8327 結果
送信機へのDVB-T2信号供給にエラーがあると、DVB-T2ネットワーク全体に障害が起きる可能性があります。このため、策定済みのETSI TR 101 290 DVB測定ガイドラインが拡張され、新しいT2-MIインタフェースの測定が追加されました。R&S DVMSシリーズの測定器では、これらの新たに定義された測定を行ってT2-MI信号をモニタリングできます。また、これらの信号の詳細な解析も可能です。
9月 01, 2011
How to configure generic devices in R&S®ELEKTRA
Configuration of generic drivers to implement third-party devices
May 04, 2023 | AN 番号 1SL398
R&S®ZNA ベクトル・ネットワーク・アナライザは優れたダイナミックレンジを提供して、これまでベクトル・ネットワーク・アナライザでは対応できなかった潜在的なアプリケーションの可能性を引き出します。
1月 07, 2019
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
May 04, 2023 | AN 番号 1SL396
このドキュメントでは、R&S®RTOとR&S®RTPを使用して、RFパルスを復調して詳細な測定を実行する方法と、RFパルスに対する精密なトリガと解析を実行する方法について説明します。
3月 13, 2019
このアプリケーションノートでは、付属のソフトウェアツールを使用して、さまざまなRohde&Schwarz I/Qファイルフォーマットを相互に変換する方法を説明します。
9月 23, 2015 | AN 番号 1EF85
ローデ・シュワルツは、すべてのチャネルの状態や測定値の概要を把握するために、すべての測定器とチャネルを1つのインタフェースから設定するツールを提供しています。
4月 28, 2023
R&S®AREG100Aは、干渉源に対するレーダーセンサのイミュニティーをテストするための強力なソリューションです。
8月 14, 2018
このアプリケーションノートでは、R&S®ELEKTRA EMCテストソフトウェアとR&S®AdVISE 目視検査ソフトウェアをリモートテスト用に設定する手順を説明します。
7月 23, 2020 | AN 番号 1S005
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB 3.2 Legacy Cable Testing for USB Type A, Type B, and Micro family connector types. Based on 5 Gbps and 10 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
Nov 09, 2023 | AN 番号 1SL408
R&S®VSEは、ローデ・シュワルツ製オシロスコープの高度なトリガシステムをすべてサポートし、さまざまな信号を包括的に解析できる強力なツールです。
2月 03, 2021
R&S VCS-4G for simulator and training systems.
Jun 18, 2013
ローデ・シュワルツのハンドヘルドソリューションは、ゲートトリガをサポートするので、アップリンクとダウンリンクの信号をタイムドメインで分離できます。
4月 09, 2019