5G mobile network testing using a passive network scanner (Part 4)

November 1, 2022 | by Corbett Rowell

Network Synchronization of 5G networks

The last blog post (Part 3) examined the first challenge of how you can measure and analyze 5G networks passively by analyzing synchronization and broadcast signals. In this article we address the challenge of timing alignment between 5G base stations as this has a large effect on inter-cell interference and consequently user experience.

Read more

5G mobile network testing using a passive network scanner (Part 3)

September 9, 2022 | by Corbett Rowell

How to measure 5G networks?

The last blog post (Part 2) explained the technical background and the setup of the measurements in FR1 and FR2. In this article we discuss how you can measure and analyze 5G networks passively by analyzing synchronization and broadcast signals.

Read more

5G mobile network testing using a passive network scanner (Part 2)

August 8, 2022 | by Corbett Rowell

Technical Background and Measurement Setup

In the previous introductory blog post: 5G mobile network testing using a passive network scanner (Part 1), we discussed why a dedicated scanner is necessary for accurate mobile network testing. This post explains the technical background and the setup of the measurements in FR1 and FR2.

Read more

5G mobile network testing using a passive network scanner (Part 1)

June 23, 2022 | by Corbett Rowell

Introduction

This new blog series emphasizes the importance of passive mobile network testing for the technology and deployment verification of 5G NR in the field and its future development. This introduction covers the main topics that will be detailed in later posts of this series.

Read more

5G site testing and troubleshooting mobile networks

March 21, 2022 | by Peter Busch

Commercial 5G rollout is happening now and more and more 5G non-standalone (NSA) sites are being deployed. Existing LTE infrastructure is being converted into dynamic spectrum sharing (DSS) hybrid sites supporting 5G. An increasing number of private regional 5G networks in standalone (SA) mode are going into trial phase.

Read more

How network testing ensures high quality in-building LTE and 5G deployments

August 17, 2021 | by Adrian Maurer

The popularity of app services, particularly video streaming, among smartphone users is expected to result in a 10-fold increase in data consumption over the next five years. Most of today’s mobile data traffic is generated indoors and this trend is set to continue into the future. While indoor use certainly includes users’ homes, in this context it mostly concerns large offices, public buildings and commercial properties.

Read more

Understanding and troubleshooting interference in 5G NR networks

July 22, 2021 | by Manuel Mielke

Interference is a complicated topic with manifold root causes and impacts on network performance. So, let's try to simplify the topic of interference by giving it some structure. In our last blog posts about network synchronization we learned a lot about internal interference, which comes from the network itself e.g. due to a lack of time synchronization. Now let's take a look at the second type of interference. It is called external interference.

Read more

Network synchronization in the time domain (part 2)

March 5, 2021 | by Manuel Mielke

Network operators have to make sure that synchronizing their networks will not produce any interference. Synchronization can affect several levels, these include synchronization on a relative time base, which was part of the blog post part 1 and extend to synchronization on an absolute time raster. Why? You can read all about it in part 2 of our blog post.

Read more

Network synchronization in the time domain (part 1)

January 14, 2021 | by Manuel Mielke

Network synchronization requirements are as old as digital cellular mobile networks. As soon as cells have a neighbor relationship, network synchronization is mandatory in both the frequency and time domain. How does 5G NR with its extremely flexible specifications affect these synchronization requirements, and how can they be measured?

Read more

Code-selective electromagnetic field (EMF) measurements (part 2)

August 18, 2020 | by Manuel Mielke

In part 1 of this article series about the electromagnetic field (EMF) measurements procedures, we explained the different measurement concepts, namely the code-selective and frequency-selective method. Now, learn how the code-selective EMF method offers mobile operators and infrastructure suppliers the best trade-off between EMF exposure limits and optimized coverage and capacity.

Electromagnetic field measurements in 5G: Overview and concepts (part 1)

May 20, 2020 | by Manuel Mielke

Why are electromagnetic field (EMF) measurements critical for the widespread rollout of 5G NR, and how do you measure electromagnetic radiation? Learn more about the two fundamentally different EMF measurement procedures – frequency-selective versus code-selective – and the arguments in favor of the latter.

5G site testing and troubleshooting

November 19, 2019 | by Peter Busch

Commercial 5G rollout is happening, and the rate of deployment of 5G non-standalone (NSA) sites steadily increases. Each new installation needs to be verified to ensure correct network performance and quality of service. 5G site testing requires specialist mobile network testing solutions that meet the RAN architecture’s new demands, including over-the-air connectivity and KPIs.

Read more

Benchmarking & optimization

More information

Innovations in mobile network testing

More information

Testing from RF to QoE

More information

New e-book provides unparalleled insight into the 5G NR world

What's the status of 5G NR? What are the test and measurement requirements, and how do we approach them? Download our new e-book now and get unparalleled insight into the world of 5G NR.

More information

The world's first 5G NR network measurement solution

Rohde & Schwarz is pioneering 5G New Radio (5G NR) network measurements with the world's first commercially available 5G NR network measurement solution. This solution enables users in the 5G network ecosystem as well as regulators to measure the 5G NR network coverage accurately - one of the biggest challenges in the network planning.

More information

Pioneers in NB-IoT field measurements

We are paving the way to NB-IoT by provding the world's first accurate LTE/NB-IoT coverage measurement solution: via a software upgrade, the R&S ROMES drive test software now also supports NB-IoT coverage measurements with R&S TSMx scanners.

More information