8304 結果
このアプリケーションノートでは、R&S®パルス・シーケンサ・ソフトウェアを紹介し、現実的なRF信号環境を作成するために必要な手順の概要を説明します。
1月 17, 2017 | AN 番号 1MA288
補助機能から発生するエミッションは頻度が少ない場合があり、根本原因の発見と特定が困難になります。発生頻度の少ないイベントを効率的に発見するには、超高速のFFT解析機能を備えた測定器が不可欠です。
3月 03, 2023
このアプリケーションノートでは、R&S®ESW EMIテストレシーバーに関連する、RF信号経路の特性と実装、イメージ応答などのトピックについて説明します。
11月 19, 2020 | AN 番号 1EE26
このアプリケーションノートでは、スペクトラム・アナライザでRBWフィルターを使用してパルスド信号のスペクトラムエミッション測定を実行する方法に関する情報を提供します。
6月 06, 2019 | AN 番号 1EF106
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
Aug 31, 2023 | AN 番号 1GP141
SITLine ETH:ファイル/コンテンツアプリケーションのための非常にセキュアなデータセンターへの接続
1月 27, 2014
開発者は、R&S®RTO2000 マルチドメインオシロスコープを使用して、必要なすべての測定にオシロスコープを使用できるようになりました。
7月 16, 2018
この問題の解決には、大容量のセグメントメモリと専用のトリガ条件により、長時間休止することなく、関連するシーケンスを捕捉できる機能が最適です。
12月 01, 2017
How to configure generic devices in R&S®ELEKTRA
Configuration of generic drivers to implement third-party devices
May 04, 2023 | AN 番号 1SL398
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
May 17, 2023 | AN 番号 1SL386
R&S®SMU200A 信号発生器を使用した3GPP FDDおよびLTEマルチセルおよびマルチUEシナリオ
8月 10, 2011 | AN 番号 1GP80
このアプリケーションノートでは、さまざまなタイプのテスト・ポート・アダプターとそのパラメータ、互換性、および使用方法について説明します。
4月 28, 2015 | AN 番号 1MA100
R&S®ZNA ベクトル・ネットワーク・アナライザは優れたダイナミックレンジを提供して、これまでベクトル・ネットワーク・アナライザでは対応できなかった潜在的なアプリケーションの可能性を引き出します。
1月 07, 2019
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
May 04, 2023 | AN 番号 1SL396