26 結果
ローデ・シュワルツの計測器用の汎用ソフトウェアツールRSCommanderは、ローデ・シュワルツのスペクトラム・アナライザ、ネットワーク・アナライザ、信号発生器、オシロスコープなどの幅広い計測器用の汎用ソフトウェアツールです。これにより、計測器の自動検出、スクリーンショットの作成、トレースの読み込み、ファイルの転送、簡単なスクリプトの作成を行うことができます。
12月 24, 2017 | AN 番号 1MA074
このアプリケーションノートでは、MathWorksのMATLABからローデ・シュワルツの測定器をリモート制御するための2種類の手法について概要を説明します。第1の手法では、VISA接続とSCPIダイレクトコマンドを使用します。第2の手法では、ローデ・シュワルツのVXIプラグ&プレイ測定器ドライバーとMATLAB Instrument Control Toolboxを利用します。
6月 12, 2017 | AN 番号 1MA171
3GPP TS36.141では、EUTRA基地局(eNodeB)のコンフォーマンステストが定義されています。リリース14では、特にeLAA(enhanced Licensed Assisted Accsess)用のテストがいくつか追加されました。このアプリケーションノートでは、ローデ・シュワルツのシグナル・スペクトラム・アナライザを使用して、必要なすべてのトランスミッター(Tx)テスト(TS36.141第6章)を短時間で簡単に実行する方法を紹介します。一部のテストでは、ローデ・シュワルツの信号発生器が追加で必要になります。手動操作の例を示しています。無償のソフトウェアプログラムによって、リモート操作のデモが可能です。LTE基地局レシーバー(Rx)テスト(TS36.141第7章)については、アプリケーションノート(1MA195)で説明します。LTE基地局性能(Px)テスト(TS36.141第8章)については、アプリケーションノート(1MA162)で説明します。
5月 11, 2016 | AN 番号 1MA154
R&S®SMW200A 信号発生器のベースバンドによるフェージングは、あらゆるモバイル無線規格のテストに対して十分に実証済みであり、広く受け入れられています。しかし、一部のアプリケーションでは、RF信号にフェージングをかける必要があります。R&S®FSW、R&S®FSQ、R&S®FSG、R&S®FSV シグナル・アナライザにデジタル・ベースバンド・インタフェースを搭載するか、またはデジタルベースバンド入力オプションとフェージングシミュレータ・オプションを搭載したR&S®TSMW/R&S®IQRおよびR&S®SMU 信号発生器を組み合わせることで、汎用RFフェージングシミュレータを容易に構築することができます。以下のノートでは、その構築方法を説明します。
2月 27, 2015 | AN 番号 1MA145
マルチ入力マルチ出力(MIMO)はLTEに不可欠です。ローデ・シュワルツのベクトル信号発生器、シグナル・アナライザ、スペクトラム・アナライザは、最大4つのアンテナのLTE測定をサポートします。このアプリケーションノートでは、LTEダウンリンクの2×2 MIMOに焦点を当てます。無料プログラムのR&S®Forumを使用したリモート制御プログラミングの例も紹介します。
10月 09, 2014 | AN 番号 1MA143
LTE-Advancedには、3GPPリリース8で最初に指定された基本的なLTEテクノロジーを強化する複数の機能が含まれています。LTE-Advancedの改善点を含むLTEはIMT-Advancedの要件に準拠していることがITUによって承認され、これによりLTEは真の4Gモバイル通信システムになりました。LTE-Advancedの各種テクノロジー要素は、それぞれ市場優先度が異なるため、必要なテスト戦略も異なります。このアプリケーションノートでは、ローデ・シュワルツのベクトル信号発生器、シグナル/スペクトラム・アナライザ、ワイドバンド無線機テスタを使用したLTE-Advanced(リリース10)テストソリューションを紹介します。
9月 03, 2014 | AN 番号 1MA166
IQWizardは、さまざまなフォーマットのIQ信号ファイルをロードし、FSxスペクトラム・アナライザまたはESxレシーバーを使ってIQ信号を測定するためのツールです。メモリに取得したIQデータは、各種フォーマットで保存するか、WinIQSIM™またはWinIQSIM2™をインストールしたR&S®ベクトル信号発生器に送信できます。
4月 26, 2013 | AN 番号 1MA028
急成長中のモバイル無線規格であるLTEは、3GPPリリース8から始まりました。リリース9では、初めての改良と新機能の追加が行われました。このアプリケーション・ノートでは、ローデ・シュワルツの測定器を使用したLTEリリース9の機能の電子計測方法について説明します。
4月 26, 2013 | AN 番号 1MA210
Multiple input multiple output (MIMO) technology is an integral part of 3GPP E-UTRA long term evolution (LTE). As part of MIMO, beamforming is also used in LTE. This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.
Apr 26, 2013 | AN 番号 1MA187
The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.
Jan 01, 2013 | AN 番号 1MA153
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
Dec 20, 2012 | AN 番号 1MA035
This white paper introduces a novel attribute based architecture for VXIplug&play instrument drivers. The presented architecture uses the attribute based concept of IVI-C instrument drivers to introduce a two-layer design for VXIplug&play instrument drivers. Moreover the use of attributes is shown for the Rohde & Schwarz Spectrum Analyzer (rsspecan) instrument driver.
Dec 01, 2012 | AN 番号 1MA170
This white paper provides a brief technology introduction on the 802.11ac amendment to the successful 802.11-2007 standard. 802.11ac provides mechanisms to increase throughput and user experience of existing WLAN and will build on 802.11n-2009.
May 23, 2012 | AN 番号 1MA192
This application note provides a guide through the measurements for IEEE 802.11ac WLAN transmitter signals using the general purpose OFDM analysis software R&S FS-K96. Step-by-step instructions for performing the measurements are provided and the different result types available with the FSK96 Software are discussed.
Sep 22, 2011 | AN 番号 1EF82
既存のGSMモバイル通信システムでは、3GPP(3rd Generation Partnership Project)のGERAN(GSM/EDGE Radio Access Network)リリース9仕様で規定されたVAMOS(Voice services over Adaptive Multi-user channels on One Slot)機能を追加することで、音声容量を倍増させることができます。このアプリケーション・ノートでは、エア・インタフェースの観点からVAMOS機能について詳しく説明します。また、ローデ・シュワルツのテスト機器で提供されるVAMOSテスト・ソリューションについても具体的に説明します。
8月 17, 2011 | AN 番号 1MA181
Verification of baseband data is an important step in the early development phase of LTE/LTE-A-ready products. Comparison values for baseband data (test vectors) from other sources can be very useful in order to verify the correct implementation of the standard. Option K81 for the R&S®SMx200A vector signal generator offers sample data for LTE at the bit level. The reference data enables users to test their own implementation of the specification. The LTE bit stream verification program shown here uses data generated by this option and offers a (bitwise) comparison with bit streams generated for an LTE downlink signal. Therefore it demonstrates, how easy the option R&S SMx-K81 can be integrated into the simulation and design process during the development of LTE/LTE-A handsets or base stations.
Feb 02, 2011 | AN 番号 1MA161
このアプリケーション・ノートでは、ローデ・シュワルツのスペクトラム・アナライザ、ローデ・シュワルツの信号発生器、およびR&S FS-Z10 コヒーレンス・ユニットを使用して、2つのRF信号間のコヒーレンス(位相差、タイミング差、利得差)を測定する方法について説明します。
9月 28, 2010 | AN 番号 1EF70
このアプリケーション・ノートでは、GPIBまたはLANインタフェースを介してR&S®電子計測器製品とAWR® Visual System Simulator™(VSS)とをすばやくシームレスに接続する方法について説明します。ローデ・シュワルツのハードウェア用にカスタマイズされたAWR® Connected™とR&S® WinIQSIM2™ 信号シミュレーション・ソフトウェアを使用して、デジタルラジオ規格の柔軟性に注目して、VSSとの統合方法を示します。
5月 20, 2010 | AN 番号 1MA174
This application note explains how to create screenshots of Rohde & Schwarz instruments using instrument drivers. The presented examples are written in C (LabWindows/CVI), C# programming language and LabVIEW. The examples are available at the instrument driver download site.
Dec 11, 2009 | AN 番号 1MA160
This application note explains the fundamentals of the cell search and cell selection and reselection procedures required for both modes of UMTS Long Term Evolution: FDD and TDD. It describes how to generate and analyze the required signals using Rohde & Schwarz test and measurement solutions. The application note also shows how to perform interoperability tests and terminal conformance tests according to the baseline of the 3GPP specifications for protocol conformance and Radio Resource Management (RRM).
Sep 17, 2009 | AN 番号 1MA150
Modern radio communication systems have to provide higher and higher data rates. As conventional methods like using more bandwidth or higher order modulation types are limited, new methods of using the transmission channel have to be used. Multiple antenna systems (Multiple Input, Multiple Output – MIMO) gives a significant enhancement to data rate and channel capacity. This application note gives an introduction to basic MIMO concepts and terminology and explains how MIMO is implemented in different radio communications standards.
Jul 02, 2009 | AN 番号 1MA142
このアプリケーションノートでは、R&S FSQ-K96 OFDM測定ソフトウェアの操作について説明します。アプリケーション、セットアップ、機能、設定、および結果を紹介します。さらに、R&S FSQ-K96用の設定ファイル、R&S FSQ シグナル・アナライザ用の適切なIQデータファイル、R&S 信号発生器用の波形ファイルの作成に焦点を当てます。こちらの説明により、ユーザーは、汎用OFDM信号のための信号発生および信号解析用のR&S テストソリューションを実現することができます。
10月 17, 2008 | AN 番号 1EF65
近接型ICカード(PICC)により放出される電磁妨害(EMD)は、不要な負荷変調です。このアプリケーション・ノートでは、ベクトル信号解析を使用してデータ伝送時のEMDを測定する方法について説明します。
10月 19, 2007 | AN 番号 1MA120