectel Wireless Solutions, a global IoT solutions provider, and Rohde & Schwarz have successfully validated Quectel’s innovative 5G eCall module, part of the AG56xN series of automotive modules. For the test, the R&S CMX500 wideband radio communication tester has been used. The test setup will be shown at Mobile World Congress 2024.
Sep 15, 2023
Rohde & Schwarz and IMST demonstrate active antenna array OTA-testing for satellite terminals at the EuMW 2023Rohde & Schwarz and IMST showcase OTA measurements of electrically large beamforming antenna arrays for SATCOM applications at EuMW 2023.
Jul 03, 2024
Rohde & Schwarz manages and monitors for 3CatRohde & Schwarz has provided its R&S®PRISMON multiviewer to the 3/24 Channel, 24-hour news channel of Corporació Catalana de Mitjans Audiovisuals (3Cat). The uniquely powerful networked platform allows 3/24 to monitor uncompressed IP feeds alongside SDI and NDI signals.