Key Facts
The state-of-the-art R&S®SMBV100B vector signal generator sets standards for its class. Ultra high output power, fully calibrated wideband signal generation and intuitive touchscreen operation make the R&S®SMBV100B ideal for all kinds of applications.
Always in line with the latest major digital communications standards, such as 5G NR, LTE and WLAN, the SMBV100B is the preferred test solution for receiver and component characterization.
The R&S®SMBV100B has many GNSS options that transform the instrument into a reliable, full-featured GNSS simulator. Advanced simulation capabilities can run realistic and complex yet repeatable GNSS scenarios under controlled conditions.
Measured EVM performance vs. Level
Measured EVM performance vs. RMS level (R&S®SMBV100B equipped with R&S®SMBVB-K31 and R&S®SMBVB-B32 options).
To meet demand for higher modulation bandwidths, the R&S®SMBV100B comes with a high performance baseband. The intelligent internal real-time frequency response correction in the generator enables extremely high amplitude flatness of < 0.3 dB (measured) across the entire bandwidth of 1 GHz.
Measured frequency response
Measured frequency response across maximum RF modulation bandwidth of 500 MHz at different carrier frequencies
Ultra high output power and excellent level accuracy
When equipped with the appropriate options, the R&S®SMBV100B can produce output power of up to +34 dBm (measured at 1 GHz) and the specified level increases to +25 dBm across almost the entire frequency range.
After calibration, the generator must repeatably and precisely set level values for each test sequence. Here, the R&S®SMBV100B delivers top performance with a measured level repeatability of < 0.09 dB.
Maximum output power (measured)
Measured output power for base unit with high power option (R&S®SMBVB-K31) and additional ultra-high-power option (R&S®SMBVB-B32).
The R&S®SMBV100B has several GNSS options that transform the instrument into a reliable, full-featured GNSS simulator. Advanced simulation capabilities can run realistic and complex yet repeatable GNSS scenarios under controlled conditions. This includes realistic modeling of GNSS orbits, signal propagation effects and system errors as well as realistic modeling of the user environment.
Simulation of a combined GPS/GLONASS/BeiDou/Galileo constellation for a moving GNSS user
The intuitive operating concept makes the R&S®SMBV100B very ergonomic and practical. The customizable instrument is also ready for future requirements.
SMBV100B user interface
R&S®SMBV100B can be tailored to specific needs at any time
Configuring the instrument hardware requires just a few decisions. Six hardware options are available. Software options can be added on site at the customer facilities with keycodes.
The instrument comes fully calibrated at the factory. No downtime is needed for servicing after upgrades to extend frequency range, bandwidth or output power.
Overview of important software and hardware options
Replace your legacy signal generators: emulate generators from Rohde & Schwarz and other vendors (e.g. R&S®SMBV100A, Keysight MXG/EXG, Aeroflex and Anritsu)
Order Number 1423.6270.02
8 kHz to 3 GHz (mandatory)
Order Number 1423.6370.02
Frequency Extension to 6 GHz
Order Number 1423.6470.02
OCXO Reference Oscillator
Order Number 1423.6570.02
High Performance OCXO Reference Oscillator
Order Number 1423.7260.02
1 GHz Reference Input/Output
Order Number 1423.7618.02
Flexible Reference Input from 1 MHz to 100 MHz
Order Number 1423.7560.02
Pulse Modulator
Order Number 1423.7576.02
Pulse Generator
Order Number 1423.9279.02
Pulse train
Order Number 1423.7582.02
Multifunction Generator
Order Number 1423.7599.02
AM/FM/φM
Order Number 1423.6670.02
High Output Power
Order Number 1423.6711.02
Ultra High Output Power
Order Number 1423.7601.02
Phase coherence
Order Number 1423.7360.02
Rear Panel Connector for RF Path
Order Number 1423.7624.02
Differential Analog I/Q Outputs
Order Number 1423.7630.02
Digital baseband output
Order Number 1423.7653.02
ARB Memory Extension to 512 Msample
Order Number 1423.7660.02
ARB Memory Extension to 1 Gsample
Order Number 1423.8589.02
ARB Memory Extension to 2 Gsample
Order Number 1423.7676.02
Baseband Realtime Extension
Order Number 1423.7682.02
Baseband Extension to 240 MHz RF bandwidth
Order Number 1423.7699.02
Baseband Extension to 500 MHz RF bandwidth
Order Number 1423.8920.02
Baseband Extension to 1 GHz RF bandwidth
Order Number 1423.7647.02
Bit Error Rate Tester
Order Number 1423.7701.02
Envelope Tracking
Order Number 1423.7718.02
AM/AM, AM/φM Predistortion
Order Number 1423.8150.02
User-Defined Frequency Response Correction
Order Number 1423.8820.02
Crest factor reduction
Order Number 1423.8608.02
5G NR Release 15
Order Number 1423.8843.02
5G NR Release 16
Order Number 1423.9085.02
5G NR Release 17/18
Order Number 1423.7830.02
LTE Release 8
Order Number 1423.7901.02
LTE Release 9
Order Number 1423.7918.02
LTE Release 10
Order Number 1423.8037.02
LTE Release 11
Order Number 1423.8043.02
LTE Release 12
Order Number 1423.8108.02
LTE Release 13/14/15
Order Number 1423.8989.02
U-Plane generation
Order Number 1423.8066.02
Cellular IoT Release 13
Order Number 1423.8637.02
Cellular IoT Release 14
Order Number 1423.8808.02
Cellular IoT Release 15
Order Number 1423.7747.02
3GPP FDD
Order Number 1423.7899.02
3GPP FDD HSPA/HSPA+, Enhanced BS/MS Tests
Order Number 1423.7724.02
GSM/EDGE
Order Number 1423.7730.02
EDGE Evolution
Order Number 1423.7760.02
CDMA2000 inkl. 1xEV-DV
Order Number 1423.7776.02
1xEV-DO Rev. A
Order Number 1423.7930.02
1xEV-DO Rev. B
Order Number 1423.7782.02
TD-SCDMA
Order Number 1423.7799.02
TD-SCDMA Enhanced BS/MS Tests
Order Number 1423.8614.02
5G NR Release 15 (WinIQSIM2™)
Order Number 1423.8272.02
LTE Release 8 (WinIQSIM2™)
Order Number 1423.8343.02
LTE Release 9 (WinIQSIM2™)
Order Number 1423.8350.02
LTE Release 10 (WinIQSIM2™)
Order Number 1423.8495.02
LTE Release 11 (WinIQSIM2™)
Order Number 1423.8508.02
LTE Release 12 (WinIQSIM2™)
Order Number 1423.8550.02
LTE Release 13/14/15 (WinIQSIM2™)
Order Number 1423.8514.02
Cellular IoT Release 13 (WinIQSIM2™)
Order Number 1423.8643.02
Cellular IoT Release 14 (WinIQSIM2™)
Order Number 1423.8814.02
Cellular IoT Release 15 (WinIQSIM2™)
Order Number 1423.8189.02
3GPP FDD (WinIQSIM2™)
Order Number 1423.8337.02
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Order Number 1423.8166.02
GSM/EDGE (WinIQSIM2™)
Order Number 1423.8172.02
EDGE Evolution (WinIQSIM2™)
Order Number 1423.8208.02
CDMA2000 inkl. 1xEV-DV (WinIQSIM2™)
Order Number 1423.8214.02
1xEV-DO Rev. A (WinIQSIM2™)
Order Number 1423.8372.02
1xEV-DO Rev. B (WinIQSIM2™)
Order Number 1423.8220.02
TD-SCDMA (WinIQSIM2™)
Order Number 1423.8237.02
TD-SCDMA Enhanced BS/MS Tests (WinIQSIM2™)
Order Number 1423.8543.02
Verizon 5GTF Signals (WinIQSIM2™)
Order Number 1423.7824.02
IEEE 802.11a/b/g/n/j/p
Order Number 1423.7924.02
IEEE 802.11ac
Order Number 1423.8114.02
IEEE 802.11ax
Order Number 1423.8950.02
IEEE 802.11be
Order Number 1423.8443.02
DFS signal generation (option for R&S®Pulse Sequencer software DFS)
Software option for standard-compliant dynamic frequency selection radar profiles.
Order Number 1423.7853.02
Bluetooth® EDR
Order Number 1423.8089.02
Bluetooth® 5.x
Order Number 1423.7947.02
NFC A/B/F
Order Number 1423.8720.02
LORA
Order Number 1423.8889.02
HRP UWB
Order Number 1423.8050.02
OFDM Signal Generation
Order Number 1423.8266.02
802.11a/b/g/n/j/p (WinIQSIM2™)
Order Number 1423.8366.02
IEEE 802.11ac (WinIQSIM2™)
Order Number 1423.8566.02
IEEE 802.11ax (WinIQSIM2™)
Order Number 1423.8966.02
IEEE 802.11be (WinIQSIM2™)
Order Number 1423.8295.02
Bluetooth® EDR (WinIQSIM2™)
Order Number 1423.8537.02
Bluetooth® 5.x (WinIQSIM2™)
Order Number 1423.8389.02
NFC A/B/F (WinIQSIM2™)
Order Number 1423.8737.02
LORA (WinIQSIM2)
Order Number 1423.8895.02
HRP UWB (WinIQSIM2™)
Order Number 1423.8595.02
OFDM Signal Generation (WinIQSIM2™)
Order Number 1423.7753.02
GPS
Adds L1 C/A, L2 C/A, L1P, L2P
Order Number 1423.7960.02
Modernized GPS
Adds L2C, L5
Order Number 1423.7882.02
Galileo
Adds E1 OS, E5a/E5b
Order Number 1423.7953.02
Glonass
Adds G1 SPS, G2 SPS
Order Number 1423.8708.02
NavIC/IRNSS
Adds NavIC L5
Order Number 1423.7982.02
SBAS/QZSS
Adds QZSS, EGNOS, WAAS, MSAS and GAGAN
Order Number 1423.8008.02
Real World Scenarios
Adds obscuration, multipath, antenna patterns
Order Number 1423.8014.02
Real time GNSS interfaces
Adds HiL/ViL integration capabilities
Order Number 1423.8789.02
Modernized Beidou
Adds B1c, B2a, B3I
Order Number 1423.8743.02
Single-Satellite GNSS
GNSS production testing, 1 satellite per system
Order Number 1423.8750.02
Upgrade to Dual-Frequency GNSS
Adds combined L1/L2, L1/L5 or L2/L5 scenarios
Order Number 1423.8766.02
Upgrade to Triple-Frequency GNSS
Adds combined L1/L2/L5 scenarios
Order Number 1423.8772.02
Add 6 GNSS channels
Adds GNSS channels to the instrument
Order Number 1423.8795.02
Add 12 GNSS channels
Adds GNSS channels to the instrument
Order Number 1423.8650.02
eraGlonass Test Suite
According to GOST-R-55534/33471
Order Number 1423.8666.02
eCall Test Suite
According to EU2017/79, Annex VI and UNECE 2016/07
Order Number 1423.8672.02
GNSS Test Suite
Order Number 1423.9285.02
Car navigation test suite
Order Number 1423.8195.02
GPS, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1423.8408.02
Modernized GPS, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1423.8320.02
Galileo, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1423.8395.02
Glonass, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1423.8489.02
BeiDou, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1423.8837.02
Modernized Beidou (WinIQSIM2™)
Single-satellite waveform
Order Number 1423.8695.02
NavIC / IRNSS, 1 satellite (WinIQSIM2)
Order Number 1423.8020.02
GBAS
Order Number 1423.8120.02
ILS
Order Number 1423.8137.02
VOR
Order Number 1423.8143.02
DME
Order Number 1423.8414.02
Pulse sequencing (option for R&S®Pulse Sequencer software)
Basic feature set for simulating radar signals with R&S®Pulse Sequencer software on an external PC
Order Number 1423.8420.02
Enhanced pulse sequencing (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for emitters and receiver including antenna patterns and antenna scans
Order Number 1423.8437.02
Direction finding (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for angle of arrival (AoA)
Order Number 1423.8243.02
DVB-H / DVB-T (WinIQSIM2™)
Order Number 1423.8250.02
SMBVB-K253 DAB/T-DMB (WinIQSIM2™)
Order Number 1423.8520.02
DVB-S2/DVB-S2X (WinIQSIM2™)
Order Number 1423.9262.02
DVB-RCS2 (WinIQSIM2™)
Order Number 1423.9256.02
DVB-S2X-E (WinIQSIM2™)
Order Number 1423.8714.71
1 waveform for signals from R&S®WinIQSIM2™, R&S®Pulse Sequencer, R&S®Pulse Sequencer (DFS)
Order Number 1423.8714.72
5 waveform for signals from R&S®WinIQSIM2™, R&S®Pulse Sequencer, R&S®Pulse Sequencer (DFS)
Order Number 1423.8714.75
50 waveform for signals from R&S®WinIQSIM2™, R&S®Pulse Sequencer, R&S®Pulse Sequencer (DFS)
Order Number 1423.7860.02
Multicarrier CW Signal Generation
Order Number 1423.7876.02
Additive White Gaussian Noise (AWGN)
Order Number 1423.8972.02
Notched Signals
Order Number 1423.8308.02
Multicarrier CW Signal Generation (WinIQSIM2™)
Order Number 1423.8314.02
Additive White Gaussian Noise (AWGN) with WinIQSIM2™
Order Number 1177.8090.00
19” Rack Adapter
Order Number 6124.2531.00
USB serial adapter for RS-232 remote control
Order Number 3639.9910.02
Spare CFAST Card
Order Number 1423.7160.02
Removable Mass Storage
Order Number 1423.8872.02
HUMS
Health and Utilization Monitoring Service
Order Number 0240.2193.18
Documentation of Calibration Values
Order Number 1423.8620.02
R&S®SMBV100B Accredited Calibration (ISO 17025, ISO 9000)
Productos relacionados
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz
1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).
2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.
3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.
4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.
5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:
Premio: 1 osciloscopio digital R&S®RTB2000
6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.
7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.
8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.
9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.
10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.
11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.
12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.
13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
