59 Resultados
R&S®RTO oscilloscopes combine excellent signal fidelity, up to 16-bit vertical resolution and high acquisition rate in a compact device format in the 600 MHz to 6 GHz class. They offer a fully integrated multi-domain test solution with frequency, protocol and logic analysis functions. The brilliant touchscreen makes the oscilloscopes very comfortable to use.
Sales – Easy triggering and decoding in one software option bundle.
R&S®RTO2000 Oscilloscope - Specifications Folletos y fichas técnicas Specifications
R&S®RTO2000 Turn your signals into success - Fact Sheet Folletos y fichas técnicas
Engineered for multidomain challenges. Discover the R&S®RTO2000 oscilloscope (600 MHz to 6 GHz) - Poster Folletos y fichas técnicas Poster
This document provide the technical specifications of the R&S®FSW-K144/-K145/-K147/-K147C /-K148/-K171/-K175, the R&S®FSV3-K144/-K145/-K147/-K147C/-K148/-K171/-K175, R&S®FPS-K144/-K148 and the R&S®VSE-K144/-K146/-K148/-K171/-K175
This white paper describes how a QAgent deployment might be handled to lessen the impact on production or lab environments.
R&S®RT-Zxx High Voltage and Current Probes - Specifications Folletos y fichas técnicas Specifications
Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the values are completely wrong. How can I get correct values? Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the
RTO2000 / RTP - La función táctil se pierde con el monitor externo RTO2000 / RTP - La función táctil se pierde con el monitor externo Al conectar un monitor adicional a través de la interfaz HDMI deja de funcionar la funcionalidad táctil. ¿Cómo puedo recuperar las funciones táctiles? RTO2000 / RTP - La función táctil se pierde con el monitor externo RTO2000 / RTP - La función táctil se pierde con el
RT-ZSxx: ¿más ruido con sondas activas? Sondas, reducción del ruido, RTM, RTA, RTE, RTO, RTP, RT-ZSxx He comparado sondas pasivas y activas. Parece que el ruido con las sondas activas es mayor. ¿Cuál es el motivo y qué puedo hacer para reducir el ruido? RT-ZSxx: ¿más ruido con sondas activas? Sondas, reducción del ruido, RTM, RTA, RTE, RTO, RTP, RT-ZSxx He comparado sondas pasivas y activas. Parece
Escalamiento de mediciones de frecuencia RTE, RTO, RTP en ciclos/min FAQ, RTO, RTE, RTP, Escalamiento de mediciones de frecuencia Escalamiento de mediciones de frecuencia RTE, RTO, RTP en ciclos/min Escalamiento de mediciones de frecuencia RTE, RTO, RTP en ciclos/min FAQ, RTO, RTE, RTP, Escalamiento de mediciones de frecuencia Escalamiento de mediciones de frecuencia RTE, RTO, RTP en ciclos/min Productos
Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other scopes. What is wrong here? Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other
Scope Suite Software: Can Ethernet compliance tests be done also with VNAs not from R&S RTO, RTP, Scope Suite Software For some tests a vector network analyzer is required. The Scope Suite software just supports VNAs from R&S to be connected via LAN for automated measurements. Can I use also other VNAs and do the measurement manually? Scope Suite Software: Can Ethernet compliance tests be done also
Llave necesaria para el FS-K96 FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO ¿Siempre se necesita una llave de licencia FSPC (1310.0002.03) para ejecutar el software FS-K96? Llave necesaria para el FS-K96 FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO ¿Siempre se necesita una llave de licencia FSPC (1310.0002.03) para ejecutar el software FS-K96? Productos relacionados
R&S Scope Suite - error en los ensayos de conformidad de eMMC Scope Suite, error en los ensayos de conformidad de eMMC, RTO, RTP R&S Scope Suite - error en los ensayos de conformidad de eMMC R&S Scope Suite - error en los ensayos de conformidad de eMMC Scope Suite, error en los ensayos de conformidad de eMMC, RTO, RTP R&S Scope Suite - error en los ensayos de conformidad de eMMC Productos relacionados
RTE/RTO/RTP - Wrong amplitude when digital filter is used RTE, RTO, RTP, amplitude, digital, signal, scale, waveform, vertical, frequency A sinus signal with i.e. 10 V peak-peak, frequency 1 MHz is applied. If I choose a vertical scale which is too small the peaks of the waveform are not displayed as they are out of range. Now I activate the digital filter in the “Vertical” menu à “Channel”. The frequency
Actualización de firmware de RTO / RTP de una versión anterior RTO, RTP, actualización de firmware Actualización de firmware de RTO / RTP de una versión anterior Actualización de firmware de RTO / RTP de una versión anterior RTO, RTP, actualización de firmware Actualización de firmware de RTO / RTP de una versión anterior Productos relacionados
Configuración de niveles de referencia en el RTO/RTP para medidas con el firmware versión 5 RTO, RTP, definición de nivel de referencia Configuración de niveles de referencia en el RTO/RTP para medidas con el firmware versión 5 Configuración de niveles de referencia en el RTO/RTP para medidas con el firmware versión 5 RTO, RTP, definición de nivel de referencia Configuración de niveles de referencia
WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. Related Products
RTE/RTO/RTP - Cargar un archivo de configuración con drivers Labview Preguntas frecuentes, RTE,RTO,RTP, Cargar un archivo de configuración con drivers de Labview RTE/RTO/RTP - Cargar un archivo de configuración con drivers Labview RTE/RTO/RTP - Cargar un archivo de configuración con drivers Labview Preguntas frecuentes, RTE,RTO,RTP, Cargar un archivo de configuración con drivers de Labview RTE/RTO/
La interfaz I/Q digital de RTO-K11 muestra «CF+BW/2 > DevBW» RTO-K11, interfaz I/Q digital, CF+BW/2, DevBW Al ajustar la frecuencia portadora y el ancho de banda de filtro se presenta la advertencia CF + BW/2 > DevBW. La interfaz I/Q digital de RTO-K11 muestra «CF+BW/2 > DevBW» RTO-K11, interfaz I/Q digital, CF+BW/2, DevBW Al ajustar la frecuencia portadora y el ancho de banda de filtro se presenta
RTE/RTO/RTP: ¿Cómo puedo calcular el tiempo ciego en el modo de ultrasegmentación? RTE, RTO, RTP, ultrasegmentación, tiempo ciego Utilizo el modo de ultrasegmentación para reducir al mínimo el tiempo ciego. Sin embargo, no hay una indicación. ¿Hay una forma de calcularlo? RTE/RTO/RTP: ¿Cómo puedo calcular el tiempo ciego en el modo de ultrasegmentación? RTE, RTO, RTP, ultrasegmentación, tiempo ciego
RTO/RTP - Zoom Windows does not show waveform data RTO, RTO6, RTP, Zoom window The Zoom function does not show any waveform data at specific settings, especially at slower timebases in combination with higher sample rates, High resolution and roll mode with more channels. The problem is gone if a lower sample rate is chosen. RTO/RTP - Zoom Windows does not show waveform data RTO, RTO6, RTP, Zoom window
RTE/RTO/RTP: Medida del nivel a una frecuencia designada en FFT con comandos de control remoto RTE, RTO, RTP, medida, frecuencia designada, FFT, comandos remotos RTE/RTO/RTP: Medida del nivel a una frecuencia designada en FFT con comandos de control remoto. RTE/RTO/RTP: Medida del nivel a una frecuencia designada en FFT con comandos de control remoto RTE, RTO, RTP, medida, frecuencia designada, FFT
Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite
Exportación de canales analógicos y digitales de la misma adquisición FAQ, RTE, RTO Exportación de canales analógicos y digitales de la misma adquisición Exportación de canales analógicos y digitales de la misma adquisición FAQ, RTE, RTO Exportación de canales analógicos y digitales de la misma adquisición Productos relacionados
RTE/RTO/RTP: Exportar el historial a un archivo con comandos de control remoto RTE, RTO, RTP, historial, exportar a un archivo RTE/RTO/RTP: Exportar el historial a un archivo mediante comandos de control remoto RTE/RTO/RTP: Exportar el historial a un archivo con comandos de control remoto RTE, RTO, RTP, historial, exportar a un archivo RTE/RTO/RTP: Exportar el historial a un archivo mediante comandos
Cambiar la impedancia de entrada con comandos SCPI Impedancia de entrada, 50 ohmios, 1 MOhmio, comando SCPI ¿Cómo puede cambiar entre la impedancia de entrada de 50 ohmios y 1 MOhmio utilizando comandos SCPI? Cambiar la impedancia de entrada con comandos SCPI Impedancia de entrada, 50 ohmios, 1 MOhmio, comando SCPI ¿Cómo puede cambiar entre la impedancia de entrada de 50 ohmios y 1 MOhmio utilizando
RTO/RTP further calculation of a measurement RTO, RTP, math, operations, measurement, frequency, cycles Is it possible to do math operations on a measurement? For example measure the frequency but display the result as cycles per minute? RTO/RTP further calculation of a measurement RTO, RTP, math, operations, measurement, frequency, cycles Is it possible to do math operations on a measurement? For
RTO - Export of waveform data into MATLAB RTO1000, RTO1002, RTO1004, RTO1012, RTO1014, RTO1022, RTO1024, RTO1044, RTO2000, RTO2002, RTO2012, RTO2022, RTO2032, RTO2004, RTO2014, RTO2024, RTO2034, RTO2044, RTO2064 I want to export the waveform data of my RTO scope into MATLAB, but the only way I found so far is the screenshot option. Is there another way to use the trace data in my script? RTO - Export
Ajuste de volumen del «pitido» FAQ, RTO, RTE, RTP Ajuste de volumen del «pitido» Ajuste de volumen del «pitido» FAQ, RTO, RTE, RTP Ajuste de volumen del «pitido» Productos relacionados
RTE/RTO/RTP: El zoom muestra efectos de sobreoscilación RTE, RTO, RTP, zoom Cuando uso la función de zoom para observar el flanco ascendente de una señal rectangular aprecio una sobreoscilación que no es real, véase la captura de pantalla. ¿Cuál es el motivo? RTE/RTO/RTP: El zoom muestra efectos de sobreoscilación RTE, RTO, RTP, zoom Cuando uso la función de zoom para observar el flanco ascendente
Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Related Products
Ejemplos de programación para osciloscopios Ejemplos de programación, osciloscopios, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6, RTP Ejemplos de programación para osciloscopios. Ejemplos de programación para osciloscopios Ejemplos de programación, osciloscopios, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO
El interruptor de circuito de fuga se dispara cuando se conecta la sonda a la línea principal RTC, RTB, RTM, RTA, RTE, RTO, interruptor de fuga Queremos medir la tensión de la línea principal con nuestro osciloscopio. El interruptor de circuito de fuga se dispara cuando se conecta la sonda a la línea principal RTC, RTB, RTM, RTA, RTE, RTO, interruptor de fuga Queremos medir la tensión de la línea principal
Conexión de dispositivo examinado y colateral de enlace con adaptador de fijación RT-ZF2 RTO, RTP, RT-ZF2 Conexión de dispositivo examinado y colateral de enlace con adaptador de fijación RT-ZF2 Conexión de dispositivo examinado y colateral de enlace con adaptador de fijación RT-ZF2 RTO, RTP, RT-ZF2 Conexión de dispositivo examinado y colateral de enlace con adaptador de fijación RT-ZF2 Productos relacionados
R&S Scope Suite - Error communicating with oscilloscope Scope Suite, RTO2000, Error, communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope Scope Suite, RTO2000, Error, communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope Related Products
Número de armónicos en la opción de potencia del RTE/RTO Número de armónicos en la opción de potencia del RTE/RTO Número de armónicos, RTE, RTO, opción de potencia, FAQ Número de armónicos en la opción de potencia del RTE/RTO Número de armónicos en la opción de potencia del RTE/RTO Número de armónicos, RTE, RTO, opción de potencia, FAQ Productos relacionados
Interfaz I/Q digital de RTO/RTP-K11: archivo de comandos de muestra para configuración y consulta de datos RTO, RTP-K11, interfaz I/Q digital, archivo de comandos de muestra, configuración, consulta de datos Secuencia SCPI para la configuración y consulta de datos para la opción de interfaz I/Q digital K11. Interfaz I/Q digital de RTO/RTP-K11: archivo de comandos de muestra para configuración y consulta
Falla la conexión de R&S ScopeSuite con RTO/RTP FAQ, RTO, RTE, Scope suite Falla la conexión de R&S®ScopeSuite con RTO/RTP Falla la conexión de R&S ScopeSuite con RTO/RTP FAQ, RTO, RTE, Scope suite Falla la conexión de R&S®ScopeSuite con RTO/RTP Productos relacionados
Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Related Products
Recuperación del inicio de sesión automático en RTE/RTO/RTP RTE, RTO, RTP, inicio de sesión automático Al iniciar el RTE/RTO/RTP, Windows solicita el usuario y la contraseña. ¿Cómo puedo recuperar la función de inicio de sesión automático? Recuperación del inicio de sesión automático en RTE/RTO/RTP RTE, RTO, RTP, inicio de sesión automático Al iniciar el RTE/RTO/RTP, Windows solicita el usuario y la
T&M solution guide for network infrastructure equipment providers
Automotive Ethernet ECU Test Specifications Test Tool Package for Layer 1 to 7
Test applications for oscilloscopes range from debugging complex electronic circuits to measuring the signal integrity of high-speed bus signals and characterizing power electronics with dangerous voltage levels. Measurement accuracy and operator safety depend on the probes and accessories that are used.
Test fixture sets made by Rohde & Schwarz
The different interface standards define the connection between the measuring equipment and the device under test. Rohde & Schwarz offers the required test fixture sets.
In pursuit of developing standardized testing methodology in electronics development, the HORYZN team at the Technical University of Munich integrated the R&S®RTO (with the R&S®RT-ZPR20 power rail probe) from Rohde & Schwarz into their prototyping design-loop and workflow.
Addressing high-speed probing challenges with the R&S®RT-ZM modular probe system
Oscilloscope innovation. Measurement confidence. - Poster Folletos y fichas técnicas Poster
The healthcare sector has adopted many existing and emerging technologies for a wide range of applications. Performance degradation or failure of medical devices and test systems can have severe consequences. As a leader in test and measurement, Rohde & Schwarz partners closely with our customers at every stage of development and deployment. We can help define your testing needs and bring your products to market as quickly as possible – with the required quality and performance. We offer solutions that cover all your medical and health application requirements. Our comprehensive product portfolio has the right test and measurement solutions for your application and budget.
Standard probes for R&S®RTC1000, R&S®RTB2000, R&S®RTM3000, R&S®MXO 4, R&S®RTE, R&S®RTO, R&S®RTP, R&S®RTH oscilloscopes
This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.
❙ Electronic design
❙ Test and measurement solutions
We propose a joint jitter and noise analysis framework for serial PAM transmission based on a parametric signal model. Our approach has several benefits over state-of-the-art methods. First, we provide additional measurements. Second, we require shorter signal lengths for the same accuracy. Finally, our method does not rely on specific symbol sequences. In this paper, we show example measurement results as well as comparisons with state-of-the-art methods.