Поиск новостей
44 Результаты
Sep 15, 2023 | Press Release | Test & measurement
Rohde & Schwarz and IMST demonstrate active antenna array OTA-testing for satellite terminals at the EuMW 2023Active antenna arrays with beamforming capabilities are a key technology for establishing links between satellite terminals and end devices on the ground. At the European Microwave Week (EuMW) 2023 in Berlin, Rohde & Schwarz and IMST will showcase a solution for over-the-air (OTA) measurements of electrically large beamforming antenna arrays for various SATCOM applications.
Jun 06, 2023 | Press Release | Test & measurement
Automotive Testing Expo Europe 2023: Enabling the next level of ADAS with test & measurement solutions from Rohde & SchwarzAt Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.
Dec 08, 2022 | Press Release | Test & measurement
Rohde & Schwarz and Löhnert Elektronik present a robot-based solution for end-of-line measurement of automotive radomes and bumpersTogether with its partner Löhnert Elektronik, Rohde & Schwarz has introduced a fully automated turnkey solution for bumper production radar transparency testing based on the successful R&S QAR50. The lightweight and compact setup of the R&S QAR50-R facilitates precise positioning of the measurement antennas, allowing faster, more accurate and convenient testing. This leads to higher throughput and yields as well as more flexibility to adapt to different DUTs, for End-of-line (EOL) measurements of bumpers and other exterior parts.
Apr 13, 2021 | Press Release | Wireless communications
Rohde & Schwarz updates R&S PWC200 to provide even more accuracy in 5G FR1 base station OTA testingThe latest software update to the R&S PWC200 plane wave converter (PWC) increases measurement accuracy and refines usability thanks to a new calibration method. With these updates, Rohde & Schwarz extends the possible use cases of its innovative 5G massive MIMO base station testing solution in R&D, quality assurance and production as well as conformance testing. While the software will be preinstalled in new units, existing R&S PWC200 units can be upgraded.
Sep 25, 2020 | Press Release | Test & measurement for ADS
Rohde & Schwarz offers portfolio for precise AESA testingIn order to reduce complexity, costs and efforts for TRM testing, Rohde & Schwarz concentrates on test and measurement solutions to maximize the performance of AESA designs with highest precision instruments and automation of complex test scenarios.
Jan 10, 2022 | Press Release | Test & measurement
Rohde & Schwarz 5G mmWave small cell test solution validated by Qualcomm Technologies, Inc.Rohde & Schwarz has upgraded the R&S CMP200 radio communication tester with a new option for small cell testing. Qualcomm Technologies has validated the solution, and it is now supported by the Qualcomm® Development Acceleration Resource Toolkit (QDART) for Small Cells. Manufacturers of small cell infrastructure who integrate the Qualcomm® FSM100 5G RAN Platform in their products can expect that the R&S CMP200 fulfils all necessary hardware development and production test requirements.
Sep 22, 2022 | Press Release | Test & measurement
Rohde & Schwarz exhibits leading-edge test solutions for the 5G ecosystem at Mobile World Congress Las VegasAs the mobile industry is coming together at Mobile World Congress 2022 in Las Vegas, it becomes clear that 5G is already all around us. The technology is being rolled out with unprecedented speed of adoption in devices, mobile network infrastructure and network deployment. As 5G enters the mainstream, device and network equipment manufacturers are looking for purpose-built test equipment to scale with while meeting their business needs. Rohde & Schwarz exhibits leading-edge 5G test solutions to meet said needs at MWC Las Vegas.
Oct 27, 2021 | Press Release | Test & measurement
Rohde & Schwarz once again live at productronica 2021 with T&M equipment for R&D, verification and productionRohde & Schwarz is presenting its solutions live at productronica 2021, the leading global trade show for electronics development and production. The focus is on T&M equipment for latest technologies including automotive radar, satellite communications, Wi-Fi 7 and 5G. High throughput and low cost are essential in production environments, and Rohde & Schwarz solutions support exactly these goals. Trade show visitors will find the following Rohde & Schwarz highlights and more in hall A1, booth 375 at Messe München.
Dec 17, 2020 | Press Release | Wireless communications
Rohde & Schwarz and IHP first to characterize D-band frequencies in over-the-air test setup for 6G and automotive radarAcademia and key industry players have identified the D-Band, ranging from 110 GHz to 170 GHz, as a candidate frequency band for beyond 5G and 6G mobile communications as well as for future automotive radar applications. Rohde & Schwarz continues its pioneering sub-THz research efforts with focus in this frequency range, reaching new milestones. In collaboration with IHP, Rohde & Schwarz has performed the industry’s first full 2D/3D antenna characterization of transceiver modules operating in the D-Band.
Jan 27, 2022 | Press Release | Test & measurement
Rohde & Schwarz furnishes EMC and radio labs of CSA Group′s new European headquarters with state-of-the-art T&M equipmentCSA Group, a global leader in testing, inspection and certification, has built a new European headquarters in Plattling in the State of Bavaria, Germany. As part of this project, CSA Group is considerably expanding its testing capabilities for German and European customers. For example, new test labs will enable a wide variety of product tests and certifications even of very large devices weighing up to 20 tonnes. The required test and measurement and amplifier equipment comes from EMC market leader Rohde & Schwarz.
Jun 11, 2024 | Press Release | Test & measurement
Rohde & Schwarz presents R&S RT-ZISO isolated probing system for precise measurements of fast switching signalsRohde & Schwarz has developed the R&S RT-ZISO isolated probing system, further elevating its cutting-edge oscilloscope portfolio. The new R&S RT-ZISO enables extremely accurate measurements of fast switching signals, especially in environments with high common-mode voltages and currents. Also new is the R&S RT-ZPMMCX passive probe with MMCX connector, which complements the isolated probe system perfectly for certain measurement tasks.
Jun 07, 2023 | Press Release | Test & measurement
Rohde & Schwarz presents first automated solution to speed up PCIe 5.0 and 6.0 cable and connector compliance testingFor precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specifications, Rohde & Schwarz is developing a new R&S ZNrun vector network analyzer automation suite option. For a fully automated verification of a PCIe x8 cable, for instance, the software controls a setup with R&S ZNB vector network analyzer plus scalable R&S OSP switch matrix configuration, creating a multiport VNA solution with 64 test ports. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs with all Thru and all crosstalk combinations plus corresponding metric calculations for Pass/Fail evaluations. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.
Feb 22, 2024 | Press Release | Non-terrestrial networks (NTN)
Rohde & Schwarz and MediaTek to showcase 5G NTN-NR Rel.17 connection at MWC 2024Rohde & Schwarz and MediaTek have teamed up to demonstrate a 5G non-terrestrial network (NTN) new radio (NR) connection based on the latest 3GPP Release 17 specifications. This technological advancement will be presented at this year's Mobile World Congress in Barcelona using the state-of-the-art R&S CMX500 one-box signaling tester (OBT) from Rohde & Schwarz and MediaTek's NTN-NR device as DUT. 5G NTN-NR is the next phase of NTN technology in which smartphones and other 5G devices will be directly linked with satellite-based services.
Dec 04, 2023 | Press Release | Wireless communications
Rohde & Schwarz is first to deliver a 5G FR1 A-GNSS OTA test solution approved by CTIA CertificationThe R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.
Jan 04, 2024 | Press Release | Automotive
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
Apr 23, 2024 | Press Release | Test & measurement
Rohde & Schwarz introduces new R&S SMB100B microwave signal generator for analog signal generation up to 40 GHzAvailable with four frequency options each covering from 8 kHz to 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz, the new R&S SMB100B microwave signal generator from Rohde & Schwarz brings excellent output power, spectral purity, very low close-in phase noise, and practically no wideband noise to analog microwave signal generation.
Nov 28, 2023 | Press Release | Wireless communications
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
Mar 05, 2024 | Press Release | EMC testing
Rohde & Schwarz at EMV 2024: Outstanding T&M solutions from the market leader in EMCAt the EMV show 2024 in Cologne, Rohde & Schwarz showcases a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. The company dedicates a large part of the booth to demonstrations that show EMI compliance testing, EMC test automation, EMS immunity test, EMI debugging and EMF. The Rohde & Schwarz solutions are on display from March 12 to 14, 2024 at the Cologne exhibition center, hall 11.1, booth 106.
Apr 04, 2024 | Press Release | Test & measurement
Rohde & Schwarz introduces new R&S NPA family of compact power analyzers for all power measurement requirementsA new family of Rohde & Schwarz power analyzers is now available in three models to meet all requirements for measuring voltage, current, power and total harmonic distortion on both DC and AC sources. The R&S NPA101 power meter provides all basic measurements, the R&S NPA501 power analyzer adds enhanced measurement functions and graphical analysis, and the R&S NPA701 compliance tester includes evaluation functions in line with IEC 62301 and EN 50564 for power consumption and EN 61000-3-2 for EMC harmonic emission testing.
Jun 05, 2023 | Press Release | Wireless communications
Rohde & Schwarz, Fujikura, and Avnet validate CATR OTA test systems for 5G mmWave phased array antenna R&D testingDesigning a 5G FR2 phased array antenna module (PAAM) requires over-the-air (OTA) testing to measure parameters like equivalent isotropic radiated power (EIRP) and effective isotropic sensitivity (EIS) in addition to traditional radiation patterns. Rohde & Schwarz has joined Fujikura and Avnet to validate their new development kit for 5G mmWave phased array antenna modules. The R&S ATS800B benchtop CATR OTA test system from Rohde & Schwarz is ideal for prototype testing in an open environment
Sep 03, 2024 | Press Release | Test & measurement
Rohde & Schwarz presents its top-notch RF and microwave test solutions at the EuMW 2024 in ParisPremier microwave, RF, wireless and radar players gather in the city of light for the European Microwave Week (EuMW). Industry-leading T&M specialist Rohde & Schwarz will present a radiating portfolio of products and solutions in Paris for various application fields, pushing the limits in the Gigahertz to Terahertz frequency ranges.
Feb 14, 2022 | Press Release | Test & measurement
Unlimited connectivity made real – Rohde & Schwarz exhibits its unique mobile test solutions at MWC Barcelona 2022Leveraging years of experience and exceptional insight in the entire mobile industry, Rohde & Schwarz is ready to present its comprehensive, leading-edge portfolio of mobile and wireless communications testing solutions at Mobile World Congress 2022 in Barcelona.
Jul 19, 2022 | Press Release | Test & measurement
Rohde & Schwarz announces on-wafer device characterization test solutionRohde & Schwarz now offers a test solution for full RF performance characterization of the DUT on-wafer which combines the powerful R&S ZNA vector network analyzer from Rohde & Schwarz with industry-leading engineering probe systems from FormFactor. As a result, semiconductor manufacturers can perform reliable and repeatable on-wafer device characterization in the development phase, during product qualification and in production.
Dec 08, 2021 | Press Release | Wireless communications
Sivers Semiconductors and Rohde & Schwarz collaborate on testing 5G RF transceivers up to 71 GHzAs 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.
Nov 08, 2021 | Press Release | Wireless communications
Rohde & Schwarz presents compact CATR based multireflector setup for RRM testing of 5G NR mmWave devicesWith the R&S ATS1800M, Rohde & Schwarz introduces an extension to the well-established R&S ATS1800C, a compact antenna test range (CATR) based 5G NR mmWave test chamber for over-the-air (OTA) testing. By adding two side chambers, the existing test chamber turns into the only single-system solution that enables full 3GPP-specified conformance testing of a 5G NR mmWave device for radio resource management (RRM), including multiple angles of arrival (AoA).
Feb 27, 2023 | Press Release | Wireless communications
Rohde & Schwarz verifies NTN capabilities of Bullitt’s smartphone, powered by MediaTek 3GPP Rel.17 chipsetRohde & Schwarz has partnered with Bullitt and MediaTek to fully test and verify the world’s first satellite-to-mobile messaging 5G smartphone in line with 3GPP Release 17. The groundbreaking test solution from Rohde & Schwarz verifies that SOS messaging and two-way messaging work reliably in no-coverage scenarios via non-terrestrial networks (NTN) in line with 3GPP. At MWC Barcelona, a test setup is showcased at the Rohde & Schwarz booth featuring a rugged 5G smartphone from Bullitt with integrated MediaTek 3GPP NTN Rel.17 chipset as DUT.
Oct 27, 2022 | Press Release | Test & measurement
HEAD acoustics relies on R&S CMX500 to accelerate testing of 5G NR voice service (VoNR)The voice and audio analysis expert HEAD acoustics has decided in favor of the 5G test solution from Rohde & Schwarz for verification of voice and audio services of 5G mobile devices. The upgraded R&S CMX500 5G one-box signaling tester features a significantly reduced footprint and easier handling combined with debugging and analysis capabilities, which support the end users’ testing of voice services.
Nov 15, 2022 | Press Release | Test & measurement
Enhanced R&S NRPxxP RF wideband power measurement sensor family with maximum frequency of 50 GHzUpgraded Rohde & Schwarz compact standalone wideband sensors for power measurements make up the R&S NRPxxP family. The R&S NRP50P is the latest model and engineers can now measure power levels from –60 dBm to +20 dBm at frequencies from 50 MHz to 50 GHz. The sensor is ideal for installing, maintaining and monitoring wireless communications systems.
Oct 13, 2020 | Press Release | Test & measurement
Rohde & Schwarz announces awards success with touch-operated analyzerThe R&S ZNA vector network analyzer is named the Test, Measurement & Inspection product of the year at the Electronics Industry Awards.
Sep 06, 2022 | Press Release | Test & measurement
From gigahertz to terahertz, Rohde & Schwarz exhibits latest mmWave test solutions at EuMW 2022 in MilanAfter 20 years, European Microwave Week – Europe's premier microwave, RF, wireless and radar event – is returning to Milan, Italy. At the event’s exhibition, test and measurement expert Rohde & Schwarz will showcase the company’s latest testing capabilities for microwave components with a special focus on new solutions for the road to 6G. Visitors will also learn about testing for automotive as well as aerospace and defense applications.